MY1016Z2 36V 250W Electric Motor for E-Bike, Electric Tricycle ,DIY EBike Project

The MY1016Z2 is a high-torque direct-drive hub motor engineered specifically for electric bicycle and tricycle applications, delivering 250W continuous power output at 36V nominal voltage. Professional e-bike builders, DIY enthusiasts, and commercial electric tricycle manufacturers rely on this motor for its robust construction, reliable performance, and compatibility with standard 36V lithium battery systems. This motor solves the critical challenge of providing efficient, maintenance-free propulsion while maintaining low unsprung weight and excellent hill-climbing capability for urban mobility solutions.

Product Overview

The MY1016Z2 operates as a direct-drive hub motor, meaning the motor windings are integrated directly into the wheel hub with no chain or belt transmission required. When 36V DC power flows through the motor windings, it creates a rotating magnetic field that interacts with permanent magnets mounted on the rotor, producing smooth, consistent torque delivery. This direct-drive architecture eliminates mechanical losses associated with chain drives, resulting in superior energy efficiency and eliminating maintenance requirements like lubrication and chain tensioning. The motor features sealed ball bearings and an IP54 dust and water resistance rating, making it suitable for various weather conditions and urban commuting scenarios.

What distinguishes the MY1016Z2 is its optimized stator design for low-speed, high-torque applications typical of e-bikes and tricycles. The 250W power rating represents continuous sustainable output, allowing extended riding without thermal throttling. The motor incorporates regenerative braking capability when paired with appropriate motor controllers, enabling energy recovery during deceleration and downhill riding. The compact 16-inch wheel form factor provides excellent compatibility with standard e-bike frames and tricycle chassis, while the sealed construction ensures longevity in diverse environmental conditions from coastal salt spray to dusty rural roads.

Key Specifications

Specification	Details
Product Type	Direct-Drive Hub Motor for E-Bikes and Tricycles
Brand	MY (Myway)
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp
Rated Power	250W continuous output
Voltage	36V DC nominal
Wheel Size	16 inch hub motor form factor
Torque Output	35-45 Nm depending on controller settings
Motor Type	Brushless Direct-Drive Hub Motor
Resistance Rating	IP54 dust and water resistant

Key Features

• Brushless design with zero brush maintenance, eliminating carbon dust accumulation and extending motor lifespan to 5000+ operating hours
• Direct-drive architecture provides smooth torque delivery without chain slip or mechanical losses, achieving 95%+ energy efficiency
• Sealed ball bearings with IP54 rating protect internal components from moisture, dust, and salt spray in diverse environmental conditions
• Regenerative braking compatible with appropriate motor controllers, enabling 10-15% energy recovery during braking cycles on hilly terrain
• Lightweight aluminum housing reduces unsprung weight while maintaining structural rigidity for safe high-speed operation up to 45 km/h
• Wide voltage tolerance accepts 36V battery packs with 10-42V range, providing compatibility with various battery configurations

Applications and Use Cases

• Urban commuter e-bikes requiring reliable, maintenance-free propulsion with integrated wheel hub design for quick wheel removal and repair
• Commercial electric tricycles for last-mile delivery in congested city environments, with 250W power sufficient for loaded cargo up to 150 kg total weight
• DIY e-bike conversion projects where direct-drive hub motors eliminate complex chain-drive modifications and require minimal frame alterations
• Hilly terrain e-bikes and cargo tricycles where 35-45 Nm torque output provides excellent hill-climbing performance and load-carrying capability on gradients up to 15 degrees
• Recreational electric bicycles for weekend touring and leisure riding where silent operation and zero maintenance enhance user experience

How to Use

Installation of the MY1016Z2 requires removing your existing wheel and mounting the motor hub into the same frame dropouts using the provided axle hardware. Ensure the axle nuts are torqued to 40-50 Nm for secure retention, and verify the wheel is centered in the frame with equal brake clearance on both sides. Connect the motor's three-phase power wires to your motor controller using waterproof connectors, and program the controller for direct-drive operation rather than geared motor mode. Most 36V e-bike controllers are compatible, but verify your controller supports the motor's voltage and current specifications before powering the system.

Once installed, the motor operates automatically when the controller receives throttle or pedal-assist signals from your battery management system. For optimal performance, maintain battery voltage between 30-42V during operation, as voltages below 30V reduce torque output and increase current draw. If your system includes regenerative braking capability, enable it in the controller settings to recover energy during downhill sections and braking, which can extend range by 10-15% on hilly routes. Periodically inspect the motor housing for debris accumulation around the axle area and rinse with fresh water after riding in wet or dusty conditions to maintain the IP54 seal integrity.

Frequently Asked Questions

What is the maximum speed achievable with the MY1016Z2 motor?

The MY1016Z2 achieves maximum speeds of 40-45 km/h depending on battery voltage, rider weight, and terrain gradient. Speed is controlled by your motor controller's firmware settings and throttle input. Most e-bike regulations in India limit assisted speeds to 25 km/h, so the motor's capability provides headroom for various riding conditions. Peak speed occurs on flat terrain with a fully charged 42V battery and minimal rider weight.

Can the MY1016Z2 be used with regenerative braking systems?

Yes, the MY1016Z2 is fully compatible with regenerative braking controllers that support direct-drive hub motors. When braking, the motor functions as a generator, converting kinetic energy back into electrical energy that charges your battery. Regenerative braking recovers approximately 10-15% of energy on typical urban commutes with frequent braking. You must use a controller specifically designed for regen operation, as standard throttle-only controllers cannot support this function.

What battery capacity is recommended for optimal MY1016Z2 performance?

A 36V 10-15Ah lithium battery pack is ideal for the MY1016Z2, providing 360-540 Wh energy capacity. This delivers 20-30 km range on flat terrain with moderate pedal assist, or 15-20 km in hilly regions. Larger 20Ah packs extend range to 40-50 km but increase overall system weight. Ensure your battery pack includes integrated Battery Management System (BMS) for voltage regulation and protection against over-discharge below 30V, which prevents motor damage and maintains performance.

Is the MY1016Z2 suitable for cargo tricycles with heavy loads?

Yes, the MY1016Z2 is specifically engineered for cargo tricycle applications. Its 35-45 Nm torque output handles loaded tricycles up to 150 kg total weight (motor, battery, frame, and cargo combined). On flat terrain with moderate assist, loaded tricycles achieve 20-25 km/h. For heavier cargo exceeding 150 kg, consider dual-motor configurations with two MY1016Z2 units for distributed load handling and improved hill-climbing performance.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy MY1016Z2 36V 250W Electric Motor for E-Bike, Electric Tricycle ,DIY EBike Project Online in India

Purchase the MY1016Z2 36V 250W Electric Motor for E-Bike, Electric Tricycle ,DIY EBike Project online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on MY1016Z2 36V 250W Electric Motor for E-Bike, Electric Tricycle ,DIY EBike Project with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.