{"product_id":"limerfe","title":"LimeRFE","description":"\u003cmeta name=\"description\" content=\"Buy LimeRFE online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eLimeRFE\u003c\/h1\u003e\n\n\u003cp\u003eThe LimeRFE is a professional-grade RF frontend module designed for software-defined radio (SDR) applications, providing integrated filtering, amplification, and switching capabilities for the LimeSDR platform. RF engineers, wireless researchers, and telecommunications professionals use this module to extend the frequency range and improve signal conditioning in spectrum analysis, cognitive radio development, and wireless protocol testing. It solves the critical problem of RF signal degradation and out-of-band interference by providing pre-filtering and low-noise amplification before the SDR receiver chain.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe LimeRFE operates as a dedicated RF conditioning frontend that sits between the antenna and the LimeSDR transceiver, utilizing integrated duplexers and band-pass filters to isolate desired frequency bands while rejecting unwanted signals. The module incorporates low-noise amplifiers (LNAs) with configurable gain stages, RF switches for band selection, and impedance matching networks optimized for 50-ohm antenna systems. This architecture significantly improves the noise figure of the overall receiver chain and enables operation across multiple frequency bands including cellular, ISM, and amateur radio frequencies without requiring external filter banks.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes the LimeRFE is its seamless integration with LimeSDR hardware through a dedicated connector interface, combined with software-controlled band switching and gain adjustment via USB control. The module features automatic impedance matching across bands, integrated protection circuits against RF overload, and support for both transmit and receive paths with independent filtering. This makes it ideal for applications requiring rapid frequency switching, multi-band simultaneous monitoring, and professional-grade signal integrity without the complexity of external RF component stacking.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRF Frontend Module for SDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLime Microsystems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003e100 MHz to 4 GHz (multi-band coverage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLNA Gain\u003c\/td\u003e\n\u003ctd\u003eConfigurable 0-30 dB with software control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise Figure\u003c\/td\u003e\n\u003ctd\u003eLess than 2 dB across operating bands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 for control and LimeSDR connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eApproximately 2-3W during operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated Band-Pass Filtering: Pre-configured filters for cellular, ISM, and amateur bands eliminate out-of-band interference before the SDR receiver, improving dynamic range by 20+ dB\u003c\/li\u003e\n\u003cli\u003eSoftware-Controlled RF Switching: USB-based band selection enables rapid frequency switching without physical reconfiguration, essential for spectrum monitoring and cognitive radio applications\u003c\/li\u003e\n\u003cli\u003eLow-Noise Amplification: Dual-stage LNA design with configurable gain reduces receiver noise figure to industry-standard levels, critical for weak signal detection in research applications\u003c\/li\u003e\n\u003cli\u003eAutomatic Impedance Matching: Built-in matching networks maintain 50-ohm impedance across all supported frequency bands, ensuring maximum power transfer and signal fidelity\u003c\/li\u003e\n\u003cli\u003eIntegrated Protection Circuits: RF overload protection and thermal management prevent hardware damage during high-power transmit operations or unexpected strong signals\u003c\/li\u003e\n\u003cli\u003eCompact Form Factor: Rugged aluminum enclosure with weatherproof connectors suitable for field deployment and laboratory environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpectrum Monitoring and Analysis: Professionals use LimeRFE for real-time spectrum surveillance across multiple bands with improved sensitivity, detecting weak signals in crowded RF environments for regulatory compliance testing\u003c\/li\u003e\n\u003cli\u003eCognitive Radio Development: Researchers leverage software-controlled band switching and filtering to develop intelligent spectrum-sharing algorithms and dynamic spectrum access systems in laboratory and testbed environments\u003c\/li\u003e\n\u003cli\u003eWireless Protocol Testing: Communications engineers employ LimeRFE for testing custom wireless protocols, signal conditioning, and interference mitigation in 4G\/5G research and amateur radio experimentation\u003c\/li\u003e\n\u003cli\u003eRF Education and Training: Universities and technical institutes use LimeRFE in advanced SDR courses to teach practical RF engineering concepts including filtering, amplification, and impedance matching with hands-on hardware experience\u003c\/li\u003e\n\u003cli\u003eEMI\/EMC Testing Support: Quality assurance teams integrate LimeRFE into test setups for electromagnetic interference detection and compliance verification across frequency bands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eBegin by physically connecting the LimeRFE to your LimeSDR board using the dedicated connector interface, ensuring secure seating and proper alignment. Connect your 50-ohm antenna to the appropriate SMA connector on the LimeRFE (RX for receive or TX for transmit operations). Install the LimeRFE control software on your host computer and establish USB 3.0 connectivity for command and control. The software interface allows you to select your operating frequency band, configure LNA gain levels (typically 0-30 dB in 1 dB steps), and enable or disable specific filter paths based on your application requirements.\u003c\/p\u003e\n\n\u003cp\u003eFor optimal performance, configure the band selection to match your target frequency range before activating the receiver or transmitter. The software provides real-time monitoring of gain settings and band status. When switching between frequency bands, allow 50-100 milliseconds for filter settling to ensure stable signal conditioning. For transmit applications, set appropriate gain levels to avoid RF overload conditions and monitor the integrated temperature sensor to prevent thermal throttling during extended operation. Always maintain proper antenna impedance matching and use quality 50-ohm coaxial cables to preserve the signal integrity benefits provided by the LimeRFE frontend.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the minimum frequency the LimeRFE can operate at?\u003c\/summary\u003e\n\u003cp\u003eThe LimeRFE supports frequency operation starting from 100 MHz, making it suitable for HF-band amateur radio, FM broadcast monitoring, and cellular applications. Below 100 MHz, external low-frequency modules or alternative SDR frontends are recommended for optimal performance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I use LimeRFE with SDR platforms other than LimeSDR?\u003c\/summary\u003e\n\u003cp\u003eThe LimeRFE is specifically designed for LimeSDR hardware integration through its dedicated connector interface. While the RF output can technically be connected to other SDR receivers via SMA adapters, you would lose the software control functionality for band switching and gain adjustment. For maximum capability and ease of use, LimeSDR compatibility is essential.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow does the LimeRFE improve receiver performance?\u003c\/summary\u003e\n\u003cp\u003eThe LimeRFE improves receiver performance through three mechanisms: pre-filtering reduces out-of-band interference and noise by 20+ dB, low-noise amplification reduces the overall system noise figure to below 2 dB, and impedance matching ensures maximum signal transfer efficiency. Combined, these features improve weak signal detection sensitivity by 10-15 dB compared to direct antenna connection to the SDR.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the LimeRFE suitable for transmit applications?\u003c\/summary\u003e\n\u003cp\u003eYes, the LimeRFE supports both transmit and receive operations with independent filtering paths. For transmit, the module provides output filtering to suppress harmonics and out-of-band emissions, ensuring compliance with regulatory requirements. Transmit power handling is typically limited to 10-20 dBm depending on the selected band, making it suitable for low-power wireless testing and amateur radio applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy LimeRFE Online in India\u003c\/h2\u003e\n\u003cp\u003ePurchase the \u003cstrong\u003eLimeRFE\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003eLimeRFE\u003c\/strong\u003e with fast shipping and expert support.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":43853775667363,"sku":"TES-EV02791","price":199628.69,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/lime_free_1-228x228.jpg?v=1704192266","url":"https:\/\/www.theengineerstore.in\/zh-hans\/products\/limerfe","provider":"The Engineer Store","version":"1.0","type":"link"}