Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing
- அலகு விலை
- / ஒன்றுக்கு
Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing
The Cyclone 35A is a high-performance brushless Electronic Speed Controller (ESC) specifically engineered for competitive FPV racing drones and high-speed RC aircraft. This 35-ampere ESC supports 2S to 6S LiPo battery configurations with Blheli_S firmware, enabling advanced motor control protocols including DSHOT600 for ultra-responsive throttle input and minimal latency. Professional FPV pilots and drone racing enthusiasts rely on this ESC to achieve consistent flight performance, precise motor synchronization, and reliable power delivery during aggressive maneuvers and high-G racing conditions.
Product Overview
The Cyclone 35A Blheli_S DSHOT600 ESC represents cutting-edge motor control technology for modern FPV racing platforms. The ESC operates by converting DC battery voltage into three-phase AC output to drive brushless motors with exceptional efficiency and responsiveness. The integrated Blheli_S firmware provides advanced features including bidirectional DSHOT protocol support, allowing real-time motor telemetry feedback and synchronization with flight control boards. The optoisolated design electrically isolates the signal lines from the power stage, eliminating ground loop noise and ensuring clean signal transmission even in electromagnetically noisy environments typical of high-power racing drones.
What distinguishes the Cyclone 35A is its DSHOT600 protocol capability, which operates at 600 kilobaud transmission speed—double the standard DSHOT300 rate. This enables sub-microsecond command latency and superior motor response characteristics critical for precision racing. The 35-ampere continuous rating with dynamic current limiting provides sufficient headroom for 5-inch and 7-inch racing frame builds while protecting against motor stalls and sudden load spikes. The compact form factor and integrated capacitor bank minimize voltage ripple and electromagnetic interference, delivering stable power to high-KV racing motors operating at extreme RPM ranges.
Key Specifications
| Specification | Details |
| Product Type | Brushless Electronic Speed Controller (ESC) |
| Brand | Cyclone |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| Continuous Current Rating | 35 Amperes |
| Burst Current Rating | 45 Amperes (10 seconds) |
| Battery Configuration | 2S to 6S LiPo |
| Protocol Support | DSHOT600, DSHOT300, PWM |
| Firmware | Blheli_S (Bootloader enabled) |
| Optoisolation | Yes - Signal isolated from power stage |
Key Features
- DSHOT600 Protocol Support: 600 kilobaud transmission speed delivers sub-microsecond command latency for razor-sharp motor response during high-speed racing maneuvers and precision acrobatics
- Blheli_S Firmware: Advanced open-source firmware with bidirectional telemetry, motor timing optimization, and dynamic braking control for maximum efficiency and reliability
- Optoisolated Design: Complete electrical isolation between signal and power circuits eliminates ground loop noise and ensures clean signal integrity in electromagnetically hostile racing environments
- Wide Battery Compatibility: Supports 2S through 6S LiPo configurations enabling flexibility across micro, 5-inch, and 7-inch racing drone platforms
- Integrated Protection Circuits: Automatic current limiting, low-voltage cutoff, and thermal management prevent component damage during extreme racing conditions
- Compact Form Factor: Lightweight construction minimizes frame weight while maintaining robust power handling for competitive advantage
Applications and Use Cases
- FPV Drone Racing: Delivers DSHOT600 responsiveness required for competitive racing gates, precision flying, and split-second control inputs in organized drone racing leagues and events
- High-Speed Freestyle Flying: Enables aggressive acrobatic maneuvers, flips, and rolls with consistent motor synchronization across all three motors on racing quadcopters
- Long-Range FPV Cruising: Supports extended flight times on 6S batteries with efficient power delivery and telemetry feedback for monitoring motor health during extended missions
- Aerial Photography Platforms: Provides stable motor control for smooth gimbal operation and consistent thrust vectoring on professional FPV camera drones
- Experimental Drone Development: Bootloader-enabled Blheli_S firmware allows custom tuning and firmware updates for research and performance optimization projects
How to Use
Begin by identifying your flight controller's ESC connector pinout and signal protocol requirements—confirm DSHOT600 compatibility before installation. Mount the Cyclone 35A ESC on your racing frame using vibration-dampening materials, ensuring proper heat dissipation and avoiding contact with carbon fiber edges. Connect the three motor wires in sequence to your brushless motor, verifying correct rotation direction using your flight controller's motor test feature. For signal connection, attach the ground and signal lines to your flight controller's designated ESC port, ensuring the optoisolated signal remains isolated from power distribution board grounds to maximize noise immunity.
Configure Blheli_S firmware using Blheli Suite or similar configuration software—set DSHOT600 protocol, enable bidirectional telemetry if your flight controller supports it, and calibrate throttle endpoints for your specific battery configuration. Perform an ESC calibration procedure by connecting your fully-charged battery, sending maximum throttle command, then minimum throttle command through your transmitter to establish correct throttle range recognition. Test motor response at low throttle levels before flight operations to confirm smooth acceleration without stuttering or synchronization issues. Monitor motor temperatures during initial flights and adjust timing parameters if motors run excessively hot, indicating suboptimal efficiency.
Frequently Asked Questions
What is the difference between DSHOT600 and DSHOT300 protocols?
DSHOT600 operates at 600 kilobaud transmission speed versus DSHOT300's 300 kilobaud, effectively doubling the command update frequency. This reduces signal latency to sub-microsecond levels, enabling faster motor response and superior synchronization between multiple ESCs. DSHOT600 is essential for competitive FPV racing where millisecond-level improvements in control responsiveness directly impact lap times and maneuver precision.
Can I use the Cyclone 35A ESC on 2S batteries for micro racing drones?
Yes, the Cyclone 35A supports 2S through 6S LiPo configurations. On 2S batteries, the ESC operates at approximately 7.4V nominal voltage, providing adequate power for micro racing frames with smaller brushless motors. However, verify your motor's voltage rating and KV specification to ensure compatibility—micro motors typically require higher KV values to generate sufficient thrust at lower voltages.
Is the optoisolation feature necessary for my racing drone setup?
Optoisolation provides significant advantages in racing environments where high-current switching creates electromagnetic noise. The isolation prevents ground loop currents from degrading signal quality to your flight controller, resulting in cleaner gyro readings and more stable flight characteristics. While not absolutely mandatory, optoisolation is highly recommended for competitive racing where every millisecond of stability improvement contributes to faster lap times.
What firmware versions does the Cyclone 35A support?
The Cyclone 35A comes with Blheli_S firmware and includes a bootloader for firmware updates. You can upgrade to the latest Blheli_S versions using Blheli Suite software and a compatible USB programmer. This enables access to new features, performance improvements, and bug fixes released by the Blheli development community.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing Online in India
Purchase the Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.
Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing
- அலகு விலை
- / ஒன்றுக்கு
உங்கள் வண்டியில் தயாரிப்பு சேர்க்கிறது
நீயும் விரும்புவாய்
Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing
The Cyclone 35A is a high-performance brushless Electronic Speed Controller (ESC) specifically engineered for competitive FPV racing drones and high-speed RC aircraft. This 35-ampere ESC supports 2S to 6S LiPo battery configurations with Blheli_S firmware, enabling advanced motor control protocols including DSHOT600 for ultra-responsive throttle input and minimal latency. Professional FPV pilots and drone racing enthusiasts rely on this ESC to achieve consistent flight performance, precise motor synchronization, and reliable power delivery during aggressive maneuvers and high-G racing conditions.
Product Overview
The Cyclone 35A Blheli_S DSHOT600 ESC represents cutting-edge motor control technology for modern FPV racing platforms. The ESC operates by converting DC battery voltage into three-phase AC output to drive brushless motors with exceptional efficiency and responsiveness. The integrated Blheli_S firmware provides advanced features including bidirectional DSHOT protocol support, allowing real-time motor telemetry feedback and synchronization with flight control boards. The optoisolated design electrically isolates the signal lines from the power stage, eliminating ground loop noise and ensuring clean signal transmission even in electromagnetically noisy environments typical of high-power racing drones.
What distinguishes the Cyclone 35A is its DSHOT600 protocol capability, which operates at 600 kilobaud transmission speed—double the standard DSHOT300 rate. This enables sub-microsecond command latency and superior motor response characteristics critical for precision racing. The 35-ampere continuous rating with dynamic current limiting provides sufficient headroom for 5-inch and 7-inch racing frame builds while protecting against motor stalls and sudden load spikes. The compact form factor and integrated capacitor bank minimize voltage ripple and electromagnetic interference, delivering stable power to high-KV racing motors operating at extreme RPM ranges.
Key Specifications
| Specification | Details |
| Product Type | Brushless Electronic Speed Controller (ESC) |
| Brand | Cyclone |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| Continuous Current Rating | 35 Amperes |
| Burst Current Rating | 45 Amperes (10 seconds) |
| Battery Configuration | 2S to 6S LiPo |
| Protocol Support | DSHOT600, DSHOT300, PWM |
| Firmware | Blheli_S (Bootloader enabled) |
| Optoisolation | Yes - Signal isolated from power stage |
Key Features
- DSHOT600 Protocol Support: 600 kilobaud transmission speed delivers sub-microsecond command latency for razor-sharp motor response during high-speed racing maneuvers and precision acrobatics
- Blheli_S Firmware: Advanced open-source firmware with bidirectional telemetry, motor timing optimization, and dynamic braking control for maximum efficiency and reliability
- Optoisolated Design: Complete electrical isolation between signal and power circuits eliminates ground loop noise and ensures clean signal integrity in electromagnetically hostile racing environments
- Wide Battery Compatibility: Supports 2S through 6S LiPo configurations enabling flexibility across micro, 5-inch, and 7-inch racing drone platforms
- Integrated Protection Circuits: Automatic current limiting, low-voltage cutoff, and thermal management prevent component damage during extreme racing conditions
- Compact Form Factor: Lightweight construction minimizes frame weight while maintaining robust power handling for competitive advantage
Applications and Use Cases
- FPV Drone Racing: Delivers DSHOT600 responsiveness required for competitive racing gates, precision flying, and split-second control inputs in organized drone racing leagues and events
- High-Speed Freestyle Flying: Enables aggressive acrobatic maneuvers, flips, and rolls with consistent motor synchronization across all three motors on racing quadcopters
- Long-Range FPV Cruising: Supports extended flight times on 6S batteries with efficient power delivery and telemetry feedback for monitoring motor health during extended missions
- Aerial Photography Platforms: Provides stable motor control for smooth gimbal operation and consistent thrust vectoring on professional FPV camera drones
- Experimental Drone Development: Bootloader-enabled Blheli_S firmware allows custom tuning and firmware updates for research and performance optimization projects
How to Use
Begin by identifying your flight controller's ESC connector pinout and signal protocol requirements—confirm DSHOT600 compatibility before installation. Mount the Cyclone 35A ESC on your racing frame using vibration-dampening materials, ensuring proper heat dissipation and avoiding contact with carbon fiber edges. Connect the three motor wires in sequence to your brushless motor, verifying correct rotation direction using your flight controller's motor test feature. For signal connection, attach the ground and signal lines to your flight controller's designated ESC port, ensuring the optoisolated signal remains isolated from power distribution board grounds to maximize noise immunity.
Configure Blheli_S firmware using Blheli Suite or similar configuration software—set DSHOT600 protocol, enable bidirectional telemetry if your flight controller supports it, and calibrate throttle endpoints for your specific battery configuration. Perform an ESC calibration procedure by connecting your fully-charged battery, sending maximum throttle command, then minimum throttle command through your transmitter to establish correct throttle range recognition. Test motor response at low throttle levels before flight operations to confirm smooth acceleration without stuttering or synchronization issues. Monitor motor temperatures during initial flights and adjust timing parameters if motors run excessively hot, indicating suboptimal efficiency.
Frequently Asked Questions
What is the difference between DSHOT600 and DSHOT300 protocols?
DSHOT600 operates at 600 kilobaud transmission speed versus DSHOT300's 300 kilobaud, effectively doubling the command update frequency. This reduces signal latency to sub-microsecond levels, enabling faster motor response and superior synchronization between multiple ESCs. DSHOT600 is essential for competitive FPV racing where millisecond-level improvements in control responsiveness directly impact lap times and maneuver precision.
Can I use the Cyclone 35A ESC on 2S batteries for micro racing drones?
Yes, the Cyclone 35A supports 2S through 6S LiPo configurations. On 2S batteries, the ESC operates at approximately 7.4V nominal voltage, providing adequate power for micro racing frames with smaller brushless motors. However, verify your motor's voltage rating and KV specification to ensure compatibility—micro motors typically require higher KV values to generate sufficient thrust at lower voltages.
Is the optoisolation feature necessary for my racing drone setup?
Optoisolation provides significant advantages in racing environments where high-current switching creates electromagnetic noise. The isolation prevents ground loop currents from degrading signal quality to your flight controller, resulting in cleaner gyro readings and more stable flight characteristics. While not absolutely mandatory, optoisolation is highly recommended for competitive racing where every millisecond of stability improvement contributes to faster lap times.
What firmware versions does the Cyclone 35A support?
The Cyclone 35A comes with Blheli_S firmware and includes a bootloader for firmware updates. You can upgrade to the latest Blheli_S versions using Blheli Suite software and a compatible USB programmer. This enables access to new features, performance improvements, and bug fixes released by the Blheli development community.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing Online in India
Purchase the Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.
நீயும் விரும்புவாய்
நீயும் விரும்புவாய்
பரிந்துரைக்கப்பட்ட தயாரிப்புகள்
விரைவான சேவை மற்றும் பதில், தயாரிப்பு தரம் மற்றும் பேக்கிங் திருப்திகரமாக உள்ளது.
நன்கு கட்டப்பட்ட கடை, விற்பனை மட்டுமல்ல, அவை உங்கள் கட்டிடத்தையும் உருவாக்குகின்றன. கூட அவர்கள் கருத்தரங்கு நடத்துகிறார் கள். நியாயமான விலையில் பொருட்கள் கிடைக்கும்
சேவை மற்றும் விருந்தோம்பலில் மிகவும் மகிழ்ச்சி. பொறியாளர்களுக்கான திட்டங்களைத் தீர்க்க சரியான இடம். எனது திட்டத்தில் சில சிக்கல்கள் இருந்தன, அங்குள்ள தோழர்களுடன் சென்று அமர்ந்தேன். நாங்கள் 4 மணிநேரம் வேலை செய்தோம், வெளியீடு வந்தது. சிறந்த பகுதியாக நாங்கள் பெற்ற சேவை, மிகவும் மகிழ்ச்சி மற்றும் பாராட்டப்பட்டது. மிக்க நன்றி இன்ஜினியர் ஸ்டோர்
மிகவும் நல்ல வாடிக்கையாளர் சேவை, எப்போதும் உதவ தயாராக உள்ளது. அவர்கள் தொடர்ந்து 4 மணிநேரம் எங்கள் திட்டத்தில் எங்களுக்கு உதவினார்கள், தங்கள் வேலையை விட்டுவிட்டார்கள். கடைசியில் ஒரு பைசா கூட வாங்க மறுத்துவிட்டனர். அற்புதமான மனிதர்கள்
இந்தப் படிவத்தைப் பூர்த்தி செய்வதன் மூலம், எங்களின் மின்னஞ்சல்களைப் பெற நீங்கள் பதிவு செய்கிறீர்கள் மேலும் எந்த நேரத்திலும் குழுவிலகலாம்.
FAQ Below are some of are common questions:
Shipping charge & Delivery timeline.
1) Standard shipping: Rs 49- The order gets delivered within 3-5 working days. (6-7 days in case of the battery as it travels through the surface)
2)Free shipping is applicable to the purchase of Rs.499 and above. The order gets delivered within 5-7 working days. (8-10 days in case of the battery as it travels through the surface)
3)Blue dart Air shipping Rs: 99 and above depending on parcel weight the order gets delivered within3-5working days.
4) Same-day delivery only applicable for Pune-specific pin codes Rs-79 delivery will be done same day between 1 p.m to 9 p.m (the order should be placed before 12:30 p.m)
How do I pay for my order?
You can pay through multiple payment options on theengineerstore.in the checkout page. You can pay through Credit/Debit Card, Internet Banking, Mobile Payments, Manual bank transfer, and Wallets. You can also apply a coupon that you might receive from The Engineer store or redeem The Engineer store points that you have earned from your previous purchases.
Cash on Delivery is offered theengineerstore.in and it is location dependent. Applicability of COD is determined by our system once you enter the pin-code of your area. Also the COD service is chargeable (Rs.25). It is charged by the shipping company for cash handlings.
Once you place a COD order, our executive will call you to confirm your order only after which your order will be processed.
It is best to prepay your order and buy confidently.
You can pay through multiple payment options on theengineerstore.in the checkout page. You can pay through Credit/Debit Card, Internet Banking, Mobile Payments, Manual bank transfer, and Wallets. You can also apply a coupon that you might receive from The Engineer store or redeem The Engineer store points that you have earned from your previous purchases.
Cash on Delivery is offered theengineerstore.in and it is location dependent. Applicability of COD is determined by our system once you enter the pin-code of your area. Also the COD service is chargeable (Rs.25). It is charged by the shipping company for cash handlings.
Once you place a COD order, our executive will call you to confirm your order only after which your order will be processed.
It is best to prepay your order and buy confidently.
It is understandable that a customer will have some technical query before making any purchase on theengineerstore.in.
No worries, we are there to answer your technical queries.
What customer needs to do?Submit a ticket mentioning1. Product code/SKU--->It is found on the product page.(just on the right hand side of the product image)2. Brief description of your query.Once we receive your query, we will get back to you soon with the possible answers.
It happens sometimes, In such cases the money is neither with us nor with the bank but if we receive your money without order, we will refund it within 2-3 working days. Rest assured, the money will come back to your bank account after 10-15 working days once the payment reconciliationhappens at bank's end.
If the money still does not reflect in your bank account, contact us and we will get back to you
What customer needs to do?
Submit a ticket mentioning1. Name of the customer2. Email ID used at the time of placing order.3. Any reference number of transaction that you received from bank.