{"product_id":"ad9850-dds-signal-generator-module","title":"AD9850 DDS Signal Generator Module","description":"\u003cmeta name=\"description\" content=\"Buy AD9850 DDS Signal Generator Module online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eAD9850 DDS Signal Generator Module\u003c\/h1\u003e\n\n\u003cp\u003eThe AD9850 DDS Signal Generator Module is a Direct Digital Synthesis (DDS) based waveform generator capable of producing high-precision sine, square, and triangle waves from DC to 40 MHz with exceptional frequency resolution. Electronics engineers, RF technicians, and hobbyists use this module for circuit testing, frequency calibration, signal analysis, and prototype development. This module solves the critical problem of generating stable, programmable test signals without requiring expensive benchtop function generators, making it ideal for educational labs, repair workshops, and embedded system development.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe AD9850 DDS Signal Generator Module leverages the Analog Devices AD9850 integrated circuit, a highly integrated DDS synthesizer that generates arbitrary waveforms with 32-bit frequency tuning resolution. The DDS architecture works by accumulating phase values at a high clock rate and converting the digital phase information into analog signals through a precision DAC (Digital-to-Analog Converter). This approach enables frequency resolution down to 0.1 Hz across the entire 40 MHz bandwidth, making it superior to traditional oscillator-based function generators. The module includes an onboard 125 MHz clock oscillator, output amplification stage, and serial control interface for easy integration with microcontrollers and computers.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes the AD9850 module is its combination of affordability, compact form factor, and remarkable frequency stability. Unlike analog function generators that drift with temperature, the DDS architecture maintains phase coherence and frequency accuracy within ±50 ppm. The module features independent amplitude control, phase offset capability, and simultaneous dual-output capability (sine and square waves). The serial SPI interface allows real-time frequency and amplitude adjustment from Arduino, Raspberry Pi, or PC-based control software, making it exceptionally versatile for automated testing environments and educational demonstrations.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDDS Signal Generator Module with AD9850 IC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAnalog Devices (AD9850 IC) \/ Generic Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003e0 Hz to 40 MHz continuous tuning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Resolution\u003c\/td\u003e\n\u003ctd\u003e0.1 Hz (32-bit DDS accumulator)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Waveforms\u003c\/td\u003e\n\u003ctd\u003eSine, Square, Triangle waves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Amplitude\u003c\/td\u003e\n\u003ctd\u003e0-600 mV peak adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClock Frequency\u003c\/td\u003e\n\u003ctd\u003e125 MHz onboard oscillator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Interface\u003c\/td\u003e\n\u003ctd\u003eSerial SPI (3-wire or 4-wire mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Impedance\u003c\/td\u003e\n\u003ctd\u003e50 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e5V DC (USB or external)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Dimensions\u003c\/td\u003e\n\u003ctd\u003eApproximately 50mm x 30mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eUltra-Fine Frequency Resolution: 0.1 Hz tuning resolution across 40 MHz range enables precise frequency calibration and signal generation for narrow-band testing applications\u003c\/li\u003e\n\u003cli\u003eMultiple Output Waveforms: Simultaneous sine and square wave outputs with independent amplitude control allow flexible test signal generation without additional modules\u003c\/li\u003e\n\u003cli\u003eMicrocontroller Compatible: SPI serial interface integrates seamlessly with Arduino, STM32, PIC, and Raspberry Pi for automated signal generation and frequency sweeping\u003c\/li\u003e\n\u003cli\u003eCompact and Affordable: Miniaturized PCB design with integrated power management delivers professional DDS functionality at a fraction of benchtop equipment cost\u003c\/li\u003e\n\u003cli\u003ePhase Offset Control: Programmable phase offset capability enables phase-locked loop applications and phase-sensitive measurements\u003c\/li\u003e\n\u003cli\u003eStable Onboard Clock: 125 MHz temperature-compensated oscillator maintains frequency accuracy within ±50 ppm without external reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eRF and Microwave Testing: Generate precise test signals for frequency response measurements, filter characterization, and impedance matching verification in communication circuits\u003c\/li\u003e\n\u003cli\u003eAudio Signal Processing: Create calibrated sine waves and frequency sweeps for audio equipment testing, speaker response analysis, and acoustic measurement in educational labs\u003c\/li\u003e\n\u003cli\u003ePhase-Locked Loop Development: Use as a programmable reference oscillator for PLL circuit design, frequency synthesis, and clock recovery system prototyping\u003c\/li\u003e\n\u003cli\u003eEducational Demonstrations: Teach signal generation principles, Fourier analysis, and waveform manipulation in electronics and physics laboratories with real-time frequency control\u003c\/li\u003e\n\u003cli\u003eSensor Calibration: Generate precise frequency standards for ultrasonic sensor calibration, resonance detection, and vibration analysis applications\u003c\/li\u003e\n\u003cli\u003eEmbedded System Testing: Integrate into automated test equipment for component characterization, circuit validation, and production-line quality assurance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eTo begin using the AD9850 DDS Signal Generator Module, first establish power supply connection: connect the 5V positive to the VCC pin and ground to GND. The module accepts 5V from USB, Arduino power pin, or external regulated supply. Next, establish serial communication by connecting the SPI pins (CLK, DATA, FQ_UD) to your microcontroller. The FQ_UD (Frequency Update) pin latches new frequency values into the DDS accumulator. Configure your microcontroller to transmit 40-bit control words via SPI: the first 8 bits select the control function, and the remaining 32 bits contain the frequency tuning word. Calculate the frequency tuning word using the formula: Tuning Word = (Desired Frequency × 2^32) \/ 125 MHz. For example, to generate 1 kHz, the tuning word is approximately 34,359,738.\u003c\/p\u003e\n\n\u003cp\u003eConnect the sine wave output (SIN OUT) or square wave output (SQU OUT) to your measurement equipment or circuit under test using 50-ohm coaxial cable for frequencies above 1 MHz. Use the onboard potentiometer or software commands to adjust output amplitude to the required level. For Arduino integration, use SPI libraries to send control bytes, toggling FQ_UD high then low to latch the frequency value. The module updates frequency in real-time, enabling frequency sweep applications and dynamic signal generation. For best results, keep signal cables short and shielded when operating above 10 MHz, and ensure your power supply provides stable 5V with minimal ripple. The module generates heat during continuous operation; ensure adequate ventilation or add a small heatsink if operating for extended periods.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the maximum output frequency and can it generate frequencies above 40 MHz?\u003c\/summary\u003e\n\u003cp\u003eThe AD9850 module generates frequencies up to 40 MHz maximum. The theoretical Nyquist limit is half the 125 MHz clock frequency (62.5 MHz), but the AD9850 IC specification limits practical output to 40 MHz for acceptable signal quality. Output amplitude and harmonic content degrade at frequencies approaching the Nyquist limit. For applications requiring frequencies above 40 MHz, consider the AD9851 module which operates at 180 MHz clock rate, or use external frequency multiplier circuits.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I control the AD9850 module from Arduino and what libraries are available?\u003c\/summary\u003e\n\u003cp\u003eControl the AD9850 via SPI protocol by connecting three pins from Arduino: CLK to Arduino SPI clock, DATA to Arduino SPI MOSI, and FQ_UD to any digital output pin. The Arduino SPI library handles clock and data transmission; you only need to manually control FQ_UD. Multiple Arduino sketches and libraries are available on GitHub specifically for AD9850 modules. The basic approach involves calculating the 32-bit frequency tuning word, transmitting it via SPI in little-endian format (LSB first), then pulsing FQ_UD to latch the value. The frequency updates within microseconds, enabling real-time frequency sweeping for frequency response analysis.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the frequency accuracy and drift characteristics over temperature?\u003c\/summary\u003e\n\u003cp\u003eThe AD9850 module maintains frequency accuracy within ±50 ppm (parts per million) across the operating temperature range of 0°C to 70°C. This means at 1 MHz, the frequency error is approximately ±50 Hz maximum. The onboard 125 MHz oscillator includes temperature compensation circuitry to minimize frequency drift. For applications requiring higher accuracy, an external precision 125 MHz reference oscillator can be connected to the clock input pin, achieving accuracy limited only by the external reference. The DDS architecture itself is inherently stable since it counts digital clock cycles; drift occurs only from the clock oscillator itself.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan the AD9850 module generate phase-modulated or frequency-modulated signals?\u003c\/summary\u003e\n\u003cp\u003eYes, the AD9850 supports both frequency modulation (FM) and phase modulation (PM) through real-time tuning word updates. By continuously updating the frequency control word at audio rates (typically 20 Hz to 20 kHz), you can frequency-modulate the carrier. Similarly, the phase offset bits in the control word enable phase modulation. The SPI interface update rate (typically 1-10 microseconds per update) allows modulation bandwidths up to 100 kHz. This makes the module suitable for FSK (Frequency Shift Keying) modulation, chirp signal generation, and phase-locked loop applications. Arduino sketches can implement real-time modulation by calculating new tuning words based on analog input values.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy AD9850 DDS Signal Generator Module Online in India\u003c\/h2\u003e\n\n\u003cp\u003ePurchase the\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":43854071595171,"sku":"TES-EV0882773","price":1416.16,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/AD9850-DDS-Signal-Generator-Module-5-314x252.jpg?v=1704200732","url":"https:\/\/www.theengineerstore.in\/zh-hans\/products\/ad9850-dds-signal-generator-module","provider":"The Engineer Store","version":"1.0","type":"link"}