68 % ବନ୍ଦ |
Arduino L293D Motor Driver Shield
Drive up to 4 DC motors, 2 stepper motors, or 2 servo motors simultaneously with this versatile L293D Motor Driver Shield. Designed to stack directly onto Arduino Uno/Mega boards, it simplifies multi-motor robotics projects by providing dedicated motor control with individual speed and direction management - no complex wiring or breadboard setups needed. Available now from The Engineer Store, Bengaluru with fast shipping and full technical support.
Specifications
| Shield Compatibility | Arduino Uno, Mega, Duemilanove, Diecimila |
| Motor Driver IC | 2x L293D (dual H-bridge) |
| DC Motor Channels | 4 (bidirectional, individual speed control via PWM) |
| Stepper Motor Channels | 2 (unipolar or bipolar, single/double-coil, interleaved, or micro-stepping) |
| Servo Motor Channels | 2 (uses Arduino's dedicated servo pins) |
| Motor Supply Voltage | 4.5V - 25V DC (external terminal block) |
| Per-Channel Current | 600 mA continuous / 1.2A peak per L293D channel |
| Speed Control | PWM via 74HC595 shift register (frees Arduino I/O pins) |
| Direction Control | Full forward/reverse on all DC & stepper channels |
| Power Options | Separate motor power terminal or shared Arduino VIN (jumper selectable) |
| Shift Register | 74HC595 for motor latch - uses only 4 Arduino pins for all motor control |
| Pull-Down Resistors | Onboard - motors remain off during Arduino boot/reset |
| Board Dimensions | ~68 x 55 mm (standard Arduino shield footprint) |
| Library Support | Adafruit Motor Shield Library (AFMotor) - Arduino IDE compatible |
| Type | Motor Driver Shield / Electronics Module |
| Origin | Original/Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Why Choose This?
- 4-Motor Simultaneous Control: Drive up to 4 DC motors with individual speed (PWM) and direction control - ideal for omnidirectional robots and multi-actuator systems
- Versatile Motor Support: Handles DC motors, unipolar/bipolar stepper motors, and hobby servos from a single shield - eliminates the need for separate driver boards
- Minimal Pin Usage: 74HC595 shift register handles motor latching using only 4 Arduino pins, leaving plenty of I/O free for sensors, displays, and communication
- Plug-and-Play Stacking: Directly mounts onto Arduino Uno or Mega headers - no breadboard, no jumper wire mess, no soldering required for standard use
- Built-In Protection: Onboard pull-down resistors keep motors safely off during power-up and reset cycles, preventing unexpected movement
- Separate Power Domain: Dedicated motor power terminal (up to 25V) isolates high-current motor supply from Arduino logic - protects your microcontroller from voltage spikes
- Well-Supported Library: Adafruit AFMotor library provides simple functions for speed, direction, stepping modes, and servo control - get running in minutes
- 100% authentic from trusted suppliers
- 1-5 day shipping, 7-8 day delivery from Bengaluru warehouse
- Expert technical support included
Project Ideas
- 4WD Robot Car: Control all four drive motors independently for differential steering, tank turns, and variable-speed navigation with obstacle avoidance sensors.
- CNC Plotter / Drawing Machine: Use two stepper motor channels to drive X and Y axes for pen plotters, laser engravers, or small-scale CNC routers.
- Robotic Arm with Mobile Base: Dedicate two DC motor channels to a wheeled base for mobility while using two servo channels for arm gripper and rotation control.
- Automated Conveyor System: Drive multiple conveyor belts at different speeds for sorting, packaging, or material handling demonstrations in industrial automation projects.
- Camera Pan-Tilt Tracker: Mount two servos on a pan-tilt bracket and use the shield to create a face-tracking or sun-tracking camera platform with smooth motion control.
- Line-Following & Maze-Solving Robot: Pair with IR sensor arrays to build competition-ready robots that autonomously navigate tracks and solve mazes using proportional motor speed control.
What's in the Box
- 1x Arduino L293D Motor Driver Shield (fully assembled, ready to stack)
- Documentation and support materials
Frequently Asked Questions
Is this 100% authentic?
Yes, sourced
Buy Arduino L293D Motor Driver shield Online in India
Purchase the Arduino L293D Motor Driver shield online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Arduino L293D Motor Driver shield with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy Arduino L293D Motor Driver shield at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.
Arduino L293D Motor Driver Shield
Drive up to 4 DC motors, 2 stepper motors, or 2 servo motors simultaneously with this versatile L293D Motor Driver Shield. Designed to stack directly onto Arduino Uno/Mega boards, it simplifies multi-motor robotics projects by providing dedicated motor control with individual speed and direction management - no complex wiring or breadboard setups needed. Available now from The Engineer Store, Bengaluru with fast shipping and full technical support.
Specifications
| Shield Compatibility | Arduino Uno, Mega, Duemilanove, Diecimila |
| Motor Driver IC | 2x L293D (dual H-bridge) |
| DC Motor Channels | 4 (bidirectional, individual speed control via PWM) |
| Stepper Motor Channels | 2 (unipolar or bipolar, single/double-coil, interleaved, or micro-stepping) |
| Servo Motor Channels | 2 (uses Arduino's dedicated servo pins) |
| Motor Supply Voltage | 4.5V - 25V DC (external terminal block) |
| Per-Channel Current | 600 mA continuous / 1.2A peak per L293D channel |
| Speed Control | PWM via 74HC595 shift register (frees Arduino I/O pins) |
| Direction Control | Full forward/reverse on all DC & stepper channels |
| Power Options | Separate motor power terminal or shared Arduino VIN (jumper selectable) |
| Shift Register | 74HC595 for motor latch - uses only 4 Arduino pins for all motor control |
| Pull-Down Resistors | Onboard - motors remain off during Arduino boot/reset |
| Board Dimensions | ~68 x 55 mm (standard Arduino shield footprint) |
| Library Support | Adafruit Motor Shield Library (AFMotor) - Arduino IDE compatible |
| Type | Motor Driver Shield / Electronics Module |
| Origin | Original/Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Why Choose This?
- 4-Motor Simultaneous Control: Drive up to 4 DC motors with individual speed (PWM) and direction control - ideal for omnidirectional robots and multi-actuator systems
- Versatile Motor Support: Handles DC motors, unipolar/bipolar stepper motors, and hobby servos from a single shield - eliminates the need for separate driver boards
- Minimal Pin Usage: 74HC595 shift register handles motor latching using only 4 Arduino pins, leaving plenty of I/O free for sensors, displays, and communication
- Plug-and-Play Stacking: Directly mounts onto Arduino Uno or Mega headers - no breadboard, no jumper wire mess, no soldering required for standard use
- Built-In Protection: Onboard pull-down resistors keep motors safely off during power-up and reset cycles, preventing unexpected movement
- Separate Power Domain: Dedicated motor power terminal (up to 25V) isolates high-current motor supply from Arduino logic - protects your microcontroller from voltage spikes
- Well-Supported Library: Adafruit AFMotor library provides simple functions for speed, direction, stepping modes, and servo control - get running in minutes
- 100% authentic from trusted suppliers
- 1-5 day shipping, 7-8 day delivery from Bengaluru warehouse
- Expert technical support included
Project Ideas
- 4WD Robot Car: Control all four drive motors independently for differential steering, tank turns, and variable-speed navigation with obstacle avoidance sensors.
- CNC Plotter / Drawing Machine: Use two stepper motor channels to drive X and Y axes for pen plotters, laser engravers, or small-scale CNC routers.
- Robotic Arm with Mobile Base: Dedicate two DC motor channels to a wheeled base for mobility while using two servo channels for arm gripper and rotation control.
- Automated Conveyor System: Drive multiple conveyor belts at different speeds for sorting, packaging, or material handling demonstrations in industrial automation projects.
- Camera Pan-Tilt Tracker: Mount two servos on a pan-tilt bracket and use the shield to create a face-tracking or sun-tracking camera platform with smooth motion control.
- Line-Following & Maze-Solving Robot: Pair with IR sensor arrays to build competition-ready robots that autonomously navigate tracks and solve mazes using proportional motor speed control.
What's in the Box
- 1x Arduino L293D Motor Driver Shield (fully assembled, ready to stack)
- Documentation and support materials
Frequently Asked Questions
Is this 100% authentic?
Yes, sourced
Buy Arduino L293D Motor Driver shield Online in India
Purchase the Arduino L293D Motor Driver shield online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Arduino L293D Motor Driver shield with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy Arduino L293D Motor Driver shield at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.