விற்பனை
2.4-inch SPI Interface 240×320 TFT Display Module
SKU: TES-EV0882777
2.4-inch SPI Interface 240×320 TFT Display Module
2.4-inch SPI Interface 240×320 TFT Display Module
The 2.4-inch TFT Display Module with SPI Interface, boasting a resolution of 240×320, has consistently remained a sought-after product within the DIY industry. LCD screens are indispensable components for a myriad of projects, providing essential visual output. Similarly, serial port modules enjoy popularity due to their minimal IO requirements and straightforward usage. This particular 2.4-inch TFT LCD combines these desirable features, offering compactness, a SPI interface, and seamless integration.
Pin Description:
- SDO: Serial clock output
- LED: 3.3V IO and Power Supply pin
- SCL: Serial clock input
- SDA / SDI: Serial data input
- DC: Data / Command selection
- RST: Reset, Low level active.
- CS: Chip Selection, Low level active
- GND: Ground
- VDD33: 3.3V Power Supply pin
- UTFT Support
Features:
- It is a 2.4″ SPI TFT LCD Screen Module
- 10pins interface.
- Not just an LCD break but include SD card (2GB),
- The LCD drive ic is ILI9341.
- It’s a 240 * 320 (resolution),
- 2.4-inch TFT LCD screen.
- The LCD has a wide viewing angle, the contrast is also very suitable.
- The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
- SD cards use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins.
2.4-inch SPI Interface 240×320 TFT Display Module
2.4-inch SPI Interface 240×320 TFT Display Module
The 2.4-inch TFT Display Module with SPI Interface, boasting a resolution of 240×320, has consistently remained a sought-after product within the DIY industry. LCD screens are indispensable components for a myriad of projects, providing essential visual output. Similarly, serial port modules enjoy popularity due to their minimal IO requirements and straightforward usage. This particular 2.4-inch TFT LCD combines these desirable features, offering compactness, a SPI interface, and seamless integration.
Pin Description:
- SDO: Serial clock output
- LED: 3.3V IO and Power Supply pin
- SCL: Serial clock input
- SDA / SDI: Serial data input
- DC: Data / Command selection
- RST: Reset, Low level active.
- CS: Chip Selection, Low level active
- GND: Ground
- VDD33: 3.3V Power Supply pin
- UTFT Support
Features:
- It is a 2.4″ SPI TFT LCD Screen Module
- 10pins interface.
- Not just an LCD break but include SD card (2GB),
- The LCD drive ic is ILI9341.
- It’s a 240 * 320 (resolution),
- 2.4-inch TFT LCD screen.
- The LCD has a wide viewing angle, the contrast is also very suitable.
- The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
- SD cards use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins.
