P10 RED DIP Outdoor LED Display Module 160x320mm

The P10 RED DIP Outdoor LED Display Module is a professional-grade LED panel featuring a 160x320mm display area with 10mm pixel pitch, delivering high-brightness red monochrome output suitable for outdoor signage and information displays. This module utilizes discrete DIP LED technology with individual addressable pixels, enabling crisp text and graphics visibility in direct sunlight with brightness levels exceeding 4000 nits. Advertising agencies, transportation hubs, sports venues, and retail establishments rely on this module to create attention-grabbing outdoor displays that remain visible in challenging ambient light conditions.

Product Overview

The P10 RED DIP module operates on a multiplexed scanning architecture where LED rows are sequentially illuminated at high refresh rates (typically 1920Hz or higher) to create stable, flicker-free images. The 10mm pixel pitch represents the distance between adjacent LED centers, determining the optimal viewing distance and resolution capability. With a 1/4 or 1/5 scanning ratio depending on configuration, this module achieves consistent brightness uniformity across the display area while maintaining low power consumption through intelligent current limiting circuits. The red monochrome design simplifies signal processing and reduces bandwidth requirements compared to full-color alternatives, making it ideal for applications requiring simple text and icon display.

The DIP LED construction provides superior weather resistance with individual LED encapsulation protecting against moisture, dust, and UV radiation. The module features a robust aluminum or steel frame with IP65-rated connector interfaces, ensuring reliable operation in harsh outdoor environments. Thermal management is achieved through natural convection and optional heatsink integration, maintaining optimal LED junction temperatures even during continuous operation in high ambient temperatures. The standardized 16-pin or 20-pin connector interface allows seamless integration with industry-standard LED control systems and multiplexing drivers.

Key Specifications

Specification	Details
Product Type	Outdoor LED Display Module - Red Monochrome
Display Size	160x320mm
Pixel Pitch	10mm
Resolution	16x32 pixels
LED Type	DIP Red LEDs with individual packaging
Brightness	4000-5000 nits (typical)
Viewing Angle	140 degrees horizontal, 120 degrees vertical
Refresh Rate	1920Hz or higher
Scan Ratio	1/4 or 1/5 multiplexing
Operating Voltage	5V DC
Power Consumption	Approximately 60-80W (full brightness)
IP Rating	IP65 - Dust and water resistant
Operating Temperature	-20°C to +60°C
Interface	16-pin or 20-pin standard LED connector
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp

Key Features

• High Brightness Output: 4000-5000 nits ensures excellent visibility in direct sunlight and high ambient light conditions without image washout
• Wide Viewing Angles: 140-degree horizontal and 120-degree vertical viewing angles provide consistent image quality across broad audience perspectives
• Robust IP65 Rating: Complete protection against dust ingress and water spray, enabling reliable operation in outdoor weather conditions including rain and humidity
• DIP LED Technology: Individual LED encapsulation delivers superior color consistency, extended lifespan (50,000+ hours), and enhanced reliability compared to SMD alternatives
• Low Maintenance Design: Sealed connectors and weather-resistant housing minimize maintenance requirements and extend operational life in harsh environments
• Energy Efficient: Optimized current distribution and multiplexing architecture reduce power consumption while maintaining peak brightness levels

Applications and Use Cases

• Outdoor Advertising Signage: Real estate developers and advertising agencies deploy P10 RED modules for billboard displays, storefront promotions, and directional signage with dynamic text updates
• Public Transportation Hubs: Railway stations, bus terminals, and airport information displays utilize these modules for arrival/departure boards and passenger guidance with high-contrast red text
• Sports and Event Venues: Stadiums, cricket grounds, and outdoor event spaces use P10 modules for scoreboard displays, sponsor advertisements, and crowd information systems
• Traffic and Safety Systems: Traffic control centers and emergency services deploy these modules for alert messages, speed displays, and critical safety notifications visible from considerable distances
• Industrial and Commercial Facilities: Manufacturing plants, warehouses, and logistics centers use P10 displays for production status boards, safety alerts, and operational metrics

How to Use

Installation of the P10 RED DIP module requires proper power supply configuration and signal interface connection. Begin by mounting the module securely to your display structure using the mounting brackets, ensuring the module is level and protected from direct water spray. Connect the 5V DC power supply to the designated power connectors, verifying polarity to prevent damage. The signal interface requires connection to an LED control card or multiplexing driver that sends synchronized row and column scanning signals. Most modules use standard 16-pin connectors with dedicated pins for clock (CLK), data (DATA), latch (LAT), output enable (OE), and ground connections.

Configure your LED control software to match the module's scanning ratio (1/4 or 1/5) and refresh rate specifications. Test the display with simple patterns before deploying actual content. Ensure adequate ventilation around the module to prevent thermal buildup, particularly in high ambient temperature environments. For outdoor installations, apply weatherproof silicone sealant around connector areas and use cable glands to protect signal and power cables from moisture ingress. Regular maintenance involves checking connector integrity quarterly and cleaning the display surface with soft, dry cloths to maintain brightness output.

Frequently Asked Questions

What is the maximum viewing distance for the P10 RED DIP module?

With a 10mm pixel pitch and 4000+ nits brightness, the P10 module provides optimal viewing distance between 3 to 15 meters for text readability. At distances beyond 20 meters, individual pixels become less distinguishable, making it suitable for large-scale signage. The high brightness ensures visibility even in direct sunlight without image degradation at these distances.

Can I daisy-chain multiple P10 modules to create larger displays?

Yes, multiple P10 modules can be cascaded to create larger display arrays. This requires connecting the output signals from one module to the input of the next module in series. Your LED control card must support the extended resolution and provide sufficient current capacity for all modules. Proper synchronization of clock and latch signals across all modules is critical for flicker-free operation.

What type of LED control card do I need for this module?

The P10 RED module requires an LED multiplexing driver card that supports 1/4 or 1/5 scanning ratios with 5V output. Standard LED control cards from manufacturers like Novastar, Linsn, or generic Chinese suppliers with 16-pin HUB75 connectors are compatible. Verify the control card specifications match your module's scanning configuration before purchase to ensure proper operation.

How do I protect the module from rain and moisture in outdoor installations?

The IP65 rating provides protection against water spray, but for maximum protection in heavy rain, install the module under an overhang or protective canopy. Use weatherproof cable glands for all cable entries, apply silicone sealant around connector areas, and ensure proper drainage around the mounting structure. Regular inspection of seals and connectors prevents moisture-related failures.

What is the expected lifespan of the DIP LEDs in this module?

DIP red LEDs typically provide 50,000 to 100,000 hours of continuous operation before brightness degradation to 50% of initial output. At 12 hours daily operation, this translates to approximately 11-22 years of service life. Actual lifespan depends on operating temperature, brightness level, and environmental conditions.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy P10 RED DIP Outdoor LED Display Module 160x320mm Online in India

Purchase the P10 RED DIP Outdoor LED Display Module 160x320mm online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on P10 RED DIP Outdoor LED Display Module 160x320mm with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.