{"product_id":"nooelec-sawbird-h1-barebones-premium-saw-filter-and-cascaded-ultra-low-noise-amplifier-lna-module","title":"Nooelec SAWbird+ H1 Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise Amplifier (LNA) Module","description":"\u003cmeta name=\"description\" content=\"Buy Nooelec SAWbird+ H1 Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise Amplifier (LNA) Module online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eNooelec SAWbird+ H1 Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise Amplifier (LNA) Module\u003c\/h1\u003e\n\n\u003cp\u003eThe Nooelec SAWbird+ H1 Barebones is a professional-grade RF front-end module featuring a Surface Acoustic Wave (SAW) filter combined with a cascaded ultra-low noise amplifier designed specifically for 1090 MHz ADS-B aircraft tracking and aviation surveillance applications. This module is extensively used by aviation enthusiasts, researchers, and professional ADS-B reception networks who require maximum signal sensitivity and minimal noise figure for reliable long-range aircraft detection. The SAWbird+ H1 solves the critical problem of weak signal reception in noisy RF environments by providing exceptional gain and filtering characteristics that dramatically improve reception range and data quality in Mode S\/ADS-B monitoring systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe SAWbird+ H1 Barebones represents the pinnacle of RF front-end engineering for aviation tracking applications. At its core, this module integrates a precision SAW bandpass filter centered at 1090 MHz with a cascaded low-noise amplifier architecture that delivers exceptional noise performance. The SAW filter provides sharp frequency selectivity with minimal insertion loss, effectively rejecting out-of-band interference while preserving the weak ADS-B signals transmitted by aircraft. The cascaded LNA design employs high-performance semiconductor amplification stages optimized for ultra-low noise figure, typically achieving noise figures below 0.8 dB across the critical 1090 MHz reception band. This combination ensures that the weakest aircraft signals are amplified with minimal degradation, extending reception range from standard antennas by several hundred kilometers in optimal conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe barebones configuration provides the essential RF signal conditioning without external housing, making it ideal for integration into custom antenna systems, SDR setups, and professional surveillance installations. The module operates with standard 5V DC power supply and features SMA connectors for seamless integration with existing RF systems. The carefully designed PCB layout minimizes parasitic effects and maintains impedance matching throughout the signal path. By placing high-gain, low-noise amplification immediately at the antenna feed point, the SAWbird+ H1 effectively overcomes cable losses and receiver noise figure limitations that plague conventional setups. This is particularly critical for ADS-B reception where signals arrive at power levels of -30 dBm or lower, requiring every dB of gain and noise performance to be optimized.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSAW Filter and Cascaded Ultra-Low Noise Amplifier Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eNooelec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSAWbird+ H1 Barebones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter Frequency\u003c\/td\u003e\n\u003ctd\u003e1090 MHz (ADS-B\/Mode S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBandwidth\u003c\/td\u003e\n\u003ctd\u003eApproximately 40 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise Figure\u003c\/td\u003e\n\u003ctd\u003eBelow 0.8 dB typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003eApproximately 20 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e5V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eSMA (Input and Output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePremium SAW Bandpass Filter with sharp frequency selectivity at 1090 MHz, providing excellent rejection of out-of-band interference and cellular signals that would otherwise saturate RF receivers\u003c\/li\u003e\n\u003cli\u003eCascaded Ultra-Low Noise Amplifier achieving noise figures below 0.8 dB, ensuring weak aircraft signals are amplified with minimal thermal noise degradation\u003c\/li\u003e\n\u003cli\u003eApproximately 20 dB of RF gain that effectively overcomes cable losses and receiver noise figure limitations inherent in standard SDR dongles and receivers\u003c\/li\u003e\n\u003cli\u003eBarebones PCB design optimized for integration into custom antenna systems, mast-mounted installations, and professional surveillance networks without unnecessary enclosure overhead\u003c\/li\u003e\n\u003cli\u003e5V DC powered operation with simple power supply integration, compatible with standard USB power supplies and bias-tee enabled receivers\u003c\/li\u003e\n\u003cli\u003eSMA connectors for reliable RF connections and seamless integration with standard aviation tracking antennas and receiver equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eAircraft Tracking and ADS-B Reception: Dramatically extends reception range for Mode S and ADS-B signals, enabling detection of aircraft at distances exceeding 300+ kilometers with appropriate antenna systems\u003c\/li\u003e\n\u003cli\u003eAviation Surveillance Networks: Professional deployment in distributed ADS-B receiver networks for real-time aircraft monitoring, flight tracking, and airspace awareness applications\u003c\/li\u003e\n\u003cli\u003eResearch and Development: Essential component for academic studies in RF propagation, signal processing, and aviation communication systems requiring high-sensitivity receiver front-ends\u003c\/li\u003e\n\u003cli\u003eRemote Location Installations: Ideal for mountain-top, rooftop, or isolated antenna placements where cable runs are long and signal loss is critical, providing mast-mounted amplification to overcome path losses\u003c\/li\u003e\n\u003cli\u003eSoftware Defined Radio (SDR) Enhancement: Dramatically improves performance of budget RTL-SDR dongles and professional receivers by providing premium RF front-end conditioning before signal digitization\u003c\/li\u003e\n\u003cli\u003eEmergency and Disaster Response: Enables rapid deployment of aircraft tracking capability in emergency response scenarios where real-time aviation data is critical for coordination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eInstallation of the SAWbird+ H1 Barebones requires careful attention to RF best practices and power supply management. Begin by identifying your antenna connection point and receiver input. Connect the antenna to the SMA input connector of the SAWbird+ H1 module, then connect the module's output to your receiver or SDR dongle using appropriate coaxial cable. The module requires 5V DC power supply, which can be provided through a dedicated power supply, USB power adapter, or through a bias-tee circuit integrated into your receiver. Ensure that the power supply can deliver adequate current (typically 100-200 mA) with clean, regulated voltage to minimize noise injection into the amplifier circuitry. Mount the module as close as possible to the antenna feed point to minimize cable losses between the antenna and amplifier input, ideally within 1-2 meters. If mounting outdoors, use appropriate weatherproof enclosure or radome protection while ensuring adequate ventilation to prevent thermal stress on the components.\u003c\/p\u003e\n\n\u003cp\u003eFor optimal performance, verify that your receiver or SDR software recognizes the improved signal levels and adjust gain settings accordingly to prevent saturation. Most ADS-B reception software allows manual gain adjustment - start with moderate gain settings and increase gradually while monitoring signal quality metrics. If you experience intermittent reception or data corruption, reduce receiver gain as this indicates signal saturation rather than insufficient amplification. The SAWbird+ H1 provides sufficient gain for most antenna configurations; additional amplification is rarely necessary and may degrade performance. Ensure all coaxial connections are secure and properly terminated to prevent RF leakage and impedance mismatches. For extended outdoor installations, use weatherproof connectors and consider lightning protection measures for antenna systems exposed to electrical storm risks.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the noise figure of the SAWbird+ H1 and why does it matter for ADS-B reception?\u003c\/summary\u003e\n\u003cp\u003eThe SAWbird+ H1 achieves a noise figure below 0.8 dB, which is exceptionally low for RF amplifier modules. Noise figure directly impacts the minimum detectable signal level of your receiver system. A lower noise figure means weaker aircraft signals can be reliably detected and decoded. Since ADS-B signals from distant aircraft arrive at power levels of -30 dBm or lower, every 0.1 dB improvement in noise figure translates to approximately 50-100 kilometers additional reception range depending on antenna characteristics and propagation conditions. The SAWbird+ H1's ultra-low noise performance is achieved through careful component selection and circuit topology optimization, making it significantly superior to standard receiver front-ends.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use the SAWbird+ H1 with my RTL-SDR dongle or other budget receiver?\u003c\/summary\u003e\n\u003cp\u003eYes, the SAWbird+ H1 is specifically designed to enhance budget receivers like RTL-SDR dongles, Airspy, and other software-defined radios. The module's 20 dB of gain and low noise figure compensate for the inherently poor noise performance of inexpensive receiver chips. Simply connect your antenna to the SAWbird+ H1 input, connect the module output to your receiver, and provide 5V power to the module. Most receivers with bias-tee capability can power the module directly; otherwise, use a separate 5V power supply. The improvement in reception range and signal quality is typically dramatic, often extending range by 2-3 times compared to direct antenna connection to the receiver.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between the barebones version and fully assembled versions?\u003c\/summary\u003e\n\u003cp\u003eThe barebones configuration provides the essential RF signal conditioning PCB without external housing or mounting hardware. This makes it ideal for custom integrations, mast-mounted installations, and applications where the module will be integrated into larger systems. The barebones design reduces cost and allows maximum flexibility in mounting and enclosure selection. If you require a fully enclosed, ready-to-use module with weatherproof housing and mounting brackets, you may want to consider the fully assembled SAWbird+ H1 variant. However, the barebones version offers superior performance for professional installations where custom mounting and integration are planned.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow should I power the SAWbird+ H1 Barebones module?\u003c\/summary\u003e\n\u003cp\u003eThe SAWbird+ H1 requires clean 5V DC power supply capable of delivering 100-200 mA of current. Several power options are available: use a dedicated 5V USB power adapter connected to the module's power pins, integrate a bias-tee circuit into your receiver to power the module through the coaxial cable, or use a separate regulated power supply. For best performance, use a quality regulated power supply with good filtering to minimize noise injection into the amplifier. If using a bias-tee approach, ensure your receiver supports this feature and that appropriate blocking capacitors are installed to prevent DC current from damaging your receiver input stage. Always verify correct polarity before applying power to avoid component damage.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat antenna should I use with the SAWbird+ H1 for maximum ADS-B reception range?\u003c\/summary\u003e\n\u003cp\u003eThe SAWbird+ H1 works with any 1090 MHz antenna, but performance depends on antenna quality and installation location. Optimal antennas for ADS-B reception include dipole arrays, collinear arrays, and commercial aviation antennas specifically designed for 1090 MHz. The antenna's gain, radiation pattern, and mounting height are critical factors. A simple 1090 MHz dipole antenna mounted on a rooftop or high location will provide excellent results with the SAWbird+ H1. Avoid mounting antennas near metal structures, buildings, or electrical installations that can cause multipath reflections and signal degradation. For maximum range, mount the antenna as high as possible with unobstructed line-of-sight to the horizon. The combination of a quality antenna, the SAWbird+ H1's premium front-end, and proper receiver software can achieve reception ranges exceeding 300 kilometers under ideal conditions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\n\u003c\/summary\u003e\u003c\/details\u003e\n\u003ch2\u003eBuy Nooelec SAWbird+ H1 Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise Amplifier (LNA) Module Online in India\u003c\/h2\u003e\n\u003cp\u003ePurchase the \u003cstrong\u003eNooelec SAWbird+ H1 Barebones - Premium SAW Filter and Cascaded Ultra-Low Noise Amplifier (LNA) Module\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat.\u003c\/p\u003e\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":43853782188195,"sku":"TES-EV02846","price":5351.94,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/100804-228x228.jpg?v=1704192420","url":"https:\/\/www.theengineerstore.in\/zh-hans\/products\/nooelec-sawbird-h1-barebones-premium-saw-filter-and-cascaded-ultra-low-noise-amplifier-lna-module","provider":"The Engineer Store","version":"1.0","type":"link"}