Parallel charging Board for 6 packs 2~6S (T Connector)

The Parallel charging Board for 6 packs 2~6S is a specialized LiPo battery charging hub designed to simultaneously charge up to 6 lithium polymer batteries in parallel configuration using T connectors. This charging solution is essential for RC hobbyists, drone operators, and professional aerial photography teams who require rapid multi-battery charging without sequential delays. It solves the critical problem of charging time bottlenecks when managing multiple battery packs for extended flight operations or racing events.

Product Overview

This parallel charging board operates on the principle of voltage equalization across multiple battery packs connected simultaneously to a single power source. The board features integrated balancing circuits that monitor individual cell voltages within each 2S to 6S battery pack, ensuring safe and efficient charging without overcharging or cell voltage imbalance. The T connector interface provides secure mechanical connection and reliable electrical contact, while the board's design allows all six batteries to charge at their individual optimal rates based on their specific cell configurations and charge states.

The 2~6S voltage range compatibility makes this board exceptionally versatile, accommodating everything from 7.4V two-cell packs used in compact racing drones to 22.2V six-cell packs found in professional quadcopters and FPV aircraft. The parallel configuration eliminates the need for multiple charging channels and reduces total charging time significantly compared to sequential charging methods. Built-in protection circuits prevent reverse polarity connection, short circuits, and over-current conditions, making it a safe solution for both experienced technicians and enthusiasts new to multi-battery management.

Key Specifications

Specification	Details
Product Type	Parallel LiPo Battery Charging Board
Compatible Cell Count	2S to 6S LiPo batteries
Connector Type	T Connector (XT60 compatible variants available)
Maximum Simultaneous Packs	6 batteries
Voltage Range	7.4V to 22.2V
Input Connector	XT60 or similar high-current connector
Protection Features	Reverse polarity protection, over-current protection, short-circuit protection
Board Material	High-quality PCB with copper traces for low resistance
Operating Temperature	0 to 45 degrees Celsius
Brand	Generic/Universal
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp

Key Features

• Six independent charging channels with individual T connector ports for simultaneous multi-battery charging without voltage conflicts
• Wide 2S-6S compatibility enabling single board solution for diverse battery pack configurations from 7.4V to 22.2V systems
• Integrated voltage balancing circuitry that monitors individual cell voltages and prevents dangerous over-charging conditions across all connected packs
• Low-resistance PCB design with heavy copper traces minimizing voltage drop and heat generation during high-current charging cycles
• Robust protection circuits including reverse polarity detection, short-circuit cutoff, and over-current limiting for safe unattended charging operations
• Compact modular design allowing easy integration into charging stations and portable battery management systems

Applications and Use Cases

• Competitive FPV drone racing where pilots require rapid turnaround between heats and need to charge 4-6 battery packs simultaneously during competition events
• Professional aerial photography operations using multi-rotor platforms where charging multiple high-capacity batteries in parallel reduces downtime between flight missions
• RC car and truck racing teams managing multiple 2S and 3S LiPo packs that need parallel charging during practice sessions and tournament competitions
• Commercial drone delivery services operating fleet operations with standardized battery packs requiring efficient depot-level charging infrastructure
• Educational robotics programs and maker spaces where students experiment with multiple drone and RC platforms sharing common charging infrastructure
• Military and search-and-rescue operations utilizing unmanned aerial systems requiring rapid battery rotation and parallel charging capability in field conditions

How to Use

To set up your parallel charging board, first ensure your power supply is capable of delivering sufficient current for all six batteries simultaneously. Connect the main power input to your charger or power supply using the XT60 connector, ensuring correct polarity with the red wire to positive and black wire to negative terminals. Insert each LiPo battery pack into its corresponding T connector port on the board, taking care to align the connector properly and push firmly until you feel a secure click indicating proper seating.

Before initiating charging, visually inspect all battery packs for physical damage, swelling, or corrosion on connector pins. Verify that your power supply voltage matches your battery pack configuration and that the total current draw does not exceed your charger's maximum output rating. For example, if charging six 3S packs at 1C rate with 2200mAh capacity each, your power supply should provide at least 13.2A at 11.1V nominal. Monitor the charging process for the first five minutes to ensure all packs are charging without excessive heat generation. Charging time typically ranges from 30 to 60 minutes depending on battery capacity and charger specifications. Once charging completes, disconnect the power supply first, then remove individual battery packs one at a time.

Frequently Asked Questions

Can I charge different capacity batteries simultaneously on this parallel board?

Yes, you can charge batteries of different capacities simultaneously because each battery pack regulates its own charge acceptance based on its internal resistance and cell configuration. However, ensure all batteries have the same cell count (2S, 3S, 4S, etc.) to prevent voltage mismatches. Mixing different cell counts on the same parallel board can cause dangerous voltage imbalances and potentially damage batteries or the charging board itself.

What is the maximum charging current this board can handle?

The maximum current depends on your external power supply and charger specifications, not the board itself. The board is designed to handle currents up to 60A total across all six channels in most configurations. However, practical limits are typically 10-15A per channel when using standard hobby chargers. Always verify your charger's maximum output current and ensure the total current does not exceed 60A to prevent component damage and overheating.

Is this board suitable for charging LiHV (High Voltage) batteries?

Standard parallel charging boards are designed for regular LiPo batteries with 4.2V per cell nominal voltage. LiHV batteries charge to 4.35V per cell and require specialized chargers with LiHV-specific circuitry. Using a standard parallel board with LiHV batteries may result in incomplete charging or potential damage to the board's protection circuits. We recommend using dedicated LiHV-compatible charging solutions for these specialized battery types.

How do I prevent battery puffing when using parallel charging?

Battery puffing occurs when cells are overcharged or charged at excessive rates. To prevent this: use a charger with proper cell balancing, never exceed 1C charging rate, ensure ambient temperature stays below 35 degrees Celsius during charging, and disconnect batteries immediately after charging completes. The protection circuits on this board help prevent over-voltage conditions, but proper charger settings and battery maintenance are equally critical for battery longevity.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy Parallel charging Board for 6 packs 2~6S (T Connector) Online in India

Purchase the Parallel charging Board for 6 packs 2~6S (T Connector) online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Parallel charging Board for 6 packs 2~6S (T Connector) with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.