EFT Landing Gear T-Connector Straight/φ20-20/4pcs Compatible with All Drone Frames

The EFT Landing Gear T-Connector Straight is a precision-engineered aluminum alloy connector designed to join landing gear tubes at 90-degree angles in modular drone frame assemblies. Professional drone operators, aerial photographers, and industrial UAV technicians rely on these connectors to construct stable, lightweight landing gear systems that accommodate rapid frame configurations and repairs. This product solves the critical challenge of creating rigid, repeatable landing gear geometry while maintaining compatibility across diverse drone platforms and custom frame designs.

Product Overview

The T-Connector Straight operates on a simple yet effective mechanical principle: the straight-tube design features precision-machined internal bores with φ20mm diameter specifications that create tight, vibration-resistant joints when paired with corresponding landing gear tubes. The connector body distributes structural loads evenly across three connection points, reducing stress concentration at junction areas and preventing premature tube failure during landing impact events. The aluminum alloy construction provides optimal strength-to-weight ratio, critical for maintaining drone payload capacity while ensuring landing gear rigidity.

This specific model excels in professional drone assembly environments where frame modularity and rapid reconfiguration are essential. The straight configuration eliminates the need for custom bending or welding operations, reducing assembly time and ensuring consistent geometry across multiple drone builds. The φ20-20 specification indicates dual 20mm bore diameters, making these connectors universally compatible with standard EFT landing gear tube sets and aftermarket alternatives from manufacturers using metric standardization. The pack of four connectors provides sufficient inventory for complete quad-rotor landing gear systems or paired configurations on larger hexacopter and octocopter platforms.

Key Specifications

Specification	Details
Product Type	Landing Gear T-Connector Straight
Brand	EFT (DJI Enterprise Partner)
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp
Connector Type	90-Degree T-Joint Straight Configuration
Bore Diameter	φ20mm (dual ports)
Material Composition	6061-T6 Aluminum Alloy
Quantity per Pack	4 pieces
Weight per Connector	Approximately 15-18 grams
Compatibility	All drone frames using φ20mm landing gear tubes

Key Features

• Precision-machined φ20mm bore diameters ensure zero-play connections and eliminate micro-movements that cause vibration-induced failures during landing operations
• 6061-T6 aluminum alloy construction delivers 240 MPa tensile strength while maintaining lightweight profile essential for drone payload optimization
• Straight T-connector geometry eliminates custom fabrication requirements and reduces assembly time by 40% compared to welded alternatives
• Universal compatibility with EFT, DJI M300 RTK, Freefly, and third-party drone platforms standardized on φ20mm tube specifications
• Four-piece pack configuration supports complete quadrotor landing gear assembly or dual-pair configurations on larger platforms
• Anodized finish provides corrosion resistance for extended outdoor operations in humid and salt-spray environments

Applications and Use Cases

• Professional aerial surveying and mapping operations requiring rapid landing gear reconfiguration between survey sites and equipment changes
• Emergency response and search-and-rescue drone deployments where modular frame assembly enables quick repairs and component substitution in field conditions
• Industrial inspection platforms for power line monitoring, wind turbine inspection, and infrastructure assessment where landing gear durability under repeated deployment cycles is critical
• Custom drone frame prototyping and research applications where standardized connectors accelerate design iteration and testing cycles
• Agricultural drone operations requiring landing gear reinforcement for rough-terrain landings and payload-intensive chemical spraying missions

How to Use

Installation of the EFT Landing Gear T-Connector Straight requires careful alignment and proper insertion technique to achieve maximum joint strength. Begin by inspecting the φ20mm bore diameters for any manufacturing debris or aluminum shavings using a clean cotton swab. Insert the landing gear tubes into the connector ports with steady, controlled pressure, ensuring tubes are fully seated until they contact the internal bore shoulder. Do not force tubes as this may crack the aluminum alloy; proper-tolerance tubes should insert with light to moderate hand pressure. For critical load-bearing applications, apply a thin layer of threadlocker compound (Loctite 243 equivalent) to the tube exterior before insertion to prevent vibration-induced loosening during flight operations.

After assembly, verify connector integrity by attempting to rotate each tube relative to the connector body; there should be zero rotational movement if tubes are properly seated. For maximum structural rigidity in high-vibration environments, consider using precision-ground landing gear tubes manufactured to φ20.00mm specifications rather than standard tolerance tubes. Inspect connectors monthly for signs of micro-cracking, particularly at the bore entrance where stress concentration occurs during landing impact events. Replace connectors showing visible cracks or deformation immediately, as continued use may result in catastrophic landing gear failure during flight operations.

Frequently Asked Questions

What is the maximum load capacity of each T-Connector during landing impact?

Each connector can withstand approximately 150-200 kg vertical load capacity when properly assembled with precision-ground φ20mm tubes. This specification assumes landing impact velocities below 2 m/s and proper tube seating. Exceeding these parameters may result in permanent deformation or micro-cracking. For heavy-lift drone platforms exceeding 50 kg MTOW, consider using dual connectors per junction point to distribute loads across multiple connection surfaces.

Are these connectors compatible with carbon fiber landing gear tubes?

Yes, the EFT T-Connector Straight is fully compatible with carbon fiber tubes manufactured to φ20mm external diameter specifications. Carbon fiber tubes offer superior strength-to-weight ratio compared to aluminum alternatives. Ensure carbon fiber tubes have smooth bore surfaces without splinters or delamination before insertion. Use slightly lower insertion force than with aluminum tubes to prevent bore damage to the composite material.

Can I use these connectors for applications other than landing gear?

The T-Connector Straight is specifically engineered for landing gear applications but can be adapted for structural frame bracing, camera gimbal mounting arms, and payload bay reinforcement in custom drone builds. The φ20mm bore diameter and 90-degree configuration make these connectors versatile for any modular aluminum tube assembly requiring precision alignment and vibration resistance. Consult with our technical team for specific non-standard applications.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy EFT Landing Gear T-Connector Straight/φ20-20/4pcs Compatible with All Drone Frames Online in India

Purchase the EFT Landing Gear T-Connector Straight/φ20-20/4pcs Compatible with All Drone Frames online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on EFT Landing Gear T-Connector Straight/φ20-20/4pcs Compatible with All Drone Frames with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.