28% off
Capacitance Meter Kit
To measure Direct Current
Application in automobile repair, DIY, etc.
Specifications:
If current> 3A, the orange display lights up.
The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).
Note:
Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.
To measure Alternating Current
Press the "Z/F" button to swith to AC Measurement
Specifications:
If current> 3A, the orange display lights up.
The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).
Note:
To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.
Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.
You may also like
Capacitance Meter Kit
To measure Direct Current
Application in automobile repair, DIY, etc.
Specifications:
If current> 3A, the orange display lights up.
The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).
Note:
Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.
To measure Alternating Current
Press the "Z/F" button to swith to AC Measurement
Specifications:
If current> 3A, the orange display lights up.
The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).
Note:
To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.
Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.
You may also like
You may also like
Sale
Sale
Sale
Sale
