{"product_id":"cytron-dual-channel-10a-motor-driver-uno-robot-controller","title":"Cytron Dual channel 10A Motor Driver UNO Robot Controller","description":"\u003cmeta name=\"description\" content=\"Buy Cytron Dual channel 10A Motor Driver UNO Robot Controller online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eCytron Dual channel 10A Motor Driver UNO Robot Controller\u003c\/h1\u003e\n\n\u003cp\u003eThe Cytron Dual channel 10A Motor Driver is a compact shield module designed specifically for Arduino UNO microcontrollers, enabling independent control of two DC motors with continuous current ratings up to 10A per channel. Roboticists, hobbyists, and embedded systems engineers use this controller to build autonomous mobile robots, line-following vehicles, and obstacle-avoidance systems that require precise bidirectional motor control. This driver eliminates the complexity of discrete H-bridge circuits by providing an integrated solution with built-in PWM support, direction control, and thermal protection, solving the critical problem of safely interfacing high-current motors with low-power microcontroller GPIO pins.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe Cytron Dual channel 10A Motor Driver operates on the principle of H-bridge motor control, utilizing dual MOSFET bridges to enable forward, reverse, and variable-speed operation of two independent DC motors simultaneously. The module features a stackable Arduino shield form factor that directly interfaces with Arduino UNO, Mega, and compatible boards without requiring external wiring. Each channel supports PWM input for speed control (0-255 resolution) and direction control via dedicated GPIO pins, allowing full programmability through Arduino IDE. The onboard voltage regulator provides stable 5V logic supply, while the motor power input accepts 6V to 12V DC, making it compatible with standard battery packs used in robotics projects.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes this Cytron controller is its integrated thermal management system with automatic current limiting that protects against motor stalling and short-circuit conditions. The dual-channel architecture enables differential speed control for steering and turning maneuvers, essential for mobile robot navigation. Built-in protection diodes prevent back-EMF damage during rapid motor deceleration, while the compact PCB design minimizes weight and power consumption overhead. The shield includes status LEDs for each channel, providing real-time visual feedback on motor operation and current flow direction, invaluable for debugging and system verification during development.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDual Channel DC Motor Driver Shield for Arduino\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCytron Technologies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Current Per Channel\u003c\/td\u003e\n\u003ctd\u003e10A maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Current Per Channel\u003c\/td\u003e\n\u003ctd\u003e15A (short duration)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e6V to 12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e5V (onboard regulator)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Interface\u003c\/td\u003e\n\u003ctd\u003ePWM speed control and digital direction pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Features\u003c\/td\u003e\n\u003ctd\u003eThermal shutdown, current limiting, back-EMF protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eDual Independent Motor Channels: Control two DC motors separately with individual PWM speed regulation (0-255) and directional control, enabling complex movement patterns and steering algorithms\u003c\/li\u003e\n\u003cli\u003eArduino Shield Compatible: Stackable design fits directly on Arduino UNO, Mega, and compatible boards with no soldering required, reducing assembly time and integration errors\u003c\/li\u003e\n\u003cli\u003eHigh Current Capacity: 10A continuous per channel supports medium to large DC motors commonly used in robot chassis and mobile platforms without external amplification\u003c\/li\u003e\n\u003cli\u003eIntegrated Thermal Protection: Automatic current limiting and thermal shutdown prevents damage during motor stalling, locked rotor conditions, or sustained overload scenarios\u003c\/li\u003e\n\u003cli\u003eVisual Status Indicators: Onboard LED indicators for each channel display motor direction and operational status, providing immediate feedback during testing and troubleshooting\u003c\/li\u003e\n\u003cli\u003eBack-EMF Protection: Built-in protection diodes suppress voltage spikes generated during motor deceleration and direction reversal, protecting microcontroller pins from damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eLine-Following Robots: Implement differential speed control between left and right motors for precise path tracking using IR sensors, requiring independent PWM modulation on each channel\u003c\/li\u003e\n\u003cli\u003eObstacle Avoidance Systems: Enable rapid motor direction reversal and speed adjustment for autonomous navigation in robotics competitions and educational projects\u003c\/li\u003e\n\u003cli\u003eMobile Robot Platforms: Drive two-wheel or four-wheel robot chassis with coordinated motor control for forward, backward, and turning maneuvers in warehouse automation and surveillance applications\u003c\/li\u003e\n\u003cli\u003eRobot Arm Actuators: Control multiple joint motors in robotic manipulators where independent torque and speed regulation is required for precise positioning and load handling\u003c\/li\u003e\n\u003cli\u003eEducational Robotics Kits: Simplify motor control implementation in STEM curricula and robotics clubs, reducing complexity and enabling students to focus on algorithm development\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eTo set up the Cytron Dual channel 10A Motor Driver, first stack the shield directly onto your Arduino UNO microcontroller, ensuring proper alignment of the pin headers. Connect your motor power supply (6-12V DC) to the motor power input terminals, and connect your two DC motors to the Motor A and Motor B output terminals, observing correct polarity for forward rotation. The module automatically derives 5V logic supply from the onboard regulator, so no additional power connections are needed for the Arduino logic circuit.\u003c\/p\u003e\n\n\u003cp\u003eIn your Arduino sketch, configure the PWM pins (typically pins 5 and 6 for speed control) and direction pins (typically pins 8 and 9) as outputs. Use analogWrite() function to set motor speed (0-255 where 0 is stopped and 255 is full speed) and digitalWrite() to control direction. For example, to run Motor A forward at 75% speed, use analogWrite(5, 191) and digitalWrite(8, HIGH). The onboard LEDs will illuminate to indicate motor direction. Always start with low speed values during testing to verify correct motor polarity and controller operation before running at full power.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the maximum current capacity and can it handle stalled motors?\u003c\/summary\u003e\n\u003cp\u003eEach channel supports 10A continuous current and 15A peak current for short durations. The integrated thermal protection system includes current limiting that automatically reduces power if a motor stalls or becomes locked, preventing damage to the driver. However, prolonged stalling should be avoided as it generates excessive heat. If your application involves frequent stalling, ensure adequate cooling and consider using lower voltage supplies to reduce current draw.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use this driver with motors rated above 12V?\u003c\/summary\u003e\n\u003cp\u003eNo, the Cytron Dual channel 10A Motor Driver is specifically designed for 6V to 12V DC motors. Using higher voltages will damage the onboard voltage regulator and MOSFET components. If you need to drive higher voltage motors, you must use a different motor driver rated for your voltage requirements. Always verify your motor's rated voltage before connecting to this shield.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I control the motor speed and direction independently?\u003c\/summary\u003e\n\u003cp\u003eSpeed control is achieved using PWM (Pulse Width Modulation) on the speed pins through the analogWrite() function with values 0-255. Direction control uses digital pins set to HIGH or LOW. For Motor A, typically pin 5 controls speed and pin 8 controls direction. By varying the PWM value independently for each motor, you can achieve differential speed control for turning and steering maneuvers without changing direction.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat happens if I connect the motors with reversed polarity?\u003c\/summary\u003e\n\u003cp\u003eReversed polarity will cause the motor to spin in the opposite direction from what you programmed. This is not harmful to the driver, but your robot will move in unexpected directions. Simply reverse the motor connections or invert the direction logic in your code. The onboard LEDs will help you verify correct rotation direction before finalizing your connections.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy Cytron Dual channel 10A Motor Driver UNO Robot Controller Online in India\u003c\/h2\u003e\n\n\u003cp\u003ePurchase the \u003cstrong\u003eCytron Dual channel 10A Motor Driver UNO Robot Controller\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003eCytron Dual channel 10A Motor Driver UNO Robot Controller\u003c\/strong\u003e with fast shipping and expert support.\u003c\/p\u003e\n\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":44005391597731,"sku":"TES-EVN473","price":3297.45,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/uno-robot-controller-314x252.jpg?v=1707824631","url":"https:\/\/www.theengineerstore.in\/zh-hans\/products\/cytron-dual-channel-10a-motor-driver-uno-robot-controller","provider":"The Engineer Store","version":"1.0","type":"link"}