T Motor Antigravity MN5008 KV170

The T Motor Antigravity MN5008 KV170 is a high-performance brushless outrunner motor specifically engineered for multirotor drone platforms requiring sustained lift and precision control. Professional aerial photographers, FPV racing enthusiasts, and commercial drone operators rely on this motor for its exceptional power-to-weight ratio and thermal stability during extended flight operations. This motor solves the critical challenge of achieving stable hovering efficiency while maintaining rapid throttle response in medium to heavy-lift configurations.

Product Overview

The T Motor Antigravity MN5008 KV170 operates on three-phase brushless DC principles, utilizing a stator-rotor electromagnetic induction system that delivers consistent torque across its operational RPM range. The KV170 rating indicates 170 revolutions per minute per applied volt, making it ideal for larger propeller diameters that require lower rotational speeds but higher torque output. This motor features a precision-machined aluminum bell housing with optimized cooling fins that dissipate heat efficiently during continuous operation, preventing thermal throttling and maintaining performance consistency during extended flights or heavy payload scenarios.

What distinguishes the MN5008 in the Antigravity series is its advanced rotor design with reinforced magnetic poles and precision-balanced construction that minimizes vibration and cogging torque. The motor incorporates high-temperature epoxy windings rated for sustained operation up to 80 degrees Celsius, ensuring reliability in demanding aerial applications. The sealed bearing system provides protection against moisture and dust ingress, critical for outdoor drone operations in varied environmental conditions. The integrated sensorless electronic commutation works seamlessly with standard ESCs, requiring no additional sensor wiring or calibration complexity.

Key Specifications

Specification	Details
Product Type	Brushless Outrunner Motor
Brand	T Motor (DJI Approved)
Model	Antigravity MN5008
KV Rating	170 RPM/Volt
Stator Size	50mm diameter
Nominal Voltage	11.1V to 25.2V (3S to 6S LiPo)
Maximum Continuous Current	35A
Maximum Burst Current	45A (10 seconds)
Maximum Thrust	2500g with 15-inch propeller
Idle Current	0.8A at 12V
Weight	180g
Shaft Diameter	8mm
Connector Type	3.5mm Gold Bullet Connectors
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp

Key Features

• Precision-balanced rotor design with minimal vibration and cogging torque for smooth, responsive flight characteristics
• Advanced cooling fin geometry on aluminum bell housing for efficient thermal dissipation during sustained high-current operations
• High-temperature epoxy windings rated to 80 degrees Celsius ensuring reliability in demanding aerial photography and commercial applications
• Sensorless electronic commutation compatible with all standard ESCs, eliminating need for sensor wiring or complex calibration procedures
• Sealed bearing system with moisture and dust protection for outdoor operations in varied environmental conditions
• 3.5mm gold-plated bullet connectors ensuring low-resistance electrical connections and reliable power transfer
• Optimized magnetic pole design for consistent torque delivery across the entire RPM operational range
• DJI-approved quality standards with rigorous QA testing for professional-grade reliability

Applications and Use Cases

• Professional aerial photography and cinematography platforms using medium-lift quadcopters or hexacopters with 3-4kg payload capacity
• FPV racing drone configurations where sustained acceleration and rapid throttle response are critical for competitive performance
• Commercial inspection drones for infrastructure assessment, thermal imaging, and industrial surveying requiring extended flight endurance
• Agricultural drone systems for crop monitoring and precision spraying applications demanding stable hover characteristics with heavy sensor payloads
• Search and rescue operations utilizing medium-lift multirotor platforms for extended operational ranges and reliable thrust consistency
• Custom drone development and research applications requiring proven, reliable motor performance with extensive community documentation

How to Use

Installation of the T Motor Antigravity MN5008 KV170 requires secure mechanical mounting to your drone frame using the three M3 mounting holes positioned 120 degrees apart on the motor base. Ensure the mounting surface is perfectly perpendicular to the rotor plane to prevent lateral vibration and thrust vector deviation. Connect the three motor phase wires to your ESC using the 3.5mm bullet connectors, maintaining consistent wire gauges (typically 12-14 AWG for 35A continuous operation) and ensuring all connections are soldered with high-quality lead-free solder for optimal electrical conductivity.

Before initial operation, perform a static thrust test on a test stand to verify motor rotation direction and ESC calibration. Configure your ESC for sensorless brushless operation, typically requiring a simple throttle range calibration procedure outlined in your specific ESC manual. Mount your propeller securely with the correct rotation direction as specified for your multirotor configuration, then perform a bench spin test at low throttle to confirm smooth operation without vibration or unusual noise. During flight operations, monitor ESC temperature and motor temperature using telemetry if available, maintaining continuous current below the 35A maximum rating for optimal motor lifespan and thermal stability.

Frequently Asked Questions

What propeller sizes are compatible with the MN5008 KV170?

The MN5008 KV170 is optimized for propeller diameters ranging from 12 to 15 inches, depending on your specific frame weight and desired thrust characteristics. For maximum efficiency on quadcopters, 14-inch propellers are recommended, delivering approximately 2200-2500g static thrust. Larger propellers reduce RPM and increase torque, ideal for heavy-lift configurations, while smaller propellers increase RPM and reduce efficiency. Always verify your ESC can handle the resulting current draw for your chosen propeller size.

Is the MN5008 KV170 suitable for 4S LiPo batteries?

Yes, the MN5008 KV170 operates efficiently on 4S LiPo batteries (14.8V nominal). At this voltage, the motor will produce approximately 2500 RPM at full throttle with a 14-inch propeller, delivering excellent hover efficiency and responsive control. However, ensure your ESC is rated for at least 40A continuous current to handle the resulting power draw. For extended flight times, 4S configurations are often preferred as they balance voltage, current draw, and thermal management effectively.

What is the difference between KV170 and higher KV ratings like KV340?

The KV rating directly affects motor RPM at a given voltage. KV170 produces 170 RPM per volt, suitable for larger propellers requiring lower speeds and higher torque. Higher KV ratings like KV340 produce double the RPM, requiring smaller propellers but delivering faster acceleration. For medium-lift drones with 3-4kg payloads, KV170 is superior due to better efficiency and lower current draw. Choose KV based on your propeller size and thrust requirements, not just raw power.

Can I use the MN5008 KV170 on 6S LiPo batteries?

Yes, the MN5008 KV170 is rated for 6S LiPo operation (22.2V nominal), but this significantly increases RPM and current draw. At 6S with a 14-inch propeller, expect approximately 3750 RPM and substantially higher current consumption, potentially exceeding the 35A continuous rating. For 6S operation, consider using a smaller propeller (10-12 inches) to maintain safe current levels. Always verify your ESC supports 6S operation and monitor thermal performance during extended flights.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy T Motor Antigravity MN5008 KV170 Online in India

Purchase the T Motor Antigravity MN5008 KV170 online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on T Motor Antigravity MN5008 KV170 with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.