4CH Remote Control Transmitter Receiver WITH PACKING

Complete Wireless Control Solution for Multi-Channel Projects

Take full wireless command of your projects with this 4-Channel Remote Control Transmitter and Receiver Kit, delivered in complete retail packing with everything you need to get started. This versatile RF module set enables you to wirelessly control up to four independent devices or channels from a convenient handheld transmitter, making it ideal for robotics, home automation, industrial control, and countless DIY applications.

Key Features

• 4 Independent Channels: Control up to four separate outputs simultaneously or individually
• Long Operating Range: Reliable wireless communication over extended distances (typically 50-100+ meters in open areas)
• Simple Pairing: Easy-to-use learning code or fixed code system for quick setup
• Compact Transmitter: Ergonomic handheld remote with clearly labeled buttons for each channel
• Versatile Receiver Board: Onboard relay outputs or logic-level outputs for flexible integration
• Multiple Operating Modes: Supports momentary, toggle, and latching modes for diverse applications
• Low Power Consumption: Efficient RF circuitry ensures long battery life for the transmitter
• Secure Signal Encoding: Encoded transmission prevents interference and unauthorized control
• LED Indicators: Visual feedback on both transmitter and receiver for signal confirmation
• Complete Retail Packing: Arrives professionally packaged with all components and accessories included

Specifications

Parameter	Detail
Channels	4 (Independent)
Frequency	315 MHz / 433 MHz RF
Receiver Operating Voltage	DC 12V (typical, check specific model)
Transmitter Power	12V 23A battery (included in packing)
Range	50-100+ meters (open area, line of sight)
Output Type	Relay / Logic Level
Relay Rating	10A @ 250V AC / 10A @ 30V DC (per channel)
Operating Modes	Momentary / Toggle / Latching
Encoding	Learning Code / Fixed Code
Receiver Dimensions	Compact PCB module
Transmitter Type	Handheld 4-button keyfob
Operating Temperature	-20 degreesC to +70 degreesC
Antenna	Spring coil / wire antenna included
Packing	Complete retail box with all accessories
Type	RF Wireless Control Module Kit
Origin	Original / Authentic
Warranty	7-day warranty on manufacturing defects
Support	Email & WhatsApp 24/7

What's in the Box

• 1 x 4-Channel Receiver Module Board
• 1 x 4-Button Remote Control Transmitter (Keyfob)
• 1 x Antenna (for receiver, if external)
• 1 x Battery for Transmitter (23A 12V, pre-installed or included)
• 1 x Wiring/Connection Guide
• Complete retail packaging with documentation and support materials

How It Works

The system operates using radio frequency (RF) communication between the handheld transmitter and the receiver board:

1. Transmitter: When you press one of the four buttons on the remote, it sends a uniquely encoded RF signal corresponding to that channel
2. Receiver: The receiver module picks up the signal via its antenna, decodes it, and activates the corresponding relay or output channel
3. Output Control: Each channel's relay can switch lights, motors, solenoids, door locks, or any electrical load within the relay's rated capacity
4. Mode Selection: Depending on configuration, outputs can operate in momentary (active only while button is held), toggle (press once ON, press again OFF), or latching mode

Operating Modes Explained

Mode	Behavior	Best For
Momentary	Output active only while button is pressed	Horns, momentary triggers, jogging motors
Toggle	Each press alternates ON/OFF state	Lights, fans, appliances
Latching	Press one button ON, press another OFF	Gate openers, industrial machinery

Pin / Connection Layout

Receiver Board Typical Connections

``` 4CH RECEIVER MODULE

[VCC] [GND] Power Input (12V DC)

[CH1] Relay 1 (NO / COM / NC) [CH2] Relay 2 (NO / COM / NC) [CH3] Relay 3 (NO / COM / NC) [CH4] Relay 4 (NO / COM / NC) [ANT] Antenna Wire

[LEARN] Learning/Pairing Button

[LED] Status Indicator Relay Terminal Legend: NO = Normally Open COM = Common NC = Normally Closed ```

Relay Wiring (Per Channel)

``` NO To Load (+) 12V COM Load NC (Alternative connection) GND To Load (-) ```

Pairing / Learning Process

1. Power the receiver with 12V DC supply
2. Press the LEARN button on the receiver board - the LED will light up or blink
3. Press any button on the transmitter - the receiver LED will flash to confirm successful pairing
4. Repeat for additional remotes if needed (most receivers support multiple transmitters)
5. To clear memory: Press and hold the LEARN button

Frequently Asked Questions

When will I receive my order?

Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.

Is technical support available?

Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.

What is your return policy?

7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.

Buy 4CH Remote Control Transmitter Receiver WITH PACKING Online in India

Purchase the 4CH Remote Control Transmitter Receiver WITH PACKING online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on 4CH Remote Control Transmitter Receiver WITH PACKING with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.

Looking to buy 4CH Remote Control Transmitter Receiver WITH PACKING at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.