EFT Landing Gear Bar φ20*φ18*500/Shock-Absorbing Mat/2pcs Compatible with E410P/E610P

The EFT Landing Gear Bar is a precision-engineered landing support system designed for professional agricultural and industrial drone platforms, specifically the E410P and E610P models. This dual-unit package features shock-absorbing mat technology that dissipates impact energy during landing operations, protecting sensitive payload equipment and extending airframe longevity. The φ20*φ18*500mm aluminum tubing construction provides optimal structural rigidity while minimizing weight, making it essential for operators requiring reliable ground contact in demanding field conditions.

Product Overview

The EFT Landing Gear Bar system utilizes advanced elastomeric shock-absorption technology integrated within the mat interface to reduce landing impact forces by up to 60 percent compared to rigid landing surfaces. The dual-bar configuration distributes load evenly across the aircraft's contact points, preventing stress concentration and frame warping during rough terrain operations. The φ20 outer diameter provides structural integrity while the φ18 inner diameter accommodates standard attachment mechanisms found on E410P and E610P platforms. This design principle ensures compatibility across multiple EFT drone variants while maintaining consistent performance characteristics.

The shock-absorbing mat component utilizes closed-cell foam technology with embedded elastomer compounds that compress progressively during impact, creating a controlled deceleration curve rather than abrupt force transfer. This progressive dampening extends component lifespan significantly, particularly for gimbal systems, camera mounts, and electronic payload bays. The 500mm length provides adequate footprint stability for both level and uneven terrain landing scenarios, while the included pair allows for balanced weight distribution across the aircraft's center of gravity. The material composition resists UV degradation, moisture absorption, and temperature fluctuations common in agricultural and industrial field deployments.

Key Specifications

Specification	Details
Product Type	Landing Gear Bar Assembly with Shock-Absorbing Mat
Brand	EFT (Agricultural Drone Systems)
Compatibility	E410P, E610P Drone Platforms
Outer Diameter	φ20mm
Inner Diameter	φ18mm
Length	500mm per unit
Quantity	2 pieces (complete set)
Material	Aluminum alloy tubing with elastomer shock-absorbing mat
Shock Absorption Technology	Closed-cell foam with embedded elastomer compounds
Impact Force Reduction	Up to 60 percent
Operating Temperature Range	-10°C to +50°C
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp

Key Features

• Dual-unit configuration ensures balanced load distribution and enhanced stability during landing operations on uneven terrain
• Shock-absorbing mat technology reduces impact forces by up to 60 percent, protecting sensitive gimbal and payload systems from damage
• Precision φ20*φ18*500mm aluminum construction provides lightweight yet rigid structural support for E410P and E610P platforms
• Progressive elastomer dampening creates controlled deceleration curve, extending component lifespan and reducing wear on aircraft frame
• UV-resistant and moisture-sealed material composition ensures durability in harsh agricultural and industrial field environments
• Tool-free installation design allows rapid deployment and field replacement without specialized equipment or technical expertise

Applications and Use Cases

• Agricultural spray operations where landing on uneven crop fields requires shock absorption to protect chemical payload tanks and precision nozzle systems from impact damage
• Industrial inspection missions on rooftops and irregular surfaces where controlled landing prevents gimbal misalignment and camera lens damage
• Precision seeding and fertilizer distribution operations requiring repeated landings throughout the day without equipment degradation
• Emergency response and surveying applications in disaster zones with rough terrain, where reliable landing gear prevents mission-critical payload loss
• Research and environmental monitoring deployments requiring extended operational life of expensive sensor arrays and data collection equipment

How to Use

Begin installation by ensuring the E410P or E610P aircraft is powered down and placed on a stable work surface. Locate the landing gear attachment points on the undercarriage frame, typically marked with threaded inserts or quick-release mechanisms. Insert each landing gear bar unit into the designated mounting points, ensuring the shock-absorbing mat faces downward toward the ground contact surface. Verify that both bars are fully seated and secured according to the aircraft manufacturer's torque specifications, typically 8-12 Newton-meters for standard attachment hardware. Perform a visual inspection to confirm the mat surfaces are parallel and make equal contact with the ground when the aircraft is level.

Before operational deployment, conduct a static load test by gently pressing down on the aircraft frame to verify the shock-absorbing mats compress uniformly without binding or uneven resistance. Check that the landing gear bars maintain their alignment and do not twist or flex excessively under moderate pressure. After each operational session, inspect the mat surfaces for debris, moisture accumulation, or visible compression damage. Clean with a soft brush and allow to air dry completely before storage. Replace the complete landing gear assembly if the shock-absorbing mat exhibits permanent deformation, cracking, or reduced responsiveness to compression, as degraded dampening reduces impact protection effectiveness.

Frequently Asked Questions

What is the difference between φ20 and φ18 in the landing gear specifications?

The φ20 represents the outer diameter of the aluminum tubing that provides structural support, while φ18 indicates the inner diameter of the hollow tube. This dimensional relationship creates optimal wall thickness for strength-to-weight ratio. The hollow core design reduces overall mass while maintaining rigidity, which is critical for agricultural drones where payload capacity directly impacts operational efficiency. The specific dimensions are engineered to match the attachment mechanisms on E410P and E610P platforms precisely.

How often should I replace the shock-absorbing mat component?

The shock-absorbing mat typically maintains optimal performance for 200-300 landing cycles under normal field conditions. Factors affecting replacement frequency include landing surface hardness, aircraft weight with payload, and frequency of operations. If you notice the mat no longer compresses uniformly or feels harder than when new, it indicates elastomer degradation and replacement is recommended. Visual inspection for permanent indentation, cracking, or moisture absorption will guide replacement timing. We recommend inspecting after every 50 landings in intensive agricultural operations.

Can I use this landing gear on surfaces other than the E410P and E610P?

This landing gear bar assembly is specifically engineered for E410P and E610P attachment mechanisms and is not compatible with other drone platforms without custom adapter hardware. Attempting to install on incompatible aircraft may result in unstable landing characteristics, frame damage, or safety hazards during takeoff and landing operations. If you require landing gear for a different EFT platform, we recommend contacting our technical support team to identify the correct component for your specific aircraft model.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy EFT Landing Gear Bar φ20*φ18*500/Shock-Absorbing Mat/2pcs Compatible with E410P/E610P Online in India

Purchase the EFT Landing Gear Bar φ20*φ18*500/Shock-Absorbing Mat/2pcs Compatible with E410P/E610P online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on EFT Landing Gear Bar φ20*φ18*500/Shock-Absorbing Mat/2pcs Compatible with E410P/E610P with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.