MY1016 24V 250W DC Motor High Speeds Small Brush Motor For ebike e-bike

The MY1016 is a compact 24V 250W brushed DC motor specifically engineered for electric bicycle and e-bike propulsion systems, delivering high-speed performance in a lightweight form factor. Professional e-bike manufacturers, DIY electric vehicle enthusiasts, and electric scooter builders rely on this motor for its reliable torque delivery and consistent speed characteristics across variable load conditions. This motor solves the critical challenge of achieving efficient, maintenance-friendly power delivery in space-constrained e-mobility applications while maintaining cost-effectiveness and thermal stability.

Product Overview

The MY1016 operates on the principle of electromagnetic induction within a brushed DC motor architecture, where current flowing through the armature windings creates a magnetic field that interacts with permanent magnets to produce rotational force. The brushed commutation system ensures smooth power delivery across the entire RPM range, making it ideal for direct-drive or geared e-bike hub applications. This motor's design prioritizes efficiency at the 24V nominal voltage, delivering 250W continuous output with minimal heat generation, allowing extended ride times without thermal throttling or performance degradation.

What distinguishes the MY1016 from competing models is its optimized brush geometry and armature winding configuration, which reduces electrical noise and extends brush life to over 500 operating hours under normal e-bike usage patterns. The compact cylindrical housing integrates seamlessly into standard e-bike hub assemblies, while the high-speed capability of this motor makes it suitable for both pedal-assist systems requiring rapid response and throttle-controlled applications demanding consistent power delivery across varying terrain and load conditions.

Key Specifications

Specification	Details
Product Type	Brushed DC Motor for E-bikes
Brand	MY Series Motor
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp
Rated Voltage	24V DC
Rated Power	250W Continuous
Maximum RPM	2800-3200 RPM (no-load)
Rated Current	10.4A at rated power
Motor Type	Permanent Magnet Brushed DC
Mounting	Standard e-bike hub compatible

Key Features

• High-speed brushed DC motor delivering 250W continuous power output with peak efficiency at 24V nominal voltage for extended range e-bike applications
• Compact lightweight cylindrical design measuring approximately 110mm length and 52mm diameter, enabling direct integration into standard e-bike front or rear hub assemblies without frame modifications
• Optimized brush and commutator system reducing electrical noise to below 75dB and extending maintenance intervals beyond 500 operating hours compared to 300 hours in standard motors
• Low internal resistance windings generating minimal heat dissipation, allowing continuous operation in ambient temperatures up to 40 degrees Celsius without thermal protection activation
• Permanent magnet rotor configuration providing instant torque response ideal for pedal-assist systems requiring rapid power modulation and smooth acceleration from standstill
• Sealed bearing design with IP54 rating protecting internal components from moisture ingress during wet weather riding conditions and water splash from puddles and rain

Applications and Use Cases

• Direct-drive e-bike hub motor applications where the MY1016 replaces traditional mechanical gearboxes, providing smooth single-speed power delivery for urban commuting with integrated wheel rim compatibility
• Pedal-assist electric bicycles requiring rapid response throttle modulation, where the motor's high-speed characteristics enable seamless power blending with human pedaling force across variable cadence ranges
• Electric scooter and micro-mobility platforms utilizing 24V battery systems, where the 250W output delivers adequate acceleration for 20-30 km/h cruising speeds with extended battery runtime
• DIY electric vehicle projects including cargo e-bikes and adapted tricycles, where the compact form factor and standard mounting interfaces allow integration without specialized fabrication or custom frame engineering
• Off-road electric mountain bikes requiring consistent torque delivery across uneven terrain, where brushed commutation provides stable power output without the efficiency losses of brushless systems at variable load conditions

How to Use

Installation of the MY1016 requires mechanical integration into your e-bike hub assembly using the standard mounting flange and axle attachment points. Ensure the motor shaft aligns concentrically with your wheel rim to prevent vibration and premature bearing wear. Connect the motor leads to your 24V battery management system through an appropriate motor controller rated for minimum 15A continuous current capacity, with proper fusing at 20A to protect against short-circuit conditions. The three-wire connection typically comprises positive supply, negative return, and optional speed control signal for variable throttle or pedal-assist modulation.

For optimal performance, configure your motor controller with current limiting set to 12A continuous and 15A peak to prevent thermal stress during rapid acceleration or climbing steep inclines. Verify brush contact pressure during initial assembly by checking for smooth rotation without grinding noise or excessive drag. Perform a no-load test at 24V to confirm motor speed falls within the 2800-3200 RPM specification before load testing. During initial operation, limit power application to 50 percent for the first 50 kilometers to allow brush bedding-in and proper commutator surface conditioning, which will maximize brush life and minimize electrical noise.

Frequently Asked Questions

What is the maximum continuous current the MY1016 can safely handle without thermal shutdown?

The MY1016 is rated for 10.4A continuous current at 24V nominal voltage, delivering 250W output. Operating at currents exceeding 12A for extended periods will cause internal winding temperature to rise above 80 degrees Celsius, potentially damaging insulation and reducing motor lifespan. Your motor controller must implement current limiting to protect the motor, with a recommended threshold of 12A continuous and 15A peak for brief acceleration pulses.

Can the MY1016 be used with 36V or 48V battery systems?

The MY1016 is specifically designed and tested for 24V DC operation only. Applying 36V or 48V will cause the motor to exceed its rated current draw significantly, generating excessive heat and permanently damaging the windings within minutes. If you require higher voltage operation, you must select a motor specifically rated for your battery voltage, such as the MY1020 series for 36V applications or MY1030 for 48V systems.

How often should brushes be inspected and replaced in the MY1016?

Under normal e-bike usage averaging 20-30 kilometers daily, brushes typically require inspection after 500 operating hours, approximately 12-18 months of regular riding. Visual inspection through the motor's access port will show brush wear; replace brushes when they reduce to approximately 3mm length. Worn brushes produce increased electrical noise, reduced power output, and visible sparking at the commutator. Replacement brushes are available as service kits and can be installed without removing the motor from the bike frame.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy MY1016 24V 250W DC Motor High Speeds Small Brush Motor For ebike e-bike Online in India

Purchase the MY1016 24V 250W DC Motor High Speeds Small Brush Motor For ebike e-bike online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on MY1016 24V 250W DC Motor High Speeds Small Brush Motor For ebike e-bike with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.