{"product_id":"dys-30amp-mini-opto-blheli-multi-rotor-electronic-speed-controller-blheli-firmware-sn30a-original","title":"DYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original)","description":"\u003cmeta name=\"description\" content=\"Buy DYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original) online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eDYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original)\u003c\/h1\u003e\n\n\u003cp\u003eThe DYS 30Amp Mini Opto BLHeli Electronic Speed Controller is a precision brushless motor controller designed for multi-rotor UAVs, quadcopters, and racing drones requiring reliable commutation and smooth throttle response. Professional drone pilots, FPV racing enthusiasts, and commercial UAV operators depend on this ESC for its low-noise operation, optoisolated input design, and BLHeli firmware compatibility that enables advanced motor tuning and telemetry feedback. This controller solves the critical problem of efficient motor speed regulation while minimizing electromagnetic interference and voltage ripple that can degrade flight stability and camera gimbal performance in demanding aerial applications.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe DYS 30Amp Mini Opto BLHeli ESC utilizes optoisolated signal input architecture, which completely decouples the PWM signal from the high-current power stage through optical isolation. This design eliminates ground loop noise and prevents voltage spikes from the main power bus from corrupting the control signal, resulting in cleaner commutation and more precise motor speed control. The integrated BLHeli firmware provides open-source programmability, allowing users to customize acceleration profiles, damping ratios, and motor rotation direction through standard ESC programming interfaces without requiring external hardware programmers.\u003c\/p\u003e\n\n\u003cp\u003eThe SN30A variant features a compact form factor optimized for weight-sensitive applications while maintaining robust thermal management through direct PCB copper traces and efficient MOSFETs rated for continuous 30-ampere operation. The mini opto design incorporates a dedicated optoisolator IC that maintains signal integrity across voltage transients exceeding 1000V\/microsecond, critical for maintaining stable flight control authority during rapid throttle changes and aggressive maneuvers. The BLHeli firmware implementation supports multiple motor timing modes, allowing operators to tune the ESC for maximum efficiency across varying load conditions from static hover to high-speed racing.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eOptoisolated Brushless Electronic Speed Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDYS (Dongyang Shen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSN30A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Current Rating\u003c\/td\u003e\n\u003ctd\u003e30 Amperes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst Current Rating\u003c\/td\u003e\n\u003ctd\u003e40 Amperes (10 seconds maximum)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e2S to 4S LiPo (7.4V to 16.8V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBEC Output\u003c\/td\u003e\n\u003ctd\u003e5V \/ 2A regulated linear BEC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Input\u003c\/td\u003e\n\u003ctd\u003eOptoisolated PWM (1000-2000 microseconds)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eBLHeli (programmable via SimonK or BLHeli Suite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e36mm x 20mm x 10mm (mini compact form factor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 8-9 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eOptoisolated Input Design: Complete electrical isolation between signal and power stages eliminates ground loop noise and prevents EMI coupling into flight control systems, critical for maintaining gyroscope and accelerometer accuracy in multi-rotor platforms\u003c\/li\u003e\n\u003cli\u003eBLHeli Firmware Compatibility: Open-source firmware platform enables customization of motor timing, acceleration ramps, and damping characteristics through standard ESC programming tools without requiring EEPROM writers\u003c\/li\u003e\n\u003cli\u003eCompact Mini Form Factor: Ultra-lightweight 8-9 gram design with minimal PCB footprint optimized for weight-constrained quadcopter builds while maintaining full 30-ampere continuous rating\u003c\/li\u003e\n\u003cli\u003eRegulated 5V BEC Output: Integrated 2-ampere linear BEC provides stable 5V power for receiver, flight controller, and servo systems with built-in reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eEfficient MOSFET Design: Low RDS(on) N-channel MOSFETs minimize heat generation and voltage drop, extending flight time and reducing thermal stress on battery connectors\u003c\/li\u003e\n\u003cli\u003eWide Input Voltage Range: Supports 2S through 4S LiPo battery configurations, enabling use across diverse multi-rotor platforms from micro racers to larger camera platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eFPV Racing Drones: Optoisolated design eliminates signal noise during high-frequency throttle inputs at 5000+ RPM, maintaining precise motor control during aggressive acrobatic maneuvers and gate racing scenarios\u003c\/li\u003e\n\u003cli\u003eAerial Photography Platforms: Smooth commutation and low electromagnetic interference prevent gimbal vibration and camera jitter, critical for producing broadcast-quality video from quadcopter platforms\u003c\/li\u003e\n\u003cli\u003eCommercial UAV Operations: Reliable BLHeli firmware and optoisolated architecture provide the stability required for autonomous flight missions, payload delivery, and inspection applications in industrial settings\u003c\/li\u003e\n\u003cli\u003eMicro and Mini Quadcopters: Compact 36x20mm footprint and 8-9 gram weight make this ESC ideal for sub-500 gram platforms where every gram impacts flight time and maneuverability\u003c\/li\u003e\n\u003cli\u003eDIY Drone Building: Programmable BLHeli firmware allows hobbyists to optimize motor characteristics for custom frame designs, experimenting with timing modes and acceleration profiles\u003c\/li\u003e\n\u003cli\u003eMulti-Rotor Research and Development: Open-source firmware enables researchers to implement custom control algorithms and motor commutation strategies for experimental aerial platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eInstallation begins with careful soldering of the three motor output wires (A, B, C) to the corresponding ESC pads, maintaining consistent wire gauge and connection quality to minimize resistance and voltage drop. Connect the signal wire (typically white) to the PWM output of your flight controller, the ground wire (black) to a common ground point, and the 5V BEC output (red) to power your receiver or flight controller's servo rail. The optoisolated design requires no special grounding considerations, but ensure all battery and motor connections are secure and free from corrosion. Before first flight, calibrate the ESC by connecting a fully charged battery, advancing the throttle stick to maximum, then returning to minimum while powered on. This calibration stores the PWM range in the ESC's firmware memory.\u003c\/p\u003e\n\n\u003cp\u003eProgramming the BLHeli firmware is accomplished through standard ESC programming software such as BLHeli Suite or SimonK, connected via a USB programmer or directly through a compatible flight controller. Access the programming interface by powering the ESC with a battery and connecting your programmer to the signal pad. Recommended initial settings for multi-rotor applications include damped light mode for commutation timing, providing optimal efficiency across hover and dynamic flight regimes. Adjust the acceleration profile based on your motor and propeller combination; lighter props require lower acceleration limits to prevent excessive current draw, while heavier props benefit from higher acceleration settings for responsive throttle control. Monitor motor temperature during extended flight sessions and reduce acceleration settings if the motor exceeds 80 degrees Celsius.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between optoisolated and non-optoisolated ESC designs?\u003c\/summary\u003e\n\u003cp\u003eOptoisolated ESCs use an optocoupler IC to transmit the PWM signal across a high-voltage isolation barrier, completely decoupling the low-voltage signal circuit from the high-current power stage. This eliminates ground loop currents and prevents voltage spikes from the main power bus from coupling into the flight controller signal lines. Non-optoisolated designs share a common ground between signal and power, allowing high-frequency noise from motor commutation to couple back into the flight controller, degrading gyroscope accuracy and causing vibration in camera gimbals. For multi-rotor applications, optoisolated designs provide noticeably smoother flight characteristics and reduced jitter in video footage.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use the DYS 30Amp SN30A on a 6S LiPo battery system?\u003c\/summary\u003e\n\u003cp\u003eNo, the DYS 30Amp SN30A is rated for maximum 4S LiPo (16.8V nominal) operation. Using 6S batteries (22.2V nominal) will immediately destroy the voltage regulation circuits and MOSFETs. The BEC linear regulator is specifically designed for the 2S-4S input range and lacks the circuit protection to handle higher voltages. For 6S systems, you must select an ESC specifically rated for 6S operation, which incorporates higher-voltage-rated components throughout the design.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I know if my ESC is experiencing optoisolator failure?\u003c\/summary\u003e\n\u003cp\u003eOptoisolator failures typically manifest as erratic motor behavior including random speed fluctuations, loss of throttle response, or the motor spinning at full speed regardless of throttle input. You may also observe the flight controller reporting signal loss or receiving corrupted PWM values. To test, power the ESC with a battery and use a servo tester or flight controller to send clean PWM signals across the full 1000-2000 microsecond range. If the motor response is inconsistent or nonlinear, the optoisolator has likely failed and the ESC requires replacement. This is a manufacturing defect covered under our 7-day warranty.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat motor KV rating should I use with the 30Amp ESC?\u003c\/summary\u003e\n\u003cp\u003eMotor KV selection depends on your propeller size and desired flight characteristics. For 5-inch racing props with 30Amp continuous capability, use 2300-2600 KV motors. For 6-inch props on camera platforms, select 1900-2200 KV motors. For smaller 4-inch props, 3000-3500 KV motors are appropriate. The relationship is inverse: larger props require lower KV motors to avoid excessive current draw and heat generation. Always verify that your motor and propeller combination does not exceed 30 amperes continuous current under maximum throttle conditions, calculated as (battery voltage x motor KV x propeller pitch) divided by motor efficiency factor.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuy DYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original) Online in India\u003c\/h2\u003e\n\u003cp\u003ePurchase the \u003cstrong\u003eDYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original)\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat.\u003c\/p\u003e\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":44005518737571,"sku":"TES-EVN2494","price":1655.72,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/36-314x252_f9b2863f-7981-487f-a89b-c3f454ba65e1.jpg?v=1707829512","url":"https:\/\/www.theengineerstore.in\/zh-hans\/products\/dys-30amp-mini-opto-blheli-multi-rotor-electronic-speed-controller-blheli-firmware-sn30a-original","provider":"The Engineer Store","version":"1.0","type":"link"}