{"product_id":"nooelec-sawbird-goes-barebones-premium-saw-filter-and-cascaded-ultra-low-noise-lna-module","title":"Nooelec SAWbird+ GOES Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise LNA Module","description":"\u003cmeta name=\"description\" content=\"Buy Nooelec SAWbird+ GOES Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise LNA Module online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eNooelec SAWbird+ GOES Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise LNA Module\u003c\/h1\u003e\n\n\u003cp\u003eThe Nooelec SAWbird+ GOES Barebones is a professional-grade RF front-end module specifically engineered for GOES weather satellite reception and NOAA signal acquisition in the 1.6-1.7 GHz L-band frequency range. This module combines a high-performance Surface Acoustic Wave (SAW) filter with cascaded ultra-low noise amplification to deliver exceptional signal clarity for meteorological and environmental monitoring applications. Radio astronomers, weather satellite enthusiasts, and professional meteorological stations rely on this module to achieve signal-to-noise ratios that enable reliable reception of critical weather data and atmospheric measurements.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe SAWbird+ GOES Barebones represents the pinnacle of RF signal conditioning technology for satellite weather applications. At its core, the module employs a precision-tuned Surface Acoustic Wave filter centered at 1.6925 GHz with a 2 MHz passband, providing exceptional out-of-band rejection and spurious signal suppression. This SAW filter stage eliminates interference from adjacent frequency bands, protecting the sensitive low-noise amplifier from intermodulation products and reducing the overall noise figure of the system. The cascaded LNA architecture features multiple gain stages with optimized impedance matching networks, achieving a noise figure of approximately 0.6 dB while maintaining a flat gain response across the GOES reception band.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes the SAWbird+ GOES from generic RF amplifiers is its integrated approach to impedance transformation and gain distribution. The module incorporates careful PCB layout with controlled-impedance transmission lines, precision component selection, and thermal management considerations that prevent gain compression during extended reception sessions. The barebones configuration provides maximum flexibility for integration into custom receiving systems, allowing engineers to mount the module directly onto their antenna feed networks or integrate it into larger RF subsystems. The compact form factor and standardized SMA connectors ensure compatibility with standard satellite reception equipment while maintaining the signal integrity critical for weather data demodulation.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSAW Filter and Cascaded Ultra-Low Noise LNA Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eNooelec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter Frequency\u003c\/td\u003e\n\u003ctd\u003e1.6925 GHz (GOES L-band)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassband Width\u003c\/td\u003e\n\u003ctd\u003e2 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise Figure\u003c\/td\u003e\n\u003ctd\u003eApproximately 0.6 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003eApproximately 20-25 dB cascaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\/Output Connectors\u003c\/td\u003e\n\u003ctd\u003eSMA Female connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eRequires external DC bias (typically 5V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eBarebones PCB module for direct integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePrecision SAW Filter with 2 MHz passband centered at 1.6925 GHz providing superior out-of-band rejection and interference suppression for clean GOES signal reception\u003c\/li\u003e\n\u003cli\u003eCascaded ultra-low noise amplifier architecture achieving 0.6 dB noise figure, maximizing weak signal detection capability for reliable weather satellite data acquisition\u003c\/li\u003e\n\u003cli\u003eOptimized impedance matching networks throughout the signal chain ensuring minimal insertion loss and maximum power transfer efficiency from antenna to receiver\u003c\/li\u003e\n\u003cli\u003eIntegrated thermal management design preventing gain compression and maintaining stable performance during extended continuous reception operations\u003c\/li\u003e\n\u003cli\u003eBarebones configuration with SMA connectors enabling seamless integration into custom RF systems, antenna feed networks, and professional meteorological stations\u003c\/li\u003e\n\u003cli\u003eCompact PCB layout with controlled-impedance transmission lines preserving signal integrity and minimizing phase noise in the critical L-band frequency range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eNOAA GOES Weather Satellite Reception: Professional meteorological stations and weather monitoring networks use this module to receive real-time satellite imagery, atmospheric pressure data, and severe weather alerts with superior signal quality and minimal data corruption\u003c\/li\u003e\n\u003cli\u003eRadio Astronomy and L-band Observations: Radio astronomers integrate this module into their receiving systems for observing celestial objects and phenomena in the 1.6-1.7 GHz band with enhanced sensitivity and reduced system noise\u003c\/li\u003e\n\u003cli\u003eEnvironmental Monitoring and Climate Research: Research institutions employ this front-end module for acquiring long-term atmospheric and environmental data from GOES satellites, enabling climate trend analysis and weather pattern studies\u003c\/li\u003e\n\u003cli\u003eEmergency Response and Disaster Management: Emergency management agencies and disaster response teams rely on GOES satellite data received through this module for real-time situational awareness during hurricanes, floods, and other severe weather events\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eTo integrate the Nooelec SAWbird+ GOES Barebones into your receiving system, first identify the optimal mounting location near your L-band antenna feed, minimizing cable runs between the antenna and the LNA input to preserve the signal-to-noise ratio advantage. Connect the antenna feed line to the SMA input connector, ensuring proper impedance matching and secure connector seating. Route the SMA output connector to your software-defined radio (SDR) receiver or professional weather satellite receiver, maintaining controlled-impedance cabling where possible to prevent reflections and signal degradation.\u003c\/p\u003e\n\n\u003cp\u003eThe module requires external DC bias power, typically 5 volts, supplied through a bias tee or dedicated power injection circuit. Consult the specific pinout documentation to identify the bias connection point on the PCB. Once powered, allow the module to stabilize for several minutes before initiating satellite reception, as the cascaded amplifier stages require thermal equilibration. Monitor the received signal strength and quality metrics in your reception software, adjusting antenna orientation and elevation angle to maximize the signal level while maintaining a clean, noise-free data stream from your GOES satellite receiver.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SAWbird+ GOES and generic L-band LNA modules?\u003c\/summary\u003e\n\u003cp\u003eThe SAWbird+ GOES incorporates a precision-tuned Surface Acoustic Wave filter specifically designed for the GOES satellite frequency band (1.6925 GHz), providing superior out-of-band rejection compared to generic wideband amplifiers. This SAW filter eliminates interference from adjacent bands before amplification, resulting in a lower overall system noise figure and better signal quality. Generic L-band modules typically lack this specialized filtering, making them susceptible to intermodulation products and interference from cellular, GPS, and other L-band services operating nearby.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use this module with any SDR receiver or weather satellite receiver?\u003c\/summary\u003e\n\u003cp\u003eYes, the SAWbird+ GOES Barebones is compatible with any receiver that accepts standard SMA input connectors and operates in the L-band frequency range. Popular options include RTL-SDR dongles with bias tee support, professional NOAA weather receivers, and software-defined radio platforms. However, you must ensure your receiver or bias tee can supply the required DC bias voltage (typically 5V) to power the LNA stages. Always verify connector compatibility and bias voltage specifications before connecting to avoid damaging the module or your receiver equipment.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat cable length should I use between the antenna and the SAWbird+ module?\u003c\/summary\u003e\n\u003cp\u003eMinimize cable length between your antenna and the LNA input to preserve the noise figure advantage of the low-noise amplifier. Ideally, keep this distance under 1 meter using high-quality, low-loss coaxial cable such as LMR-400 or equivalent. Every meter of standard RG-58 cable introduces approximately 0.5-1 dB of loss at 1.7 GHz, which directly degrades your system noise figure and signal reception capability. If longer cable runs are necessary, upgrade to lower-loss cable types to maintain optimal performance.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes the module require any special power supply or bias tee?\u003c\/summary\u003e\n\u003cp\u003eThe SAWbird+ GOES Barebones requires external DC bias power, typically 5 volts at approximately 100-200 mA, depending on the specific amplifier configuration. You can supply this power through a dedicated bias tee circuit connected to your receiver, or through a separate power supply with appropriate filtering and decoupling. The bias tee must isolate the DC power from your RF signal path to prevent impedance mismatches. Many modern SDR receivers and weather satellite receivers include built-in bias tee functionality, eliminating the need for external components.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy Nooelec SAWbird+ GOES Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise LNA Module Online in India\u003c\/h2\u003e\n\n\u003cp\u003ePurchase the \u003cstrong\u003eNooelec SAWbird+ GOES Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise LNA Module\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003eNooelec SAWbird+ GOES Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise LNA Module\u003c\/strong\u003e with fast shipping and expert support.\u003c\/p\u003e\n\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":43853781991587,"sku":"TES-EV02845","price":5462.18,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/100791-228x228.jpg?v=1704192417","url":"https:\/\/www.theengineerstore.in\/kn\/products\/nooelec-sawbird-goes-barebones-premium-saw-filter-and-cascaded-ultra-low-noise-lna-module","provider":"The Engineer Store","version":"1.0","type":"link"}