33% off
TTP223B Capacitive Touch Sensor Module
Add elegant, button-free touch control to your projects with the TTP223B Capacitive Touch Sensor Module. This compact, single-channel touch sensor detects finger contact through its sensing pad and outputs a clean digital signal - perfect for replacing mechanical buttons in Arduino, ESP32, and Raspberry Pi builds. Available at The Engineer Store, Bengaluru with fast shipping and full technical support.
Specifications
| IC / Chipset | TTP223B (Tontek Design Technology) |
| Operating Voltage | 2.0V - 5.5V DC |
| Output Modes | Toggle (Latching) or Momentary (Configurable via solder jumpers) |
| Output Type | Active High (default) / Active Low (configurable) |
| Output Signal | Digital HIGH/LOW (CMOS compatible) |
| Response Time | ~60ms (touch) / ~220ms (release) |
| Quiescent Current | ~1.5uA (ultra-low standby power) |
| Touch Channels | 1 (single-point capacitive sensing) |
| Sensing Pad Size | ~11mm x 10mm (on-board copper pad) |
| Module Dimensions | ~24mm x 24mm x 7mm |
| Interface Pins | 3 pins - VCC, GND, SIG (signal output) |
| Auto-Calibration | Yes - recalibrates automatically on power-up |
| Mounting | Through-hole header pins / breadboard compatible |
| Operating Temperature | -20 degreesC to +70 degreesC |
| Compatibility | Arduino, ESP32, ESP8266, Raspberry Pi, STM32, PIC, and all 3.3V/5V microcontrollers |
| Origin | Original/Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- True Capacitive Sensing: Detects the electrical properties of a human finger - no physical pressure required, eliminating mechanical wear and bounce issues.
- Ultra-Wide Voltage Range (2.0V-5.5V): Works natively with both 3.3V and 5V logic systems without any level shifting, making it universally compatible.
- Configurable Output Modes: Solder jumper pads on the PCB let you switch between momentary mode (output HIGH only while touching) and toggle/latch mode (touch once for ON, touch again for OFF).
- Active High or Active Low Output: A second solder jumper configures whether the output goes HIGH or LOW on touch detection - adapts to any circuit logic requirement.
- Micro-Power Consumption (~1.5uA standby): The TTP223B IC draws almost no current when idle, making it ideal for battery-powered and energy-harvesting projects.
- Fast Response with Auto-Calibration: Responds to touch in approximately 60ms and automatically calibrates its baseline capacitance at power-up to account for environmental conditions.
- Simple 3-Pin Interface: Only VCC, GND, and SIG - connect directly to any GPIO pin and read it as a digital input. No libraries, protocols, or complex wiring needed.
- Compact & Breadboard-Friendly: The tiny 24mm x 24mm footprint with standard 2.54mm header pins drops directly into breadboards or perfboards.
- Can Sense Through Non-Metallic Materials: Mount behind thin plastic, glass, acrylic, or wood panels (up to ~2-3mm) for completely sealed, waterproof touch interfaces.
Why Choose This?
- 100% authentic TTP223B modules sourced from trusted, authorized suppliers
- 1-5 day shipping, 7-8 day delivery across India from our Bengaluru warehouse
- Expert technical support included - wiring help, code examples, and troubleshooting
- Tested and verified before dispatch for reliable out-of-box performance
- Perfect entry point into capacitive sensing - no prior experience needed
Project Ideas
- Touch-Activated LED Lamp: Build a sleek desk lamp that turns on/off with a single finger tap - use toggle mode for latching control without any mechanical switch.
- Smart Home Touch Panels: Mount multiple TTP223B modules behind an acrylic panel to create a custom wall-mounted touch controller for lights, fans, and appliances via relay modules.
- Arduino Touch-Based Musical Instrument: Assign different tones to multiple touch sensors and build a capacitive piano or drum pad that plays sounds through a piezo buzzer or speaker.
- Proximity-Activated Display Wake: Use the sensor to detect when a user approaches and wake up an OLED or LCD display from sleep mode - great for IoT dashboards and kiosks.
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy TTP223B Capacitive Touch Sensor Module Online in India
Purchase the TTP223B Capacitive Touch Sensor Module online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on TTP223B Capacitive Touch Sensor Module with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy TTP223B Capacitive Touch Sensor Module at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.
TTP223B Capacitive Touch Sensor Module
Add elegant, button-free touch control to your projects with the TTP223B Capacitive Touch Sensor Module. This compact, single-channel touch sensor detects finger contact through its sensing pad and outputs a clean digital signal - perfect for replacing mechanical buttons in Arduino, ESP32, and Raspberry Pi builds. Available at The Engineer Store, Bengaluru with fast shipping and full technical support.
Specifications
| IC / Chipset | TTP223B (Tontek Design Technology) |
| Operating Voltage | 2.0V - 5.5V DC |
| Output Modes | Toggle (Latching) or Momentary (Configurable via solder jumpers) |
| Output Type | Active High (default) / Active Low (configurable) |
| Output Signal | Digital HIGH/LOW (CMOS compatible) |
| Response Time | ~60ms (touch) / ~220ms (release) |
| Quiescent Current | ~1.5uA (ultra-low standby power) |
| Touch Channels | 1 (single-point capacitive sensing) |
| Sensing Pad Size | ~11mm x 10mm (on-board copper pad) |
| Module Dimensions | ~24mm x 24mm x 7mm |
| Interface Pins | 3 pins - VCC, GND, SIG (signal output) |
| Auto-Calibration | Yes - recalibrates automatically on power-up |
| Mounting | Through-hole header pins / breadboard compatible |
| Operating Temperature | -20 degreesC to +70 degreesC |
| Compatibility | Arduino, ESP32, ESP8266, Raspberry Pi, STM32, PIC, and all 3.3V/5V microcontrollers |
| Origin | Original/Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- True Capacitive Sensing: Detects the electrical properties of a human finger - no physical pressure required, eliminating mechanical wear and bounce issues.
- Ultra-Wide Voltage Range (2.0V-5.5V): Works natively with both 3.3V and 5V logic systems without any level shifting, making it universally compatible.
- Configurable Output Modes: Solder jumper pads on the PCB let you switch between momentary mode (output HIGH only while touching) and toggle/latch mode (touch once for ON, touch again for OFF).
- Active High or Active Low Output: A second solder jumper configures whether the output goes HIGH or LOW on touch detection - adapts to any circuit logic requirement.
- Micro-Power Consumption (~1.5uA standby): The TTP223B IC draws almost no current when idle, making it ideal for battery-powered and energy-harvesting projects.
- Fast Response with Auto-Calibration: Responds to touch in approximately 60ms and automatically calibrates its baseline capacitance at power-up to account for environmental conditions.
- Simple 3-Pin Interface: Only VCC, GND, and SIG - connect directly to any GPIO pin and read it as a digital input. No libraries, protocols, or complex wiring needed.
- Compact & Breadboard-Friendly: The tiny 24mm x 24mm footprint with standard 2.54mm header pins drops directly into breadboards or perfboards.
- Can Sense Through Non-Metallic Materials: Mount behind thin plastic, glass, acrylic, or wood panels (up to ~2-3mm) for completely sealed, waterproof touch interfaces.
Why Choose This?
- 100% authentic TTP223B modules sourced from trusted, authorized suppliers
- 1-5 day shipping, 7-8 day delivery across India from our Bengaluru warehouse
- Expert technical support included - wiring help, code examples, and troubleshooting
- Tested and verified before dispatch for reliable out-of-box performance
- Perfect entry point into capacitive sensing - no prior experience needed
Project Ideas
- Touch-Activated LED Lamp: Build a sleek desk lamp that turns on/off with a single finger tap - use toggle mode for latching control without any mechanical switch.
- Smart Home Touch Panels: Mount multiple TTP223B modules behind an acrylic panel to create a custom wall-mounted touch controller for lights, fans, and appliances via relay modules.
- Arduino Touch-Based Musical Instrument: Assign different tones to multiple touch sensors and build a capacitive piano or drum pad that plays sounds through a piezo buzzer or speaker.
- Proximity-Activated Display Wake: Use the sensor to detect when a user approaches and wake up an OLED or LCD display from sleep mode - great for IoT dashboards and kiosks.
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy TTP223B Capacitive Touch Sensor Module Online in India
Purchase the TTP223B Capacitive Touch Sensor Module online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on TTP223B Capacitive Touch Sensor Module with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy TTP223B Capacitive Touch Sensor Module at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.