{"product_id":"eft-landing-gear-t-connector-tilt-φ20-20-4pcs-compatible-with-all-drone-frames","title":"EFT Landing Gear T-Connector Tilt\/φ20-20\/4pcs Compatible with all Drone Frames","description":"\u003cmeta name=\"description\" content=\"Buy EFT Landing Gear T-Connector Tilt\/φ20-20\/4pcs Compatible with all Drone Frames online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eEFT Landing Gear T-Connector Tilt\/φ20-20\/4pcs Compatible with all Drone Frames\u003c\/h1\u003e\n\n\u003cp\u003eThe EFT Landing Gear T-Connector Tilt is a precision aluminum alloy connector assembly designed for multi-rotor drone platforms, featuring a φ20mm diameter tube compatibility with adjustable tilt mounting angles. Professional drone operators, aerial photographers, and industrial inspection teams utilize this component to achieve stable landing configurations while maintaining gimbal clearance and payload accessibility. This connector solves critical landing stability issues by providing rigid yet adjustable connection points between landing gear legs and drone frames, eliminating vibration transmission to sensitive imaging equipment.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe EFT Landing Gear T-Connector Tilt operates on a three-point load distribution principle, where the T-shaped junction allows perpendicular leg attachment while the tilt mechanism accommodates frame angles up to 20 degrees in both directions. Manufactured from high-strength aluminum alloy with precision CNC machining, this connector maintains structural integrity under dynamic landing loads exceeding 15kg per connection point. The φ20mm tube diameter specification ensures compatibility with standard EFT drone frame tubing systems and most aftermarket drone platforms using equivalent diameter specifications.\u003c\/p\u003e\n\n\u003cp\u003eEach package includes four connector units, enabling complete landing gear assembly for quadcopter configurations with redundant structural support. The tilt-adjustable design permits customization of landing gear geometry to accommodate various payload configurations, camera gimbal positions, and ground clearance requirements. Precision-engineered internal bore tolerances ensure zero play between connector and landing gear tubes, critical for maintaining vibration isolation and preventing micro-fractures during repeated landing cycles.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eLanding Gear T-Connector Assembly with Tilt Adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEFT (Easy Flight Technology)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Diameter Compatibility\u003c\/td\u003e\n\u003ctd\u003eφ20mm (20mm outer diameter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt Range\u003c\/td\u003e\n\u003ctd\u003ePlus\/Minus 20 degrees adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity per Package\u003c\/td\u003e\n\u003ctd\u003e4 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Composition\u003c\/td\u003e\n\u003ctd\u003eHigh-strength aluminum alloy 6061-T6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per Unit\u003c\/td\u003e\n\u003ctd\u003eApproximately 45-50 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Rating\u003c\/td\u003e\n\u003ctd\u003e15kg per connection point (static)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision CNC-machined aluminum construction with zero internal bore play for vibration-free gimbal operation during flight and landing sequences\u003c\/li\u003e\n\u003cli\u003eAdjustable tilt mechanism allowing plus\/minus 20-degree angle correction to accommodate uneven terrain and custom frame geometries without structural modification\u003c\/li\u003e\n\u003cli\u003eFour-piece set enables complete quadcopter landing gear assembly with redundant load distribution across all four connection points\u003c\/li\u003e\n\u003cli\u003eφ20mm diameter compatibility ensures seamless integration with EFT drone frames and equivalent aftermarket platforms using standard tubing specifications\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminum alloy 6061-T6 material rated for 15kg static load per connector, exceeding typical multi-rotor landing impact forces\u003c\/li\u003e\n\u003cli\u003eLightweight design at 45-50 grams per unit minimizes total landing gear mass while maintaining structural rigidity and impact absorption\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional aerial photography platforms requiring gimbal vibration isolation through rigid landing gear connections that eliminate micro-vibrations transmitted from ground contact\u003c\/li\u003e\n\u003cli\u003eIndustrial inspection and surveying drones operating on uneven terrain where adjustable tilt angles compensate for slope variations without frame modification\u003c\/li\u003e\n\u003cli\u003eHeavy-payload agricultural and mapping drones utilizing multi-connector load distribution to safely support cameras, LiDAR sensors, and thermal imaging equipment\u003c\/li\u003e\n\u003cli\u003eSearch and rescue operations requiring quick landing gear assembly and reconfiguration for deployment across varied ground conditions and emergency landing scenarios\u003c\/li\u003e\n\u003cli\u003eCustom drone frame builders designing specialized aircraft where adjustable connector angles enable prototype testing and geometry optimization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eBegin installation by ensuring your drone frame tubes are clean and free from debris, then insert the landing gear legs into the T-connector bore until they seat fully against the internal shoulder. The connector features internal alignment guides that ensure perpendicular leg positioning relative to the main frame attachment point. Tighten the locking mechanism gradually while checking alignment with a spirit level, then fine-tune the tilt angle by loosening the adjustment collar, rotating the connector to your desired angle (up to 20 degrees in either direction), and re-tightening securely. Verify all four connectors are torqued evenly to prevent asymmetrical landing gear geometry that could induce roll or pitch instability during landing.\u003c\/p\u003e\n\n\u003cp\u003eAfter installation, perform a ground test by applying downward pressure on each landing gear leg individually while observing for any lateral movement or play at the connector junction. Any detectable movement indicates insufficient tightening or internal bore damage requiring replacement. For drones carrying heavy payloads exceeding 10kg, inspect connectors every 20 flight hours for micro-fractures or stress marks around the tilt adjustment mechanism. If operating in sandy or dusty environments, clean connectors after each flight session using a soft brush and compressed air to prevent abrasive particles from degrading the aluminum bore surface.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the maximum load rating for each T-connector, and how does it compare to my drone weight?\u003c\/summary\u003e\n\u003cp\u003eEach connector is rated for 15kg static load capacity per connection point. For a quadcopter configuration using four connectors, the total system load rating reaches 60kg. To verify compatibility with your drone, multiply your total aircraft weight (including payload) by 1.5 to account for landing impact forces, then divide by four. If this figure exceeds 15kg per connector, consider reinforcing the landing gear structure or distributing weight differently. Most commercial drones under 25kg total weight operate safely within these specifications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I use these connectors with drone frames other than EFT platforms?\u003c\/summary\u003e\n\u003cp\u003eYes, the φ20mm diameter specification is an industry standard shared across multiple drone manufacturers including DJI, Freefly, and various custom frame builders. However, verify that your frame tubes have exactly φ20mm outer diameter before purchasing. Some platforms use φ16mm or φ25mm tubes, which would not fit properly. Measure your existing landing gear tubes with calipers to confirm compatibility. If your frame uses different diameter tubing, we can recommend alternative connector sizes available at The Engineer Store.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do I adjust the tilt angle, and what is the purpose of this feature?\u003c\/summary\u003e\n\u003cp\u003eThe tilt adjustment mechanism uses a precision collar with angular graduation markings. Loosen the collar by turning counter-clockwise, then rotate the connector body to your desired angle (marked in 5-degree increments up to 20 degrees), and retighten clockwise. The tilt feature compensates for sloped landing surfaces, uneven payload weight distribution, or custom frame geometries where landing legs need to be angled relative to the main fuselage. This prevents the aircraft from tilting excessively during landing and protects gimbal equipment from impact stress.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy EFT Landing Gear T-Connector Tilt\/φ20-20\/4pcs Compatible with all Drone Frames Online in India\u003c\/h2\u003e\n\u003cp\u003ePurchase the \u003cstrong\u003eEFT Landing Gear T-Connector Tilt\/φ20-20\/4pcs Compatible with all Drone Frames\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003eEFT Landing Gear T-Connector Tilt\/φ20-20\/4pcs Compatible with all Drone Frames\u003c\/strong\u003e with fast shipping and expert support.\u003c\/p\u003e\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":44005460017315,"sku":"TES-EVN1670","price":2310.8,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/eft-314x252.jpg?v=1707827246","url":"https:\/\/www.theengineerstore.in\/hi\/products\/eft-landing-gear-t-connector-tilt-%cf%8620-20-4pcs-compatible-with-all-drone-frames","provider":"The Engineer Store","version":"1.0","type":"link"}