47 % ବନ୍ଦ |
```html
Stepper Motor (28YBJ-48) with ULN2003 Driver Board
Get precise rotational control for your Arduino, Raspberry Pi, and microcontroller projects with this reliable 28BYJ-48 stepper motor bundled with the ULN2003 driver board. Available at The Engineer Store, Bengaluru - your trusted source for quality electronics with fast shipping and dedicated support.
Specifications
| Motor Model | 28BYJ-48 Unipolar Stepper Motor |
| Driver IC | ULN2003A Darlington Transistor Array |
| Operating Voltage | 5V DC |
| Phase | 4-Phase, 5-Wire |
| Step Angle | 5.625 degrees per step (half-step mode) |
| Steps Per Revolution | 4096 (half-step) / 2048 (full-step) |
| Gear Ratio | 1:64 |
| Frequency | 100 Hz |
| DC Resistance | 50Ohm +/- 7% (25 degreesC) |
| In-traction Torque | > 34.3 mNm (120 Hz) |
| Self-positioning Torque | > 34.3 mNm |
| Noise Level | <= 35 dB |
| Driver Board Indicators | 4 LEDs showing phase activation status |
| Connector | Standard 5-pin female header (motor to driver board) |
| Driver Board Input Pins | IN1, IN2, IN3, IN4 + VCC + GND |
| Compatibility | Arduino, Raspberry Pi, ESP32, ESP8266, STM32, PIC, and other microcontrollers |
| Motor Dimensions | Approx. 28mm diameter body |
| Weight | Approx. 30g (motor) + 10g (driver board) |
| Origin | Original / Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- Complete Motor + Driver Kit: Includes the 28BYJ-48 stepper motor pre-wired with a 5-pin connector that plugs directly into the ULN2003 driver board - no soldering required for basic setup.
- High Precision Control: With 4096 steps per revolution in half-step mode (5.625 degrees step angle with 1:64 gear reduction), achieve smooth and accurate rotational positioning for demanding applications.
- Built-in LED Phase Indicators: The ULN2003 driver board features 4 onboard LEDs that visually indicate which coil phases are active, making debugging and learning significantly easier.
- 5V Operation: Runs directly from the 5V output of Arduino and most development boards - no external high-voltage power supply needed for basic operation.
- Low Noise Operation: Rated at <= 35 dB, making it suitable for indoor projects, camera sliders, display turntables, and environments where quiet operation matters.
- Beginner-Friendly: Extensive library support in the Arduino IDE (Stepper.h and AccelStepper) means you can have the motor spinning within minutes of unboxing.
- Compact & Lightweight: The small 28mm motor body and lightweight driver board fit easily into enclosures, 3D-printed assemblies, and space-constrained builds.
Why Choose This?
- 100% authentic components from trusted suppliers - no clones or counterfeits
- Motor and driver board are tested and matched for reliable plug-and-play operation
- 1-5 day shipping, 7-8 day delivery across India from our Bengaluru warehouse
- Expert technical support included - get help with wiring, code, and project integration
- Ideal for both learning and real-world deployment
Project Ideas
- Automated Blinds & Curtain Controller: Use the stepper motor to open and close window blinds on a schedule or via smartphone control with an ESP32 or Arduino + Bluetooth module.
- 3D Printer & CNC Components: Prototype axis movement systems or build a mini pen plotter using multiple 28BYJ-48 motors for X and Y axis control.
- Camera Pan/Tilt Platform: Build a smooth, programmable camera mount for time-lapse photography or surveillance applications with precise angular control.
- Product Display Turntable: Create a motorized rotating platform for product photography, exhibitions, or retail displays with adjustable speed.
- Robotic Arm Joints: Use as lightweight actuators in small robotic arms and educational robotics kits where moderate torque and precise positioning are needed.
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy Stepper Motor(28YBJ-48) with ULN2003 Driver Board Online in India
Purchase the Stepper Motor(28YBJ-48) with ULN2003 Driver Board online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Stepper Motor(28YBJ-48) with ULN2003 Driver Board with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy Stepper Motor(28YBJ-48) with ULN2003 Driver Board at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.
```html
Stepper Motor (28YBJ-48) with ULN2003 Driver Board
Get precise rotational control for your Arduino, Raspberry Pi, and microcontroller projects with this reliable 28BYJ-48 stepper motor bundled with the ULN2003 driver board. Available at The Engineer Store, Bengaluru - your trusted source for quality electronics with fast shipping and dedicated support.
Specifications
| Motor Model | 28BYJ-48 Unipolar Stepper Motor |
| Driver IC | ULN2003A Darlington Transistor Array |
| Operating Voltage | 5V DC |
| Phase | 4-Phase, 5-Wire |
| Step Angle | 5.625 degrees per step (half-step mode) |
| Steps Per Revolution | 4096 (half-step) / 2048 (full-step) |
| Gear Ratio | 1:64 |
| Frequency | 100 Hz |
| DC Resistance | 50Ohm +/- 7% (25 degreesC) |
| In-traction Torque | > 34.3 mNm (120 Hz) |
| Self-positioning Torque | > 34.3 mNm |
| Noise Level | <= 35 dB |
| Driver Board Indicators | 4 LEDs showing phase activation status |
| Connector | Standard 5-pin female header (motor to driver board) |
| Driver Board Input Pins | IN1, IN2, IN3, IN4 + VCC + GND |
| Compatibility | Arduino, Raspberry Pi, ESP32, ESP8266, STM32, PIC, and other microcontrollers |
| Motor Dimensions | Approx. 28mm diameter body |
| Weight | Approx. 30g (motor) + 10g (driver board) |
| Origin | Original / Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- Complete Motor + Driver Kit: Includes the 28BYJ-48 stepper motor pre-wired with a 5-pin connector that plugs directly into the ULN2003 driver board - no soldering required for basic setup.
- High Precision Control: With 4096 steps per revolution in half-step mode (5.625 degrees step angle with 1:64 gear reduction), achieve smooth and accurate rotational positioning for demanding applications.
- Built-in LED Phase Indicators: The ULN2003 driver board features 4 onboard LEDs that visually indicate which coil phases are active, making debugging and learning significantly easier.
- 5V Operation: Runs directly from the 5V output of Arduino and most development boards - no external high-voltage power supply needed for basic operation.
- Low Noise Operation: Rated at <= 35 dB, making it suitable for indoor projects, camera sliders, display turntables, and environments where quiet operation matters.
- Beginner-Friendly: Extensive library support in the Arduino IDE (Stepper.h and AccelStepper) means you can have the motor spinning within minutes of unboxing.
- Compact & Lightweight: The small 28mm motor body and lightweight driver board fit easily into enclosures, 3D-printed assemblies, and space-constrained builds.
Why Choose This?
- 100% authentic components from trusted suppliers - no clones or counterfeits
- Motor and driver board are tested and matched for reliable plug-and-play operation
- 1-5 day shipping, 7-8 day delivery across India from our Bengaluru warehouse
- Expert technical support included - get help with wiring, code, and project integration
- Ideal for both learning and real-world deployment
Project Ideas
- Automated Blinds & Curtain Controller: Use the stepper motor to open and close window blinds on a schedule or via smartphone control with an ESP32 or Arduino + Bluetooth module.
- 3D Printer & CNC Components: Prototype axis movement systems or build a mini pen plotter using multiple 28BYJ-48 motors for X and Y axis control.
- Camera Pan/Tilt Platform: Build a smooth, programmable camera mount for time-lapse photography or surveillance applications with precise angular control.
- Product Display Turntable: Create a motorized rotating platform for product photography, exhibitions, or retail displays with adjustable speed.
- Robotic Arm Joints: Use as lightweight actuators in small robotic arms and educational robotics kits where moderate torque and precise positioning are needed.
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy Stepper Motor(28YBJ-48) with ULN2003 Driver Board Online in India
Purchase the Stepper Motor(28YBJ-48) with ULN2003 Driver Board online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Stepper Motor(28YBJ-48) with ULN2003 Driver Board with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy Stepper Motor(28YBJ-48) with ULN2003 Driver Board at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.