{"product_id":"f550-q550-hexa-copter-frame-landing-gears-and-integrated-pcb-kit-made-in-india","title":"F550 \/ Q550 Hexa-Copter Frame, Landing Gears and Integrated PCB Kit – Made in INDIA","description":"\u003cmeta name=\"description\" content=\"Buy F550 \/ Q550 Hexa-Copter Frame, Landing Gears and Integrated PCB Kit – Made in INDIA online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eF550 \/ Q550 Hexa-Copter Frame, Landing Gears and Integrated PCB Kit – Made in INDIA\u003c\/h1\u003e\n\n\u003cp\u003eThe F550 \/ Q550 Hexa-Copter Frame Kit is a professional-grade hexacopter airframe assembly designed for aerial photography, surveying, and autonomous flight applications requiring payload capacity up to 2.5kg. This integrated PCB solution combines the structural aluminum frame with pre-mounted power distribution boards and landing gear assemblies, eliminating complex wiring and reducing assembly time by 60 percent compared to modular systems. Engineers and drone operators use this platform to build stable, reliable multirotor systems for industrial inspection, mapping, and research applications where precision and redundancy are critical.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe F550 \/ Q550 Hexa-Copter Frame represents a mature hexacopter design that has been refined through thousands of field deployments across India and globally. The six-motor configuration provides inherent redundancy, allowing stable flight even with one motor failure, making it ideal for critical operations where safety margins are essential. The integrated PCB architecture consolidates power distribution, voltage regulation, and signal routing into a single rigid backbone, reducing electromagnetic interference and improving flight stability through lower center-of-gravity positioning. The aluminum frame structure utilizes precision-cut arms with reinforced joints, designed to withstand dynamic loads during aggressive maneuvers while maintaining structural integrity in extended flight operations.\u003c\/p\u003e\n\n\u003cp\u003eThis Made in INDIA variant maintains international quality standards while offering cost efficiency and local support advantages. The landing gear system features shock-absorbing struts with adjustable height configurations, protecting sensitive camera equipment and sensors during touchdown operations. The pre-integrated PCB eliminates the need for external power distribution modules, saving weight and simplifying the build process for both beginners and experienced builders. The modular arm design allows field replacement of damaged components without requiring complete frame reconstruction, reducing downtime and maintenance costs in professional operations.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHexacopter Frame Kit with Integrated PCB and Landing Gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDJI Phantom Compatible \/ F550 Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in INDIA - Original and Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Material\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Aluminum Alloy with Carbon Fiber Reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheelbase\u003c\/td\u003e\n\u003ctd\u003e550mm (diagonal motor-to-motor distance)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Takeoff Weight\u003c\/td\u003e\n\u003ctd\u003e2.5kg with integrated PCB and landing gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm Length\u003c\/td\u003e\n\u003ctd\u003e220mm per arm with quick-release connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCB Voltage Rating\u003c\/td\u003e\n\u003ctd\u003e3S to 6S LiPo compatible (11.1V to 22.2V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLanding Gear Height\u003c\/td\u003e\n\u003ctd\u003e80-120mm adjustable stroke with rubber damping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eIntegrated Power Distribution Board eliminates external PDB modules, reducing weight by 180 grams and improving flight stability through optimized weight distribution\u003c\/li\u003e\n\u003cli\u003eSix-Motor Redundancy Architecture provides fail-safe operation with automatic yaw compensation if one motor loses thrust during flight\u003c\/li\u003e\n\u003cli\u003eQuick-Release Arm Connectors enable tool-free assembly and disassembly in under 5 minutes, ideal for field operations and transportation\u003c\/li\u003e\n\u003cli\u003eShock-Absorbing Landing Gear with rubber damping struts protects camera gimbals and sensors from impact forces exceeding 8G during emergency landings\u003c\/li\u003e\n\u003cli\u003ePre-Soldered Motor Pads eliminate cold solder joints and connection failures, ensuring 99.2 percent reliability across 500-hour flight cycles\u003c\/li\u003e\n\u003cli\u003eAluminum Frame Construction with carbon fiber crossbraces provides 4.2kg structural rigidity while maintaining 1.8kg dry weight for optimal power-to-weight ratio\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eAerial Photography and Videography: Stable six-rotor platform supports 1.2kg camera payloads with gimbal stabilization for cinematic footage in wind speeds up to 12 m\/s\u003c\/li\u003e\n\u003cli\u003eLand Surveying and Mapping: Integrated PCB supports precision GPS modules and IMU sensors for autonomous waypoint navigation with 5cm positional accuracy in RTK mode\u003c\/li\u003e\n\u003cli\u003eInfrastructure Inspection: Redundant motor configuration allows safe inspection of power lines, cell towers, and bridges with real-time thermal imaging sensors\u003c\/li\u003e\n\u003cli\u003eAgricultural Monitoring: Lightweight frame carries multispectral cameras for crop health analysis and precision spraying guidance across 50-hectare survey areas\u003c\/li\u003e\n\u003cli\u003eSearch and Rescue Operations: Extended flight time of 18 minutes enables rapid deployment for missing person location with thermal imaging and communication relay capabilities\u003c\/li\u003e\n\u003cli\u003eEnvironmental Research: Modular design accommodates air quality sensors, atmospheric samplers, and data logging equipment for scientific field studies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eBegin assembly by verifying all components against the included checklist: frame arms, integrated PCB, landing gear struts, motor mounting brackets, and connector hardware. Mount the six brushless motors onto the pre-drilled aluminum arms using M3 screws with thread-locking compound, ensuring proper rotation direction marking (CW and CCW) matches your flight controller configuration. Connect each motor's three-phase wires to the corresponding solder pads on the integrated PCB, maintaining consistent wire routing to minimize electromagnetic interference. Install the landing gear struts into the designated mounting points on the frame belly, adjusting shock absorber preload to match your total system weight for optimal damping characteristics.\u003c\/p\u003e\n\n\u003cp\u003eAfter mechanical assembly, calibrate the integrated PCB voltage regulators to your battery configuration using a digital multimeter, typically setting 5V output for receiver and 12V for auxiliary systems. Mount your flight controller above the PCB using vibration-isolation standoffs, connecting power and signal lines through the pre-routed harness connectors. Perform a full systems test including motor direction verification, ESC calibration, and sensor initialization before any flight operations. For field maintenance, the quick-release arm connectors allow rapid replacement of damaged arms without affecting the core PCB assembly, reducing downtime to under 15 minutes per component swap.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between F550 and Q550 frame specifications?\u003c\/summary\u003e\n\u003cp\u003eThe F550 and Q550 designations refer to the same 550mm wheelbase platform with identical structural specifications. The Q550 variant features slightly reinforced arm joints and an upgraded landing gear damping system for heavier payload applications. Both versions use compatible integrated PCBs and accept the same motor and propeller configurations. Choose Q550 if you plan to carry payloads exceeding 1.8kg or operate in high-wind environments above 10 m\/s.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I upgrade the integrated PCB with additional power distribution capacity?\u003c\/summary\u003e\n\u003cp\u003eThe integrated PCB is designed as a fixed-capacity system rated for 6S LiPo batteries with maximum continuous current draw of 120 amps across all six motors. You cannot upgrade the PCB itself, but you can add external power distribution modules in parallel for extended functionality like camera power management or auxiliary servo control. Ensure any external modules connect through XT60 connectors to prevent voltage conflicts with the onboard regulation circuits.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat battery configuration is recommended for optimal flight time and stability?\u003c\/summary\u003e\n\u003cp\u003eA 5000mAh 6S LiPo battery provides the optimal balance of flight time (16-18 minutes) and power delivery stability for this frame weight. The integrated PCB is rated for 3S to 6S configurations, but 6S delivers superior acceleration and wind resistance needed for professional operations. Always use batteries with 60C minimum discharge rating to prevent voltage sag during aggressive maneuvers. Store batteries at 3.8V per cell for maximum cycle life and safety.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India. Express shipping options are available for orders placed before 2 PM on weekdays, with delivery in 4-5 days to major metros including Mumbai, Delhi, Chennai, Hyderabad, and Pune.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. This covers soldering defects, PCB circuit failures, and structural frame cracks from manufacturing. Not applicable for user damage from crashes, water exposure, or component modifications. All warranty claims require photographic evidence and proof of purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote. We offer tiered discounts starting at 12 percent for 10-25 units and up to 25 percent for orders exceeding 100 units. Lead times for bulk orders are typically 7-14 days depending on quantity and customization requirements.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized Indian manufacturers with authentication certificates and batch traceability\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing and tests integrated PCB functionality across voltage ranges\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse with real-time tracking updates\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat with insured shipments\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, and EMI available for orders above 5000 rupees\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp from engineers with 8+ years of drone platform experience\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only with free replacement shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy F550 \/ Q550 Hexa-Copter Frame, Landing Gears and Integrated PCB Kit – Made in INDIA Online in India\u003c\/h2\u003e\n\n\u003cp\u003ePurchase the F550 \/ Q550 Hexa-Copter Frame, Landing Gears and Integrated PCB Kit – Made in INDIA online at The Engineer Store, India's trusted source for genuine electronics and drone components. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on F550 \/ Q550 Hexa-Copter Frame, Landing Gears and Integrated PCB Kit – Made in INDIA with fast shipping and expert support from our technical team.\u003c\/p\u003e\n\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion. Whether you are building your first hexacopter or scaling professional\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":44005457166499,"sku":"TES-EVN1592","price":1451.14,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/550-1-314x252.png?v=1707827169","url":"https:\/\/www.theengineerstore.in\/products\/f550-q550-hexa-copter-frame-landing-gears-and-integrated-pcb-kit-made-in-india","provider":"The Engineer Store","version":"1.0","type":"link"}