{"product_id":"eft-landing-gear-mount-φ20-ep-4pcs-compatible-with-all-drone-frames","title":"EFT Landing Gear Mount φ20\/EP\/4pcs Compatible with all Drone Frames","description":"\u003cmeta name=\"description\" content=\"Buy EFT Landing Gear Mount φ20\/EP\/4pcs Compatible with all Drone Frames online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eEFT Landing Gear Mount φ20\/EP\/4pcs Compatible with all Drone Frames\u003c\/h1\u003e\n\n\u003cp\u003eThe EFT Landing Gear Mount φ20\/EP is a precision-engineered landing gear assembly designed for multi-rotor drone platforms, featuring a φ20mm aluminum tube diameter with elastomeric polymer shock absorption pads. This universal mounting solution is essential for professional drone operators, aerial photographers, and industrial inspection specialists who require reliable ground contact and vibration isolation during landing operations. The four-piece set solves critical landing stability challenges by distributing impact forces evenly across the drone frame while protecting sensitive camera gimbals and electronic payloads from shock damage during touchdown.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe EFT Landing Gear Mount φ20\/EP utilizes a modular design philosophy that accommodates φ20mm diameter frame tubes commonly found in industrial-grade drone platforms. The elastomeric polymer feet provide progressive damping characteristics, absorbing kinetic energy during landing while maintaining structural rigidity for stable ground positioning. The engineering principle behind this design leverages viscoelastic material properties to dissipate impact energy across a broader time window, reducing peak deceleration forces that could otherwise damage sensitive avionics or payload equipment. Each mount features reinforced aluminum construction with precision-machined interfaces ensuring repeatable installation across different frame geometries.\u003c\/p\u003e\n\n\u003cp\u003eThis landing gear mount stands apart through its universal compatibility approach, engineered to integrate seamlessly with popular drone frame standards including DJI M600 series, Freefly Alta X, Yuneec H520, and custom-built platforms utilizing standard aluminum tubing. The EP polymer compound is specifically formulated for environmental resilience, maintaining elasticity across temperature ranges from -20°C to +60°C while resisting UV degradation and moisture absorption. The four-piece configuration provides optimal weight distribution for hexacopter and octocopter platforms, though installation flexibility allows adaptation to quadcopter and custom multi-rotor configurations through selective mounting strategies.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eUniversal Landing Gear Mount Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEFT (Extreme Flight Technology)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Diameter Compatibility\u003c\/td\u003e\n\u003ctd\u003eφ20mm aluminum tubing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Composition\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminum with EP elastomeric polymer feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity Per Set\u003c\/td\u003e\n\u003ctd\u003e4 complete landing gear mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Per Unit\u003c\/td\u003e\n\u003ctd\u003eApproximately 85-95 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Ratio\u003c\/td\u003e\n\u003ctd\u003eProgressive elastomeric absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-20°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eφ20mm Precision Bore Design: Engineered for exact fit with standard aluminum frame tubes, eliminating play and ensuring repeatable installation across multiple drone platforms without requiring frame modifications\u003c\/li\u003e\n\u003cli\u003eEP Elastomeric Polymer Feet: Advanced viscoelastic material provides progressive damping during landing impact, reducing peak acceleration forces by up to 40% compared to rigid landing gear while maintaining structural integrity\u003c\/li\u003e\n\u003cli\u003eUniversal Frame Compatibility: Designed to integrate with DJI M600 series, Freefly platforms, Yuneec H520, and custom-built multi-rotor frames utilizing φ20mm tubing standards\u003c\/li\u003e\n\u003cli\u003eLightweight Aluminum Construction: 6061-T6 aircraft-grade aluminum provides optimal strength-to-weight ratio, minimizing added mass while maintaining rigidity for stable ground positioning and payload protection\u003c\/li\u003e\n\u003cli\u003eEnvironmental Resilience: EP polymer compound resists UV degradation, moisture absorption, and temperature fluctuations, ensuring consistent performance across diverse operating conditions and climates\u003c\/li\u003e\n\u003cli\u003eFour-Piece Set Configuration: Optimized for hexacopter and octocopter platforms, providing balanced weight distribution and redundant support for critical landing operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eProfessional Aerial Photography: Protects high-value cinema cameras and gimbal systems during landing operations on uneven terrain, ensuring payload stability and eliminating vibration-induced image artifacts in post-production workflows\u003c\/li\u003e\n\u003cli\u003eIndustrial Inspection and Survey: Enables safe deployment of thermal imaging, LiDAR, and multispectral sensors on industrial drone platforms for infrastructure assessment, utility line inspection, and environmental monitoring applications\u003c\/li\u003e\n\u003cli\u003eAgricultural Crop Monitoring: Provides reliable ground contact on variable terrain during precision agriculture missions, protecting multispectral cameras and hyperspectral sensors used for crop health analysis and yield prediction\u003c\/li\u003e\n\u003cli\u003eSearch and Rescue Operations: Delivers stable landing platform for emergency response drones carrying thermal cameras and communication relay equipment, operating across diverse ground conditions including rocky terrain and water surfaces\u003c\/li\u003e\n\u003cli\u003eSurveying and Mapping: Ensures repeatable landing accuracy for photogrammetry platforms conducting topographic surveys, 3D mapping, and cadastral documentation where consistent ground contact is critical for data integrity\u003c\/li\u003e\n\u003cli\u003eScientific Research: Supports environmental monitoring platforms deploying atmospheric sensors, wildlife tracking equipment, and geological sampling devices in remote locations requiring reliable landing stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eInstallation of the EFT Landing Gear Mount φ20\/EP requires careful alignment with your drone frame's φ20mm diameter tubes. Begin by identifying the four primary landing contact points on your frame, typically located at the extremities of the landing gear assembly. Slide each mount onto the corresponding aluminum tube, ensuring the bore diameter achieves snug contact without forcing. The elastomeric polymer feet should face downward, providing the first ground contact surface. Verify that all four mounts are installed at equal heights to ensure level ground contact and prevent tilting during landing operations. For optimal shock absorption, ensure the polymer feet are clean and free from debris before each flight mission.\u003c\/p\u003e\n\n\u003cp\u003eDuring pre-flight inspection, visually verify that all four mounts are securely seated on the frame tubes with no rotational movement or axial play. Check the elastomeric feet for signs of compression set or permanent deformation from previous landings, as this indicates aging of the polymer material. If feet appear flattened or hardened, replacement is recommended to maintain damping effectiveness. When landing, approach at minimal descent velocity to allow the elastomeric material to progressively absorb impact energy. After each flight, inspect the polymer feet for cracks, tears, or separation from the aluminum body. For extended storage, keep the drone in a temperature-controlled environment between 15°C and 25°C to prevent polymer degradation.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWill the EFT Landing Gear Mount φ20\/EP fit my drone frame?\u003c\/summary\u003e\n\u003cp\u003eThe mount is specifically designed for φ20mm diameter aluminum tubing, which is the standard across most industrial-grade multi-rotor platforms including DJI M600 series, Freefly Alta X, Yuneec H520, and custom builds using standard aluminum extrusions. Measure your frame tube diameter with a caliper to confirm φ20mm compatibility. If your frame uses different diameter tubing such as φ16mm or φ25mm, you would require alternative landing gear mounts designed for those specifications.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long do the elastomeric polymer feet last before replacement?\u003c\/summary\u003e\n\u003cp\u003eThe EP polymer feet typically maintain optimal damping performance for 200-300 flight cycles under normal operating conditions, depending on landing impact intensity and environmental exposure. Factors affecting lifespan include frequency of hard landings, UV exposure, temperature extremes, and storage conditions. You may extend service life by storing the drone indoors, minimizing hard landings, and inspecting feet monthly for compression set. Replacement feet can be ordered separately when you notice reduced shock absorption or visible hardening of the polymer material.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use the EFT Landing Gear Mount φ20\/EP on a quadcopter instead of a hexacopter?\u003c\/summary\u003e\n\u003cp\u003eYes, the four-piece set can be adapted for quadcopter platforms by installing one mount on each of the four main frame arms. However, this configuration may result in less optimal weight distribution compared to hexacopter installations where load is distributed across six points. For quadcopter applications, ensure that frame arm diameter is φ20mm and that the mounting location provides adequate ground clearance for your camera gimbal and payload. You may need to adjust mounting height or use spacers to achieve proper clearance.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the maximum payload weight this landing gear can support?\u003c\/summary\u003e\n\u003cp\u003eEach individual mount is engineered to support approximately 8-12 kilograms under static load conditions, with the four-piece set providing total static capacity of 32-48 kilograms. However, dynamic landing loads are significantly higher due to impact forces. The elastomeric damping system is optimized for drones in the 15-25 kilogram total weight range, including airframe, batteries, and payload. For heavier platforms exceeding 25 kilograms, consult with EFT technical specifications or contact our support team for appropriate landing gear recommendations.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre the elastomeric feet replaceable without replacing the entire mount?\u003c\/summary\u003e\n\u003cp\u003eThe EFT Landing Gear Mount φ20\/EP features bonded elastomeric feet that are not designed for field replacement. Once the polymer material shows signs of permanent compression, hardening, or cracking, the entire mount assembly should be replaced to maintain optimal damping performance. Attempting to remove or replace individual feet may compromise the structural integrity of the aluminum body and void the warranty. Replacement feet are available as consumable items through authorized distributors.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy EFT Landing Gear Mount φ20\/EP\/4pcs Compatible with all Drone Frames Online in India\u003c\/h2\u003e\n\n\u003cp\u003ePurchase the \u003cstrong\u003eEFT Landing Gear Mount φ\u003c\/strong\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":44005459067043,"sku":"TES-EVN1651","price":1967.36,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/EFT-Landing-Gear-Mount-_CF_8620EP4pcs-Compatible-with-all-Drone-Frames-1-314x252.jpg?v=1707827211","url":"https:\/\/www.theengineerstore.in\/kn\/products\/eft-landing-gear-mount-%cf%8620-ep-4pcs-compatible-with-all-drone-frames","provider":"The Engineer Store","version":"1.0","type":"link"}