XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe
- Unit price
- / per
XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe
Take precise control of heating and cooling systems with the XH-W3001 Digital Temperature Controller. This compact, feature-rich thermostat module operates on 220V AC and switches loads up to 10A, making it ideal for incubators, aquariums, fermentation chambers, greenhouses, and industrial heating/cooling applications. The bright LED digital display provides real-time temperature readings, while the included NTC waterproof probe ensures accurate sensing across a wide range. Easy push-button programming lets you set target temperature, hysteresis, and high/low alarms in seconds. Available now from The Engineer Store, Bengaluru with fast shipping, 7-day warranty on manufacturing defects, and expert support.
Specifications
| Model | XH-W3001 |
| Supply Voltage | 220V AC (50/60 Hz) |
| Maximum Load Current | 10A (resistive load) |
| Temperature Measurement Range | -50 degreesC to +110 degreesC |
| Temperature Control Accuracy | +/-0.1 degreesC (display resolution) |
| Measurement Accuracy | +/-1 degreesC (-20 degreesC to +70 degreesC typical) |
| Hysteresis Setting | 0.1 degreesC - 15 degreesC (adjustable) |
| Sensor Type | NTC 10K (waterproof probe included) |
| Probe Cable Length | Approx. 100 cm (1 meter) |
| Display | 0.56-inch 3-digit Red LED |
| Control Mode | Heating or Cooling (user-selectable) |
| Alarm Function | High & Low temperature alarm with configurable limits |
| Module Dimensions | Approx. 48 x 40 x 31 mm |
| Panel Cutout | Approx. 45.5 x 26.5 mm |
| Operating Humidity | 20% - 85% RH (non-condensing) |
| Type | Temperature Controller / Thermostat Module |
| Origin | Original / Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- Dual-Mode Operation: Switch between heating and cooling control with a single menu setting - one controller for virtually any thermal application.
- Bright LED Display: 0.56-inch red digits are clearly visible from a distance, even in dimly lit environments, showing real-time temperature at a glance.
- Wide Sensing Range: Measures from -50 degreesC to +110 degreesC, covering deep-freeze monitoring to high-temperature process control.
- Adjustable Hysteresis: Fine-tune the on/off differential from 0.1 degreesC to 15 degreesC to prevent relay chatter and extend equipment life.
- High & Low Temperature Alarms: Set independent upper and lower alarm thresholds; the display flashes to alert you when limits are breached.
- 10A Relay Output: Directly drives heaters, fans, solenoid valves, or compressors up to 2,200W at 220V - no external relay needed for most loads.
- Waterproof NTC Probe: Stainless-steel-tipped, sealed sensor probe is safe for submersion in water, soil, or other liquids.
- Simple 3-Button Interface: SET, UP (), and DOWN () buttons make parameter configuration intuitive - no manual required for basic setup.
- Compact Panel-Mount Design: Snap-fit housing slides into a standard rectangular cutout, keeping your enclosure clean and professional.
- Temperature Calibration Offset: Built-in calibration parameter lets you correct for probe placement or environmental offsets.
- Power-Off Memory: All settings are stored in non-volatile memory - the controller resumes operation with the same parameters after a power cycle.
- Sensor Fault Detection: Automatically displays an error code and cuts the relay output if the probe is disconnected or shorted, protecting your system.
Why Choose This?
- 100% Authentic - sourced directly from trusted, authorized suppliers with authentication verified.
- 1-5 days shipping - dispatched from our Bengaluru warehouse; same-day delivery available within Bengaluru.
- Expert Technical Support - our engineers help you with wiring, parameter setup, and troublesho
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe Online in India
Purchase the XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.
XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe
- Unit price
- / per
Adding product to your cart
You may also like
XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe
Take precise control of heating and cooling systems with the XH-W3001 Digital Temperature Controller. This compact, feature-rich thermostat module operates on 220V AC and switches loads up to 10A, making it ideal for incubators, aquariums, fermentation chambers, greenhouses, and industrial heating/cooling applications. The bright LED digital display provides real-time temperature readings, while the included NTC waterproof probe ensures accurate sensing across a wide range. Easy push-button programming lets you set target temperature, hysteresis, and high/low alarms in seconds. Available now from The Engineer Store, Bengaluru with fast shipping, 7-day warranty on manufacturing defects, and expert support.
Specifications
| Model | XH-W3001 |
| Supply Voltage | 220V AC (50/60 Hz) |
| Maximum Load Current | 10A (resistive load) |
| Temperature Measurement Range | -50 degreesC to +110 degreesC |
| Temperature Control Accuracy | +/-0.1 degreesC (display resolution) |
| Measurement Accuracy | +/-1 degreesC (-20 degreesC to +70 degreesC typical) |
| Hysteresis Setting | 0.1 degreesC - 15 degreesC (adjustable) |
| Sensor Type | NTC 10K (waterproof probe included) |
| Probe Cable Length | Approx. 100 cm (1 meter) |
| Display | 0.56-inch 3-digit Red LED |
| Control Mode | Heating or Cooling (user-selectable) |
| Alarm Function | High & Low temperature alarm with configurable limits |
| Module Dimensions | Approx. 48 x 40 x 31 mm |
| Panel Cutout | Approx. 45.5 x 26.5 mm |
| Operating Humidity | 20% - 85% RH (non-condensing) |
| Type | Temperature Controller / Thermostat Module |
| Origin | Original / Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- Dual-Mode Operation: Switch between heating and cooling control with a single menu setting - one controller for virtually any thermal application.
- Bright LED Display: 0.56-inch red digits are clearly visible from a distance, even in dimly lit environments, showing real-time temperature at a glance.
- Wide Sensing Range: Measures from -50 degreesC to +110 degreesC, covering deep-freeze monitoring to high-temperature process control.
- Adjustable Hysteresis: Fine-tune the on/off differential from 0.1 degreesC to 15 degreesC to prevent relay chatter and extend equipment life.
- High & Low Temperature Alarms: Set independent upper and lower alarm thresholds; the display flashes to alert you when limits are breached.
- 10A Relay Output: Directly drives heaters, fans, solenoid valves, or compressors up to 2,200W at 220V - no external relay needed for most loads.
- Waterproof NTC Probe: Stainless-steel-tipped, sealed sensor probe is safe for submersion in water, soil, or other liquids.
- Simple 3-Button Interface: SET, UP (), and DOWN () buttons make parameter configuration intuitive - no manual required for basic setup.
- Compact Panel-Mount Design: Snap-fit housing slides into a standard rectangular cutout, keeping your enclosure clean and professional.
- Temperature Calibration Offset: Built-in calibration parameter lets you correct for probe placement or environmental offsets.
- Power-Off Memory: All settings are stored in non-volatile memory - the controller resumes operation with the same parameters after a power cycle.
- Sensor Fault Detection: Automatically displays an error code and cuts the relay output if the probe is disconnected or shorted, protecting your system.
Why Choose This?
- 100% Authentic - sourced directly from trusted, authorized suppliers with authentication verified.
- 1-5 days shipping - dispatched from our Bengaluru warehouse; same-day delivery available within Bengaluru.
- Expert Technical Support - our engineers help you with wiring, parameter setup, and troublesho
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe Online in India
Purchase the XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy XH-W3001 220V 10A Digital Display LED Temperature Controller With Thermostat Control Switch Probe at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.
You may also like
You may also like
Recommended products
Quick service and response, product quality and packing is satisfactory.
Well built shop, not only sales but they building your. Even they conduct seminar s. You get materials at reasonable price
Very pleased with the service and hospitality. Perfect place to solve projects for engineers.I had some problems with my project , went and sat down with the guys over there . We worked on it for 4hrs and the output came . Best part was the service we received, very pleased and appreciated. Thank you so much ENGINEER STORE
Very good customer service, always ready to help. They helped us with our project for 4 hrs straight, leaving their work behind. In the end, they refused to take a single penny. Wonderful people
By completing this form, you are signing up to receive our emails and can unsubscribe at any time.
FAQ Below are some of are common questions:
Shipping charge & Delivery timeline.
1) Standard shipping: Rs 49- The order gets delivered within 3-5 working days. (6-7 days in case of the battery as it travels through the surface)
2)Free shipping is applicable to the purchase of Rs.499 and above. The order gets delivered within 5-7 working days. (8-10 days in case of the battery as it travels through the surface)
3)Blue dart Air shipping Rs: 99 and above depending on parcel weight the order gets delivered within3-5working days.
4) Same-day delivery only applicable for Pune-specific pin codes Rs-79 delivery will be done same day between 1 p.m to 9 p.m (the order should be placed before 12:30 p.m)
How do I pay for my order?
You can pay through multiple payment options on theengineerstore.in the checkout page. You can pay through Credit/Debit Card, Internet Banking, Mobile Payments, Manual bank transfer, and Wallets. You can also apply a coupon that you might receive from The Engineer store or redeem The Engineer store points that you have earned from your previous purchases.
Cash on Delivery is offered theengineerstore.in and it is location dependent. Applicability of COD is determined by our system once you enter the pin-code of your area. Also the COD service is chargeable (Rs.25). It is charged by the shipping company for cash handlings.
Once you place a COD order, our executive will call you to confirm your order only after which your order will be processed.
It is best to prepay your order and buy confidently.
You can pay through multiple payment options on theengineerstore.in the checkout page. You can pay through Credit/Debit Card, Internet Banking, Mobile Payments, Manual bank transfer, and Wallets. You can also apply a coupon that you might receive from The Engineer store or redeem The Engineer store points that you have earned from your previous purchases.
Cash on Delivery is offered theengineerstore.in and it is location dependent. Applicability of COD is determined by our system once you enter the pin-code of your area. Also the COD service is chargeable (Rs.25). It is charged by the shipping company for cash handlings.
Once you place a COD order, our executive will call you to confirm your order only after which your order will be processed.
It is best to prepay your order and buy confidently.
It is understandable that a customer will have some technical query before making any purchase on theengineerstore.in.
No worries, we are there to answer your technical queries.
What customer needs to do?Submit a ticket mentioning1. Product code/SKU--->It is found on the product page.(just on the right hand side of the product image)2. Brief description of your query.Once we receive your query, we will get back to you soon with the possible answers.
It happens sometimes, In such cases the money is neither with us nor with the bank but if we receive your money without order, we will refund it within 2-3 working days. Rest assured, the money will come back to your bank account after 10-15 working days once the payment reconciliationhappens at bank's end.
If the money still does not reflect in your bank account, contact us and we will get back to you
What customer needs to do?
Submit a ticket mentioning1. Name of the customer2. Email ID used at the time of placing order.3. Any reference number of transaction that you received from bank.