{"product_id":"eft-arm-lock-cap-φ35-4pcs-compatible-with-e610p-35mm-30mm","title":"EFT Arm Lock Cap φ35\/4pcs Compatible with E610P 35mm\/30mm","description":"\u003cmeta name=\"description\" content=\"Buy EFT Arm Lock Cap φ35\/4pcs Compatible with E610P 35mm\/30mm online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eEFT Arm Lock Cap φ35\/4pcs Compatible with E610P 35mm\/30mm\u003c\/h1\u003e\n\n\u003cp\u003eThe EFT Arm Lock Cap φ35 is a precision fastening component designed for the EFT E610P agricultural drone platform, providing secure mechanical locking for 35mm and 30mm arm assemblies. These caps are essential structural components used by professional drone operators, agricultural technicians, and industrial UAV specialists to maintain frame integrity during flight operations and transport. This product solves the critical problem of arm assembly loosening during vibration and high-stress maneuvers, ensuring consistent flight performance and safety in commercial drone applications.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe EFT Arm Lock Cap φ35 functions as a mechanical retention system that secures the arm joints of the E610P frame through a threaded locking mechanism. The design utilizes a tapered cap geometry that compresses the arm connection point, creating a friction-lock assembly that resists vibration-induced loosening. The φ35 diameter specification matches the outer diameter of the E610P arm tubes, allowing for direct mounting without adapters. The set of four caps provides complete coverage for the quadcopter frame, with each cap engineered to withstand the dynamic stress loads experienced during takeoff, sustained flight, and landing phases. The locking mechanism operates on a simple screw-down principle where rotational torque creates axial compression, distributing load evenly across the arm joint interface.\u003c\/p\u003e\n\n\u003cp\u003eThis component is manufactured to precise tolerances to ensure consistent fit across all E610P platforms and compatible variants. The material composition provides corrosion resistance for outdoor agricultural operations, while the mechanical design eliminates the need for adhesive or secondary locking methods. Professional operators value this product for its reliability in maintaining structural rigidity across extended flight missions, particularly in applications involving payload variations and high-altitude operations where frame stress increases significantly. The four-piece configuration ensures symmetrical load distribution across all four arms of the quadcopter platform.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eArm Lock Cap Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEFT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003eφ35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eE610P 35mm\/30mm Arm Tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 pieces per set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking Mechanism\u003c\/td\u003e\n\u003ctd\u003eThreaded Compression Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum Alloy with Corrosion Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003eStandard Metric Threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision φ35mm diameter design ensures perfect fit with E610P arm tube assemblies, eliminating wobble and maintaining frame alignment during high-speed maneuvers\u003c\/li\u003e\n\u003cli\u003eThreaded compression locking mechanism provides vibration-resistant fastening that maintains structural integrity across extended flight operations and rough landing conditions\u003c\/li\u003e\n\u003cli\u003eSet of four caps enables complete quadcopter frame assembly with symmetrical load distribution across all four arms for balanced flight dynamics\u003c\/li\u003e\n\u003cli\u003eAluminum alloy construction with corrosion-resistant coating suitable for agricultural and outdoor industrial drone operations in humid and salt-spray environments\u003c\/li\u003e\n\u003cli\u003eSimple installation procedure requiring only standard metric wrench tools, reducing assembly time for field technicians and operators\u003c\/li\u003e\n\u003cli\u003eCompatible with both 35mm and 30mm arm tube variants of the E610P platform, providing flexibility across different frame configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAgricultural drone operations for precision crop spraying and monitoring, where frame stability is critical for accurate payload delivery and consistent flight paths over extended mission durations\u003c\/li\u003e\n\u003cli\u003eIndustrial inspection missions requiring sustained altitude hold and precise positioning, where loose arm assemblies could cause drift and compromise data collection accuracy\u003c\/li\u003e\n\u003cli\u003eCommercial delivery operations using E610P platforms, where frame integrity directly impacts payload safety and flight reliability during multi-hour operational cycles\u003c\/li\u003e\n\u003cli\u003eResearch and mapping applications involving heavy sensor payloads, where arm joint compression prevents structural flex that could introduce measurement errors in photogrammetry and LiDAR data\u003c\/li\u003e\n\u003cli\u003eProfessional training and certification programs for drone operators, where reliable frame assembly ensures consistent aircraft behavior during skill development exercises\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eBegin the installation process by ensuring the E610P frame is completely disassembled with all four arm tubes removed from the central body. Inspect each arm tube connection point for debris or damage, cleaning with a dry cloth if necessary. Position the first arm lock cap over the arm joint, aligning the threaded interior with the corresponding threaded post on the frame body. Hand-tighten the cap initially to ensure proper thread engagement, then use a metric wrench to apply firm rotational torque until the cap seats fully against the arm tube. The proper installation creates a slight compression at the joint interface without excessive force that could strip threads or deform the aluminum tube.\u003c\/p\u003e\n\n\u003cp\u003eRepeat this process for all four arm assemblies, maintaining consistent torque application across all caps to ensure balanced frame geometry. After installation, gently flex each arm to verify the joint is secure and shows no rotational movement. Perform a visual inspection to confirm all four caps are fully seated and aligned symmetrically. For field maintenance, periodically check cap tightness after approximately 10 flight hours or following rough landings, as vibration can gradually loosen mechanical fasteners. Store replacement caps in a dry environment to prevent corrosion, and maintain a spare set for field operations to minimize downtime if a cap becomes damaged.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat torque specification should I apply when installing the arm lock caps?\u003c\/summary\u003e\n\u003cp\u003eApply firm hand-tightness followed by approximately one-quarter additional turn with a wrench. The exact torque specification depends on thread condition and material, but typically ranges from 2.5 to 3.5 Newton-meters for aluminum alloy caps. Over-tightening can strip threads or deform the arm tube, while under-tightening allows vibration-induced loosening. If you have a torque wrench, consult the E610P manual for the precise specification, as this varies by frame revision.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre these caps compatible with other EFT drone models besides the E610P?\u003c\/summary\u003e\n\u003cp\u003eThese caps are specifically engineered for the E610P platform with φ35mm arm tube specifications. While they may physically fit other EFT models with similar arm diameters, we recommend verifying compatibility with your specific aircraft model before installation. Using non-compatible components can result in improper fit, structural failure, or safety hazards. Contact our technical support team with your aircraft model number for definitive compatibility confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should I replace the arm lock caps?\u003c\/summary\u003e\n\u003cp\u003eArm lock caps are durable components designed for extended service life when properly maintained. Replace them only if you observe thread stripping, visible cracks, corrosion damage, or inability to achieve secure fastening. Under normal operating conditions with proper maintenance, these caps should provide service for hundreds of flight hours. Inspect caps during routine frame maintenance, and replace any that show signs of wear or damage to maintain flight safety and structural integrity.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I use thread-locking compound with these caps for additional security?\u003c\/summary\u003e\n\u003cp\u003eThread-locking compounds are generally not recommended for these mechanical caps as they can complicate future disassembly and maintenance. The compression-lock design is engineered to provide sufficient vibration resistance without chemical adhesives. However, if you operate in extremely high-vibration environments or perform frequent arm assembly cycles, a removable thread-locker like medium-strength Loctite can be applied sparingly to the threads. Always use removable formulations, never permanent compounds, to preserve future serviceability.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy EFT Arm Lock Cap φ35\/4pcs Compatible with E610P 35mm\/30mm Online in India\u003c\/h2\u003e\n\u003cp\u003ePurchase the \u003cstrong\u003eEFT Arm Lock Cap φ35\/4pcs Compatible with E610P 35mm\/30mm\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003eEFT Arm Lock Cap φ35\/4pcs Compatible with E610P 35mm\/30mm\u003c\/strong\u003e with fast shipping and expert support.\u003c\/p\u003e\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":44005462114467,"sku":"TES-EVN1694","price":2460.26,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/EFT-Arm-Lock-Cap-2-314x252.jpg?v=1707827314","url":"https:\/\/www.theengineerstore.in\/te\/products\/eft-arm-lock-cap-%cf%8635-4pcs-compatible-with-e610p-35mm-30mm","provider":"The Engineer Store","version":"1.0","type":"link"}