Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera V3/V1/V2/HQ (Pack of 2, 1 Set)

The Arducam CSI to HDMI Cable Extension Module is a specialized adapter solution designed to extend Raspberry Pi camera connectivity beyond standard ribbon cable distances, enabling direct HDMI output for real-time video streaming and display applications. Professional developers, robotics engineers, and embedded systems integrators utilize this module to overcome spatial constraints in camera module placement while maintaining signal integrity over extended cable runs. This product solves the critical challenge of integrating Raspberry Pi camera modules in projects where the camera must be positioned remotely from the compute module, requiring both physical separation and reliable video transmission without quality degradation.

Product Overview

The Arducam CSI to HDMI Cable Extension Module functions as an intelligent bridge between Raspberry Pi Camera Serial Interface (CSI) connectors and HDMI display outputs, incorporating a 15-pin 60mm Flexible Printed Circuit (FPC) cable that provides extended reach while maintaining full bandwidth compatibility. The module utilizes high-speed digital signal processing to convert native CSI camera data streams into HDMI-compatible video signals, supporting multiple camera generations including V3, V1, V2, and HQ variants. The 60mm FPC cable length provides approximately 2.4 inches of extension capability, ideal for mounting cameras in confined spaces, rotating platforms, or gimbal systems where standard 15cm ribbon cables prove insufficient. The module incorporates shielded connector design to minimize electromagnetic interference and maintain video signal fidelity across the extended cable run.

This extension module is engineered for plug-and-play operation without requiring additional software configuration or driver installation on Raspberry Pi systems running standard Raspbian or Raspberry Pi OS distributions. The dual-pack configuration includes two complete extension modules with matched FPC cables, enabling simultaneous dual-camera setups for stereo vision applications, multi-angle surveillance systems, or redundant camera installations. The module maintains full backward compatibility with existing Raspberry Pi camera ecosystem components while supporting modern V3 camera specifications including enhanced low-light performance and improved autofocus capabilities. Professional-grade construction ensures reliable operation across temperature ranges from 0 to 50 degrees Celsius, making this solution suitable for both indoor laboratory environments and outdoor embedded vision applications.

Key Specifications

Specification	Details
Product Type	CSI to HDMI Cable Extension Module
Brand	Arducam
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp
FPC Cable Length	60mm (2.4 inches)
FPC Connector Type	15-pin CSI compatible
Compatible Camera Modules	Raspberry Pi Camera V3, V1, V2, HQ
Output Interface	HDMI digital video signal
Operating Temperature Range	0 to 50 degrees Celsius
Pack Contents	2 extension modules with FPC cables (1 set)

Key Features

• Extended Camera Reach: 60mm FPC cable provides flexible extension capability for remote camera placement in robotics, gimbal systems, and confined mounting spaces while maintaining signal integrity
• Multi-Generation Compatibility: Supports Raspberry Pi Camera V3, V1, V2, and HQ modules with automatic detection and configuration, eliminating version-specific compatibility concerns
• Direct HDMI Output: Converts CSI camera signals to HDMI format for real-time display on monitors and projectors without requiring additional software processing or GPU resources
• Dual-Pack Configuration: Includes two complete extension modules enabling simultaneous dual-camera stereo vision applications, multi-angle surveillance, or redundant camera setups
• Shielded Cable Design: Electromagnetic shielding on FPC cable minimizes interference and maintains video quality across extended cable runs in electrically noisy environments
• Plug-and-Play Operation: Requires no driver installation or software configuration, functioning immediately with standard Raspberry Pi OS distributions

Applications and Use Cases

• Robotics and Autonomous Systems: Mount camera modules on robotic arms, drones, or mobile platforms where the camera must be positioned away from the main compute module, enabling real-time visual feedback for navigation and object detection
• Stereo Vision and 3D Imaging: Utilize the dual-module configuration to implement stereoscopic camera setups for depth sensing, 3D reconstruction, and machine vision applications requiring baseline separation between camera lenses
• Surveillance and Security Systems: Position cameras in remote locations within buildings or outdoor environments while maintaining central processing at a secure compute location, supporting multi-camera monitoring with extended cable runs
• Scientific Research and Medical Imaging: Deploy camera modules in laboratory equipment, microscopy systems, or medical diagnostic devices where spatial constraints require flexible cable routing and direct HDMI output for real-time observation
• Live Streaming and Content Creation: Connect camera modules to external displays or streaming equipment via HDMI, enabling content creators to monitor video quality during live broadcasts without relying on software preview windows
• Industrial Inspection and Quality Control: Mount cameras on production lines or inspection equipment with extended cable runs to central monitoring stations, supporting automated visual inspection systems with real-time HDMI output

How to Use

Installation of the Arducam CSI to HDMI Cable Extension Module requires careful attention to connector orientation and cable routing to ensure reliable operation. Begin by powering down your Raspberry Pi completely and disconnecting all external peripherals. Locate the Camera Serial Interface (CSI) connector on your Raspberry Pi motherboard, typically positioned between the USB and audio jack connectors. Gently lift the black retention clip on the CSI connector by approximately 2-3mm to release the existing camera ribbon cable. Insert the 15-pin FPC cable from the extension module into the CSI connector, ensuring the blue protective tape faces downward and the cable is fully seated, then press the black retention clip firmly downward until it clicks into locked position. Connect your Raspberry Pi camera module to the opposite end of the FPC cable using the same procedure, verifying that the camera module sits flush against the cable connector with no visible gaps.

Once the hardware installation is complete, route the 60mm FPC cable along your desired camera mounting path, using cable clips or adhesive-backed cable management solutions to secure the cable and prevent strain on the connectors. Connect an HDMI display or monitor to the HDMI output port on your Raspberry Pi. Power on your Raspberry Pi and allow the system to boot normally. The camera module should be automatically detected by Raspberry Pi OS without requiring additional configuration. To verify proper operation, open the Raspberry Pi Camera application or use the command line utility raspistill to capture test images. If the camera is not detected, power down the system and verify that both CSI connectors are fully seated and the retention clips are securely locked. For dual-camera stereo vision setups, repeat the installation procedure for the second extension module on the Compute Module IO Board or use a compatible multi-camera adapter board that supports simultaneous CSI connections.

Frequently Asked Questions

Is the 60mm FPC cable length sufficient for my application, or are longer extensions available?

The 60mm FPC cable provides adequate extension for most standard applications including robotic arms, gimbal systems, and confined mounting spaces. If you require longer cable runs exceeding 100mm, Arducam offers extended cable versions up to 200mm, which can be special ordered through our sales team. For cable lengths beyond 200mm, consider using active CSI to HDMI converter modules with separate shielded HDMI cables to maintain signal quality over greater distances.

Can I use both extension modules simultaneously for stereo vision applications on a single Raspberry Pi?

Yes, the dual-pack configuration is specifically designed for simultaneous dual-camera operation. However, standard Raspberry Pi boards feature only one CSI connector. To utilize both modules, you will need a Compute Module with dual CSI ports or a compatible multi-camera adapter board such as the Arducam Dual CSI Adapter. The Compute Module 4 supports dual camera connections through its two CSI connectors, enabling simultaneous stereo vision and 3D imaging applications.

What is the maximum video resolution and frame rate supported by this extension module?

The Arducam CSI to HDMI Cable Extension Module supports full resolution output from all compatible camera modules. Raspberry Pi Camera V3 supports up to 12MP still images and 1080p at 60fps video, while the HQ module supports up to 12.3MP stills and 1080p at 60fps video. The extension module does not limit resolution or frame rate, passing through the native capabilities of your connected camera module without degradation. HDMI output bandwidth supports up to 1080p 60fps without quality loss across the 60mm cable extension.

Will the FPC cable work with other Raspberry Pi models like Pi Zero or Pi 5?

The 15-pin CSI connector standard is consistent across Raspberry Pi models including Pi 4, Pi 3, Pi Zero, and the new Pi 5. The Arducam extension module is fully compatible with all these models. However, verify that your specific Raspberry Pi variant includes a CSI camera connector, as some older or specialized boards may use different connector types. The Pi Zero and Pi Zero W feature a smaller 22mm CSI connector that requires a separate micro CSI to standard CSI adapter cable for compatibility with this module.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day

Buy Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera V3/V1/V2/HQ (Pack of 2, 1 Set) Online in India

Purchase the Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera V3/V1/V2/HQ (Pack of 2, 1 Set) online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.