Holybro S500 V2 Motor 2216-920KV-CW

The Holybro S500 V2 Motor 2216-920KV-CW is a high-performance brushless DC motor specifically engineered for quadcopter and multirotor drone applications, delivering 920 RPM per volt with clockwise rotation configuration. Professional drone operators, aerial photography enthusiasts, and commercial UAV service providers rely on this motor for its exceptional power-to-weight ratio and consistent thrust delivery. This motor solves the critical challenge of achieving stable flight dynamics and extended flight times in medium-lift multirotor platforms by providing optimized torque characteristics and minimal vibration during operation.

Product Overview

The Holybro S500 V2 Motor operates on brushless direct current technology, utilizing three-phase commutation to generate smooth, efficient rotational motion without mechanical brushes. The motor features a stator wound with high-grade copper wire and a precision-machined rotor with neodymium magnets, enabling rapid acceleration and deceleration cycles essential for drone flight control. The 2216 frame size represents a 22mm diameter stator with 16mm height, providing an optimal balance between power output and weight for the S500 quadcopter platform. At 920KV rating, this motor spins at 920 revolutions per minute for every volt of applied electrical potential, making it ideal for larger propellers that require lower RPM but higher torque characteristics.

The clockwise rotation variant ensures proper counter-rotating motor pairing when combined with counter-clockwise motors on a quadcopter frame, eliminating gyroscopic precession and maintaining stable flight characteristics. The motor incorporates reinforced bearing assemblies rated for extended operational cycles, with sealed ball bearings that minimize friction and reduce heat generation during sustained flights. Quality construction includes a hardened steel shaft, precision-fitted bell housing, and vibration-dampening design that integrates seamlessly with standard Holybro S500 V2 frame assemblies and compatible ESC controllers.

Key Specifications

Specification	Details
Product Type	Brushless DC Motor for Multirotor Drones
Brand	Holybro
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp
Motor Frame Size	2216 (22mm stator diameter, 16mm height)
KV Rating	920 RPM per volt
Rotation Direction	Clockwise CW
Stator Configuration	12N14P (12 pole stator, 14 pole rotor)
Shaft Diameter	3mm hardened steel
Bearing Type	Sealed ball bearings with vibration dampening
Weight	Approximately 42-45 grams per motor
Operating Voltage Range	7.4V to 14.8V (2S to 4S LiPo)
Maximum Current Draw	25-30A continuous (peak up to 35A)
Thrust Output	Approximately 1.2-1.5 kg per motor with 10-inch propeller

Key Features

• High-efficiency brushless design with 920KV rating optimized for larger propellers, delivering superior torque and extended flight duration compared to higher KV alternatives
• Precision-engineered stator with premium copper windings and neodymium magnet rotor assembly, ensuring consistent power delivery and minimal cogging effects during throttle transitions
• Sealed ball bearing construction with vibration isolation technology reduces mechanical noise and extends bearing lifespan during intensive flight operations and aggressive maneuvers
• Clockwise rotation configuration engineered for seamless integration with counter-clockwise motors, eliminating gyroscopic imbalance and enabling stable autonomous flight control systems
• Reinforced 3mm hardened steel shaft rated for high-stress propeller mounting, compatible with standard M2 motor screws and quick-release propeller adapters
• Compact 2216 frame size delivers optimal power-to-weight ratio, enabling rapid acceleration while maintaining flight stability on S500 and similar medium-lift platforms

Applications and Use Cases

• Aerial photography and videography platforms requiring stable hover characteristics and extended flight times, where the 920KV motor provides smooth thrust curves essential for cinematic camera movements
• Search and rescue operations and surveying applications where medium-lift quadcopters must carry payload sensors while maintaining precise altitude control and extended endurance
• Agricultural monitoring and crop inspection missions utilizing multirotor platforms that require consistent thrust delivery across varying environmental conditions and temperature ranges
• Professional FPV racing and acrobatic flight training where matched motor sets ensure synchronized acceleration and predictable flight dynamics during complex maneuvers
• Industrial inspection and infrastructure assessment tasks requiring stable platforms for thermal imaging and LiDAR sensor payloads on medium-lift drone architectures

How to Use

Begin installation by verifying motor rotation direction matches your quadcopter frame configuration, ensuring clockwise motors are mounted on designated CW positions. Secure the motor to the frame arm using M2 screws with appropriate washers, ensuring the shaft is perfectly aligned with the propeller adapter to minimize vibration. Connect the three motor leads to your ESC (Electronic Speed Controller) output wires, matching the phase sequence to your controller configuration. If the motor rotates in reverse direction during initial throttle test, swap any two of the three ESC lead connections to reverse rotation polarity.

Before flight operations, perform a static thrust test with propellers installed at 50% throttle to verify all four motors produce balanced thrust output. Balance your propellers using a precision prop balancer to eliminate vibrations that can degrade flight stability and reduce bearing lifespan. Monitor motor temperature during extended flights, ensuring it remains below 80 degrees Celsius by maintaining adequate airflow and avoiding sustained maximum throttle conditions. Regularly inspect the motor shaft for debris accumulation and clean bearing seals with compressed air to maintain optimal performance and extend operational lifespan.

Frequently Asked Questions

What is the difference between 920KV and higher KV motors for drone applications?

The 920KV rating means the motor spins 920 RPM per applied volt. Lower KV motors like 920KV produce higher torque at lower RPM, enabling larger propellers to operate efficiently at slower speeds, resulting in extended flight time and smoother thrust characteristics. Higher KV motors (1200KV and above) spin faster with smaller propellers, providing quicker acceleration but reduced endurance. For the S500 platform, 920KV is optimized for 10-12 inch propellers requiring sustained lift capacity.

Can I use this clockwise motor with counter-clockwise propellers?

No, this clockwise motor must be paired with clockwise propellers on the corresponding frame arms. Mixing rotation directions with incorrect propellers will cause severe vibration, unstable flight, and potential motor damage. Always verify your frame configuration specifies which arms require CW motors and which require CCW motors, then match motor and propeller rotation accordingly.

What ESC amperage rating should I use with the 2216-920KV motor?

For this motor with maximum 30A continuous and 35A peak current draw, select an ESC rated for minimum 30A continuous, preferably 40A for safety margin and thermal headroom. Using an undersized ESC will cause voltage sag during aggressive throttle inputs and potential ESC thermal shutdown. Ensure your ESC supports 3S to 4S LiPo battery voltages matching your motor operating range of 7.4V to 14.8V.

How do I balance this motor for vibration-free operation?

Motor balancing involves installing the motor on your frame, attaching propellers, and using a vibration measurement device to identify imbalance. Minor vibrations often result from propeller imbalance rather than motor defects. Use a precision propeller balancer to match blade weights, and ensure the motor shaft is perfectly perpendicular to the frame arm. If vibration persists after propeller balancing, the motor may have internal rotor imbalance requiring replacement under warranty.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy Holybro S500 V2 Motor 2216-920KV-CW Online in India

Purchase the Holybro S500 V2 Motor 2216-920KV-CW online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Holybro S500 V2 Motor 2216-920KV-CW with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.