{"product_id":"dji-naza-m-v2-multirotor-autopilot-controller-set-with-gps","title":"DJI NAZA M V2 Multirotor Autopilot Controller set with GPS","description":"\u003cmeta name=\"description\" content=\"Buy DJI NAZA M V2 Multirotor Autopilot Controller set with GPS online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eDJI NAZA M V2 Multirotor Autopilot Controller set with GPS\u003c\/h1\u003e\n\n\u003cp\u003eThe DJI NAZA M V2 is a professional-grade flight control system designed for multi-rotor unmanned aerial vehicles, integrating advanced autopilot capabilities with dual-axis gyroscope stabilization and GPS-assisted positioning. This system is widely adopted by professional drone operators, aerial photographers, surveying engineers, and research institutions who require precision flight control and autonomous navigation capabilities. The NAZA M V2 solves critical challenges in flight stability, position holding, and autonomous waypoint navigation by combining inertial measurement units with GPS correction algorithms to deliver sub-meter accuracy in hovering and autonomous flight operations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe DJI NAZA M V2 Multirotor Autopilot Controller operates on a sophisticated sensor fusion architecture combining a 3-axis accelerometer, 3-axis gyroscope, barometric altimeter, and integrated GPS receiver. The flight controller processes sensor data at 400Hz, enabling real-time attitude correction and stabilization across all three axes. The dual-axis gyroscope provides independent roll and pitch stabilization, while the integrated barometer maintains altitude hold functionality even in GPS-denied environments. The system architecture supports both manual and autonomous flight modes, with the GPS module providing absolute position reference for return-to-home functionality, waypoint navigation, and precision hovering in outdoor environments.\u003c\/p\u003e\n\n\u003cp\u003eThe NAZA M V2 distinguishes itself through its modular design philosophy, allowing seamless integration with various multi-rotor platforms ranging from quadcopters to hexacopters. The controller features a dedicated expansion port for external sensors, enabling integration of additional payloads such as gimbals, cameras, and telemetry modules. The system supports multiple communication protocols including PWM, CAN bus, and serial interfaces, providing flexibility in integrating with third-party components. The integrated IMU calibration algorithms and automatic gain tuning reduce setup complexity while maintaining professional-grade flight performance across varying environmental conditions and payload configurations.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMultirotor Flight Control System with Integrated GPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDJI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNAZA M V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIMU Sensors\u003c\/td\u003e\n\u003ctd\u003e3-axis Accelerometer, 3-axis Gyroscope, Barometric Altimeter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPS Module\u003c\/td\u003e\n\u003ctd\u003eIntegrated dual-frequency GPS receiver with WAAS support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpdate Rate\u003c\/td\u003e\n\u003ctd\u003e400Hz sensor processing frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight Modes\u003c\/td\u003e\n\u003ctd\u003eManual, Attitude Hold, GPS Hold, Return-to-Home, Waypoint Navigation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Platforms\u003c\/td\u003e\n\u003ctd\u003eQuadcopter, Hexacopter, Octocopter configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Ports\u003c\/td\u003e\n\u003ctd\u003ePWM outputs, CAN bus, Serial UART, Expansion connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eDual-axis gyroscope stabilization providing independent roll and pitch correction at 400Hz update rate for smooth, stable flight characteristics\u003c\/li\u003e\n\u003cli\u003eIntegrated GPS receiver with WAAS correction enabling absolute position hold accuracy within 1-2 meters in open sky conditions\u003c\/li\u003e\n\u003cli\u003eBarometric altimeter for altitude hold functionality independent of GPS, critical for indoor and GPS-denied environment operations\u003c\/li\u003e\n\u003cli\u003eModular expansion architecture supporting external sensors, gimbals, and telemetry modules through dedicated expansion connectors\u003c\/li\u003e\n\u003cli\u003eAutomatic IMU calibration and gain tuning algorithms reducing setup time while maintaining consistent flight performance across varying payloads\u003c\/li\u003e\n\u003cli\u003eReturn-to-Home functionality with GPS waypoint recording for safe recovery of aircraft in emergency situations\u003c\/li\u003e\n\u003cli\u003eMultiple flight mode support including manual control, attitude hold, and autonomous waypoint navigation\u003c\/li\u003e\n\u003cli\u003eCAN bus and serial communication protocols enabling integration with advanced telemetry and ground station systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eAerial photography and cinematography requiring stable platform for camera gimbals with GPS-assisted position holding for consistent framing\u003c\/li\u003e\n\u003cli\u003ePrecision agriculture mapping and crop monitoring using autonomous waypoint navigation for systematic field coverage and data collection\u003c\/li\u003e\n\u003cli\u003eSurveying and geospatial mapping applications requiring sub-meter accuracy positioning and altitude hold for consistent aerial survey data\u003c\/li\u003e\n\u003cli\u003eResearch and development projects involving multi-rotor platform testing, sensor integration, and flight dynamics experimentation\u003c\/li\u003e\n\u003cli\u003eInfrastructure inspection and maintenance monitoring for power lines, towers, and buildings using autonomous flight paths and return-to-home safety features\u003c\/li\u003e\n\u003cli\u003eSearch and rescue operations utilizing GPS waypoint navigation and extended flight time through efficient power management\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eSetup of the DJI NAZA M V2 requires initial calibration of the inertial measurement unit through the dedicated calibration interface. Mount the flight controller on your multi-rotor frame using vibration-dampening materials to isolate sensor noise, then connect the GPS module to the designated GPS port. Connect your ESCs to the PWM output channels, ensuring correct motor mapping through the configuration software. Perform compass calibration in an area free from magnetic interference, then conduct a test flight in manual mode to verify basic stabilization before enabling GPS hold or autonomous modes.\u003c\/p\u003e\n\n\u003cp\u003eFor autonomous operations, configure your waypoints using the ground station software, ensuring GPS signal acquisition before takeoff. The system will automatically calculate flight paths and execute waypoint navigation while maintaining altitude and position hold. Always perform pre-flight checks including IMU calibration verification, GPS signal strength confirmation, and battery voltage validation. For extended operations, monitor the telemetry data stream to verify sensor health and flight performance parameters. Refer to the comprehensive manual for detailed configuration options and advanced features including custom gain tuning and sensor filtering parameters.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the GPS accuracy of the DJI NAZA M V2 system?\u003c\/summary\u003e\n\u003cp\u003eThe NAZA M V2 achieves horizontal position accuracy of 1-2 meters under open sky conditions with clear satellite visibility. The integrated WAAS correction capability improves accuracy in favorable conditions. Vertical altitude accuracy is approximately 0.5-1 meter using the barometric altimeter. For applications requiring higher accuracy, external RTK-GPS modules can be integrated through the expansion connector, achieving centimeter-level precision.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan the NAZA M V2 operate in GPS-denied environments?\u003c\/summary\u003e\n\u003cp\u003eYes, the barometric altimeter and gyroscope-based stabilization enable stable flight in GPS-denied environments such as indoors or under dense foliage. The system will maintain altitude hold and attitude stabilization, but position hold and return-to-home features require GPS signal. Manual control remains fully functional in all environments, making the system versatile for various operational scenarios.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat multi-rotor platforms are compatible with the NAZA M V2?\u003c\/summary\u003e\n\u003cp\u003eThe NAZA M V2 supports quadcopter, hexacopter, and octocopter configurations. The modular design allows integration with various frame sizes and motor counts. The system requires 4-8 PWM output channels depending on your platform configuration. Compatibility is determined by available mounting space and power supply capacity, typically 5V at 2-3 amperes for the flight controller and GPS module.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I calibrate the compass on the NAZA M V2?\u003c\/summary\u003e\n\u003cp\u003eCompass calibration is performed through the DJI Assistant software by rotating the aircraft in a figure-eight pattern in a horizontal plane, away from magnetic interference sources such as power lines and metal structures. The calibration process typically takes 2-3 minutes. Recalibrate whenever you relocate your operations to a significantly different geographic location or after any major modifications to your aircraft structure.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the maximum payload capacity for aircraft using NAZA M V2?\u003c\/summary\u003e\n\u003cp\u003eThe NAZA M V2 itself is lightweight at approximately 38 grams, but payload capacity depends entirely on your multi-rotor platform design, motor thrust, and battery capacity. The flight controller can manage payloads from lightweight FPV cameras to professional cinema cameras and sensor packages. Ensure your platform design provides sufficient thrust margin for stable flight with your intended payload configuration.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Engineer Store\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy DJI NAZA M V2 Multirotor Autopilot Controller set with GPS Online in India\u003c\/h2\u003e\n\n\u003cp\u003ePurchase the \u003cstrong\u003eDJI NAZA M V2 Multirotor Autopilot Controller set with GPS\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003eDJI NAZA M V2 Multirotor Autopilot Controller set with GPS\u003c\/strong\u003e with fast shipping and expert support.\u003c\/p\u003e\n\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":44005470109859,"sku":"TES-EVN1796","price":20367.9,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/IMG_0690-314x252.jpg?v=1707827582","url":"https:\/\/www.theengineerstore.in\/zh-hant\/products\/dji-naza-m-v2-multirotor-autopilot-controller-set-with-gps","provider":"The Engineer Store","version":"1.0","type":"link"}