22 % ବନ୍ଦ |
ESC Power Distribution Board Soldered XT60
The ESC Power Distribution Board Soldered XT60 is a pre-soldered power distribution module designed to simplify multi-motor drone and quadcopter builds by eliminating the need for individual ESC power connections. Professional drone builders, FPV racing enthusiasts, and commercial UAV operators rely on this component to reduce wiring complexity and improve electrical reliability in high-current applications. This board solves the critical problem of voltage drop and power loss across multiple ESC connections by providing a centralized distribution point with low-resistance copper pathways and XT60 connectors rated for continuous high-current delivery.
Product Overview
The ESC Power Distribution Board functions as a central hub that accepts a single high-capacity battery input via XT60 connector and distributes power simultaneously to multiple Electronic Speed Controllers without requiring individual parallel soldering. The board utilizes heavy-gauge copper PCB traces and pre-soldered XT60 connectors to minimize voltage drop across the power distribution network. This design principle is critical in drone applications where voltage sag directly impacts motor performance, flight stability, and overall system efficiency. The soldered construction eliminates cold solder joint failures that commonly occur in field-assembled distribution boards, ensuring consistent electrical contact even under vibration and thermal cycling conditions typical in aerial platforms.
This specific model stands out through its integrated design that accommodates standard 4-in-1 ESC stacks and traditional individual ESC configurations. The board features multiple output ports allowing simultaneous power distribution to up to four ESCs while maintaining balanced current distribution. The XT60 connector specification ensures compatibility with most modern LiPo battery packs rated between 3S and 6S configurations. The pre-soldered construction significantly reduces assembly time compared to traditional point-to-point soldering methods, while the rigid PCB substrate provides mechanical stability and thermal dissipation properties that protect against voltage regulation issues during high-thrust maneuvers.
Key Specifications
| Specification | Details |
| Product Type | ESC Power Distribution Board with Pre-soldered XT60 Connectors |
| Connector Type | XT60 Male Input, XT60 Female Outputs |
| Maximum Continuous Current | 60A per output channel |
| Voltage Range | 3S to 6S LiPo (11.1V to 22.2V nominal) |
| PCB Material | Heavy-gauge copper with FR-4 substrate |
| Number of Output Ports | 4 independent XT60 female connectors |
| Dimensions | 45mm x 35mm x 8mm |
| Weight | 12 grams |
| Operating Temperature Range | -20°C to 60°C |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- Pre-soldered XT60 connectors eliminate field assembly errors and reduce build time by 60 percent compared to manual soldering methods
- Heavy-gauge copper PCB traces rated for 60A continuous current per channel with minimal voltage drop below 0.2V at maximum load
- Simultaneous 4-channel power distribution enables parallel ESC operation without individual battery connector modifications
- Compact 45x35mm form factor fits standard drone frames and allows integration with 4-in-1 ESC stacks without frame modifications
- Rigid PCB substrate provides mechanical stability and thermal dissipation during high-current transient events
- Compatible with 3S to 6S LiPo battery packs covering voltage range from 11.1V to 22.2V nominal
Applications and Use Cases
- FPV Racing Drones: Enables rapid ESC integration in competitive racing platforms where build time and electrical reliability directly impact flight performance and race outcomes
- Commercial UAV Photography: Provides stable power distribution for multi-rotor platforms carrying gimbal-mounted cameras requiring consistent voltage delivery across extended flight operations
- DIY Quadcopter Projects: Simplifies wiring complexity for hobbyist builders transitioning from simple 2-motor designs to 4-motor configurations without soldering expertise
- High-Performance Multirotor Platforms: Supports heavy-lift applications with 4S-6S battery configurations requiring 200A+ aggregate current distribution across multiple ESCs
- Educational Robotics Programs: Facilitates rapid prototyping of autonomous aerial platforms in academic settings where standardized components reduce assembly variability
- Aerial Mapping and Surveying: Ensures reliable power delivery for extended mission flights where voltage stability directly impacts sensor accuracy and flight duration
How to Use
Installation begins with identifying the main battery connector input on the distribution board, which features a male XT60 connector. Connect your LiPo battery pack XT60 female connector to this input port, ensuring proper polarity alignment with red positive and black negative terminals. The board will immediately provide power to all four output ports simultaneously. Connect each ESC to a separate XT60 female output port using appropriate gauge wire connectors, ensuring all connections are fully seated and locked into position. Verify that all output connectors are firmly engaged by gently tugging on each connection point before powering up your flight controller.
Before first flight, measure voltage across each output port using a digital multimeter to confirm balanced power distribution. Acceptable voltage variance between output channels should not exceed 0.3V under no-load conditions. During initial ground testing, monitor each ESC for proper throttle response and motor spin direction confirmation. If voltage drop exceeds 0.5V between battery input and any output port during motor operation, inspect all connector contacts for oxidation or poor seating and reseat connections as necessary. The distribution board requires no calibration or configuration and operates passively as a power routing component, making it compatible with any flight controller and ESC combination supporting XT60 connectors.
Frequently Asked Questions
Can this distribution board handle 6S LiPo batteries with high discharge rates?
Yes, the ESC Power Distribution Board is rated for continuous operation with 6S LiPo batteries delivering up to 22.2V nominal voltage. The heavy-gauge copper PCB traces and XT60 connectors are certified for 60A continuous current per output channel. For applications exceeding 60A per ESC, verify that your ESCs and motors are also rated for these current levels. The board itself will not limit performance but serves as a passive distribution component, so total system current capacity depends on your battery discharge rating and motor specifications.
What is the voltage drop across the distribution board at maximum current?
The voltage drop across the pre-soldered copper pathways is typically below 0.2V when operating at 60A continuous current per channel. This minimal drop is achieved through heavy-gauge copper traces and low-resistance XT60 connector design. For comparison, traditional point-to-point soldered distribution boards often exhibit 0.5V to 1.0V drop due to wire gauge limitations and solder joint resistance. This voltage stability is critical for maintaining consistent motor performance and flight stability during high-thrust maneuvers.
Is this board compatible with 4-in-1 ESC stacks?
Yes, the ESC Power Distribution Board is specifically designed to work with 4-in-1 ESC stacks. The four XT60 output connectors provide independent power feeds suitable for both traditional individual ESCs and integrated 4-in-1 configurations. If using a 4-in-1 ESC, you can connect the main battery to the distribution board input and the 4-in-1 unit to any single output port, or distribute power across multiple outputs for redundancy. Verify that your 4-in-1 ESC accepts XT60 connectors and supports the voltage range of your battery configuration.
Can I use this board with brushed DC motors instead of brushless motors?
The distribution board functions as a passive power distribution component and is compatible with any motor type, including brushed DC motors, brushless outrunner motors, and gimbal servos. However, brushed DC motors require direct voltage application without ESC speed control, so you would need to modify your wiring to bypass the ESC entirely. For standard drone applications with brushless motors, the board is designed to work exclusively with ESC-controlled motor systems. Consult your motor and ESC documentation to confirm compatibility with your specific application.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India. Express shipping options may be available for urgent requirements. Track your order status in real-time through your account dashboard after dispatch confirmation.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage, improper soldering attempts, or connector modifications. Warranty covers pre-soldered connector integrity and PCB trace continuity under normal operating conditions.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote. We offer tiered pricing for educational institutions, commercial drone operators, and robotics program coordinators.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication certificates and quality verification
- Expert Team: Our technical team validates every product before listing and provides application-specific guidance
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse with real-time tracking
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat
- Payment Options: COD, UPI, credit/debit cards, net banking, and EMI available for qualified orders
- Technical Support: 24/7 expert guidance via email and WhatsApp from experienced drone and robotics specialists
- Returns: 7-day return policy on manufacturing defects with hassle-free replacement process
- Educational Discounts: Special pricing for schools, colleges, and robotics clubs with institutional verification
Buy ESC Power Distribution Board Soldered XT60 Online in India
Purchase the ESC Power Distribution Board Soldered XT60 online at The Engineer Store, India's trusted source for genuine drone electronics and robotics components. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat with fast shipping and competitive pricing. Get the best price on ESC Power Distribution
ESC Power Distribution Board Soldered XT60
The ESC Power Distribution Board Soldered XT60 is a pre-soldered power distribution module designed to simplify multi-motor drone and quadcopter builds by eliminating the need for individual ESC power connections. Professional drone builders, FPV racing enthusiasts, and commercial UAV operators rely on this component to reduce wiring complexity and improve electrical reliability in high-current applications. This board solves the critical problem of voltage drop and power loss across multiple ESC connections by providing a centralized distribution point with low-resistance copper pathways and XT60 connectors rated for continuous high-current delivery.
Product Overview
The ESC Power Distribution Board functions as a central hub that accepts a single high-capacity battery input via XT60 connector and distributes power simultaneously to multiple Electronic Speed Controllers without requiring individual parallel soldering. The board utilizes heavy-gauge copper PCB traces and pre-soldered XT60 connectors to minimize voltage drop across the power distribution network. This design principle is critical in drone applications where voltage sag directly impacts motor performance, flight stability, and overall system efficiency. The soldered construction eliminates cold solder joint failures that commonly occur in field-assembled distribution boards, ensuring consistent electrical contact even under vibration and thermal cycling conditions typical in aerial platforms.
This specific model stands out through its integrated design that accommodates standard 4-in-1 ESC stacks and traditional individual ESC configurations. The board features multiple output ports allowing simultaneous power distribution to up to four ESCs while maintaining balanced current distribution. The XT60 connector specification ensures compatibility with most modern LiPo battery packs rated between 3S and 6S configurations. The pre-soldered construction significantly reduces assembly time compared to traditional point-to-point soldering methods, while the rigid PCB substrate provides mechanical stability and thermal dissipation properties that protect against voltage regulation issues during high-thrust maneuvers.
Key Specifications
| Specification | Details |
| Product Type | ESC Power Distribution Board with Pre-soldered XT60 Connectors |
| Connector Type | XT60 Male Input, XT60 Female Outputs |
| Maximum Continuous Current | 60A per output channel |
| Voltage Range | 3S to 6S LiPo (11.1V to 22.2V nominal) |
| PCB Material | Heavy-gauge copper with FR-4 substrate |
| Number of Output Ports | 4 independent XT60 female connectors |
| Dimensions | 45mm x 35mm x 8mm |
| Weight | 12 grams |
| Operating Temperature Range | -20°C to 60°C |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- Pre-soldered XT60 connectors eliminate field assembly errors and reduce build time by 60 percent compared to manual soldering methods
- Heavy-gauge copper PCB traces rated for 60A continuous current per channel with minimal voltage drop below 0.2V at maximum load
- Simultaneous 4-channel power distribution enables parallel ESC operation without individual battery connector modifications
- Compact 45x35mm form factor fits standard drone frames and allows integration with 4-in-1 ESC stacks without frame modifications
- Rigid PCB substrate provides mechanical stability and thermal dissipation during high-current transient events
- Compatible with 3S to 6S LiPo battery packs covering voltage range from 11.1V to 22.2V nominal
Applications and Use Cases
- FPV Racing Drones: Enables rapid ESC integration in competitive racing platforms where build time and electrical reliability directly impact flight performance and race outcomes
- Commercial UAV Photography: Provides stable power distribution for multi-rotor platforms carrying gimbal-mounted cameras requiring consistent voltage delivery across extended flight operations
- DIY Quadcopter Projects: Simplifies wiring complexity for hobbyist builders transitioning from simple 2-motor designs to 4-motor configurations without soldering expertise
- High-Performance Multirotor Platforms: Supports heavy-lift applications with 4S-6S battery configurations requiring 200A+ aggregate current distribution across multiple ESCs
- Educational Robotics Programs: Facilitates rapid prototyping of autonomous aerial platforms in academic settings where standardized components reduce assembly variability
- Aerial Mapping and Surveying: Ensures reliable power delivery for extended mission flights where voltage stability directly impacts sensor accuracy and flight duration
How to Use
Installation begins with identifying the main battery connector input on the distribution board, which features a male XT60 connector. Connect your LiPo battery pack XT60 female connector to this input port, ensuring proper polarity alignment with red positive and black negative terminals. The board will immediately provide power to all four output ports simultaneously. Connect each ESC to a separate XT60 female output port using appropriate gauge wire connectors, ensuring all connections are fully seated and locked into position. Verify that all output connectors are firmly engaged by gently tugging on each connection point before powering up your flight controller.
Before first flight, measure voltage across each output port using a digital multimeter to confirm balanced power distribution. Acceptable voltage variance between output channels should not exceed 0.3V under no-load conditions. During initial ground testing, monitor each ESC for proper throttle response and motor spin direction confirmation. If voltage drop exceeds 0.5V between battery input and any output port during motor operation, inspect all connector contacts for oxidation or poor seating and reseat connections as necessary. The distribution board requires no calibration or configuration and operates passively as a power routing component, making it compatible with any flight controller and ESC combination supporting XT60 connectors.
Frequently Asked Questions
Can this distribution board handle 6S LiPo batteries with high discharge rates?
Yes, the ESC Power Distribution Board is rated for continuous operation with 6S LiPo batteries delivering up to 22.2V nominal voltage. The heavy-gauge copper PCB traces and XT60 connectors are certified for 60A continuous current per output channel. For applications exceeding 60A per ESC, verify that your ESCs and motors are also rated for these current levels. The board itself will not limit performance but serves as a passive distribution component, so total system current capacity depends on your battery discharge rating and motor specifications.
What is the voltage drop across the distribution board at maximum current?
The voltage drop across the pre-soldered copper pathways is typically below 0.2V when operating at 60A continuous current per channel. This minimal drop is achieved through heavy-gauge copper traces and low-resistance XT60 connector design. For comparison, traditional point-to-point soldered distribution boards often exhibit 0.5V to 1.0V drop due to wire gauge limitations and solder joint resistance. This voltage stability is critical for maintaining consistent motor performance and flight stability during high-thrust maneuvers.
Is this board compatible with 4-in-1 ESC stacks?
Yes, the ESC Power Distribution Board is specifically designed to work with 4-in-1 ESC stacks. The four XT60 output connectors provide independent power feeds suitable for both traditional individual ESCs and integrated 4-in-1 configurations. If using a 4-in-1 ESC, you can connect the main battery to the distribution board input and the 4-in-1 unit to any single output port, or distribute power across multiple outputs for redundancy. Verify that your 4-in-1 ESC accepts XT60 connectors and supports the voltage range of your battery configuration.
Can I use this board with brushed DC motors instead of brushless motors?
The distribution board functions as a passive power distribution component and is compatible with any motor type, including brushed DC motors, brushless outrunner motors, and gimbal servos. However, brushed DC motors require direct voltage application without ESC speed control, so you would need to modify your wiring to bypass the ESC entirely. For standard drone applications with brushless motors, the board is designed to work exclusively with ESC-controlled motor systems. Consult your motor and ESC documentation to confirm compatibility with your specific application.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India. Express shipping options may be available for urgent requirements. Track your order status in real-time through your account dashboard after dispatch confirmation.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage, improper soldering attempts, or connector modifications. Warranty covers pre-soldered connector integrity and PCB trace continuity under normal operating conditions.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote. We offer tiered pricing for educational institutions, commercial drone operators, and robotics program coordinators.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication certificates and quality verification
- Expert Team: Our technical team validates every product before listing and provides application-specific guidance
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse with real-time tracking
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat
- Payment Options: COD, UPI, credit/debit cards, net banking, and EMI available for qualified orders
- Technical Support: 24/7 expert guidance via email and WhatsApp from experienced drone and robotics specialists
- Returns: 7-day return policy on manufacturing defects with hassle-free replacement process
- Educational Discounts: Special pricing for schools, colleges, and robotics clubs with institutional verification
Buy ESC Power Distribution Board Soldered XT60 Online in India
Purchase the ESC Power Distribution Board Soldered XT60 online at The Engineer Store, India's trusted source for genuine drone electronics and robotics components. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat with fast shipping and competitive pricing. Get the best price on ESC Power Distribution