{"product_id":"pololu-5035-5034-5033-motoron-m3h256-triple-motor-controller-for-raspberry-pi","title":"Pololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi","description":"\u003cmeta name=\"description\" content=\"Buy Pololu 503550345033 Motoron M3H256 Triple Motor Controller f online in India at best price from The Engineer Store, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\u003ch1\u003ePololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi\u003c\/h1\u003e\n\u003cp\u003ePololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi\u003c\/p\u003e\n\u003cp\u003eThe Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I2C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that need to control even more motors. The M3H256 operates from 4.5 V to 48 V and can deliver continuous output currents up to 2 A per motor. This version ships without any header pins, terminal blocks, or mounting hardware included \/with a variety of header pin and terminal block options included but not soldered in\/with soldered stackable headers and terminal blocks.\u003c\/p\u003e\n\u003cp\u003eThe Motoron M3H256 add-on board makes it easy to control up to three bidirectional, brushed DCmotorswith a compatible Raspberry Pi (Model B+ or newer). It operates from 4.5 V to 48 V and can deliver continuous output currents up to 2 A per motor. The M3H256 is designed to stack on top of a Raspberry Pi (Model B+ or newer), similar to a HAT (Hardware Attached on Top), and multiple Motoron controllers can be stacked on top of each other, allowing independent control of many motors. Unlike most ofour motor driversand motor driverexpansion boards for Raspberry Pi, the Motoron does not require any PWM outputs on your Raspberry Pi. Instead, the Raspberry Pi communicates with the Motoron using I2C, so only two GPIO pins are needed regardless of how many Motorons you connect.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.fabtolab.com\/image\/catalog\/Accessory\/Motor\/%20Motor%20Control%20or%20Motor%20Driver\/Brushed\/0J11683.1200.png\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree M3H256 versions are available to provide different options for the through-hole connectors:\u003c\/li\u003e\n\u003cli\u003e\nFor applications using an Arduino or compatible controller, consider the Motoron M3S256 instead\u003cb\u003e(also available with different connector options)\u003c\/b\u003e.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eDetails Forwithout any header pins, terminal blocks, or mounting hardware included:\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.fabtolab.com\/image\/catalog\/Accessory\/Motor\/DC%20Brushed%20Motors\/0J11671.1200.jpg\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cb\u003eDetails For\u003c\/b\u003e\u003cb\u003ewith a variety of header pin and terminal block options included but not soldered in:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cimg src=\"https:\/\/www.fabtolab.com\/image\/catalog\/Accessory\/Motor\/DC%20Brushed%20Motors\/0J11672.1200.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003cb\u003eDetails For\u003c\/b\u003e\u003cb\u003ewith soldered stackable headers and terminal blocks:\u003cbr\u003e\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.fabtolab.com\/image\/catalog\/Accessory\/Motor\/DC%20Brushed%20Motors\/0J11675.1200.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFeatures for\u003c\/b\u003e\u003cb\u003ewithout any header pins, terminal blocks, or mounting hardware included:\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThree motor control channels allow for independent control of up to three bidirectional brushed DC motors per Motoron\u003c\/li\u003e\n\u003cli\u003eMaximum output current per motor: 2.0 A continuous, 6.4 A peak for \u0026lt;1 second\u003c\/li\u003e\n\u003cli\u003eReverse-voltage protection on motor power supply (down to -40 V)\u003c\/li\u003e\n\u003cli\u003eLogic voltage range: 2.8 V to 5.5 V\u003c\/li\u003e\n\u003cli\u003eI2C clock speed: up to 400 kHz\u003c\/li\u003e\n\u003cli\u003eOptional cyclic redundancy checking (CRC)\u003c\/li\u003e\n\u003cli\u003eConfigurable motion parameters:\u003c\/li\u003e\n\u003cli\u003eMax acceleration\/deceleration forward\/reverse\u003c\/li\u003e\n\u003cli\u003eStarting speed forward\/reverse\u003c\/li\u003e\n\u003cli\u003eDirection change delay forward\/reverse\u003c\/li\u003e\n\u003cli\u003ePWM frequency: eight options available from 1 kHz to 80 kHz\u003c\/li\u003e\n\u003cli\u003eCommand timeout feature stops motors if the Raspberry Pi stops communicating\u003c\/li\u003e\n\u003cli\u003eConfigurable automatic error response\u003c\/li\u003e\n\u003cli\u003eMotor power supply (VIN) voltage measurement\u003c\/li\u003e\n\u003cli\u003eOptional pins make it easy to power the Raspberry Pi from reverse-protected motor power through anexternal regulator(not included)\u003c\/li\u003e\n\u003cli\u003eTwo status LEDs\u003c\/li\u003e\n\u003cli\u003eMotor direction indicator LEDs\u003c\/li\u003e\n\u003cli\u003eMotoronPython librarysimplifies getting started using the Motoron with a Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eNot recommended for use with 48V batteries.\u003c\/li\u003e\n\u003cli\u003eNote: Reverse voltage protection only works up to 40 V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cb\u003eFeatures for\u003c\/b\u003e\u003cb\u003ewith a variety of header pin and terminal block options included but not soldered in:\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThree motor control channels allow for independent control of up to three bidirectional brushed DC motors per Motoron.\u003c\/li\u003e\n\u003cli\u003eMaximum output current per motor: 2.0 A continuous, 6.4 A peak for \u0026lt;1 second\u003c\/li\u003e\n\u003cli\u003eReverse-voltage protection on motor power supply (down to -40 V)\u003c\/li\u003e\n\u003cli\u003eLogic voltage range: 2.8 V to 5.5 V\u003c\/li\u003e\n\u003cli\u003eI2C clock speed: up to 400 kHz\u003c\/li\u003e\n\u003cli\u003eOptional cyclic redundancy checking (CRC)\u003c\/li\u003e\n\u003cli\u003eConfigurable motion parameters:\u003c\/li\u003e\n\u003cli\u003eMax acceleration\/deceleration forward\/reverse\u003c\/li\u003e\n\u003cli\u003eStarting speed forward\/reverse\u003c\/li\u003e\n\u003cli\u003eDirection change delay forward\/reverse\u003c\/li\u003e\n\u003cli\u003ePWM frequency: eight options available from 1 kHz to 80 kHz\u003c\/li\u003e\n\u003cli\u003eCommand timeout feature stops motors if the Raspberry Pi stops communicating\u003c\/li\u003e\n\u003cli\u003eConfigurable automatic error response\u003c\/li\u003e\n\u003cli\u003eMotor power supply (VIN) voltage measurement\u003c\/li\u003e\n\u003cli\u003eOptional pins make it easy to power the Raspberry Pi from reverse-protected motor power through anexternal regulator(not included)\u003c\/li\u003e\n\u003cli\u003eTwo status LEDs\u003c\/li\u003e\n\u003cli\u003eMotor direction indicator LEDs\u003c\/li\u003e\n\u003cli\u003eMotoron Python librarysimplifies getting started using the Motoron with a Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePCB assembly only, without optional included headers, terminal blocks, or standoffs.\u003c\/li\u003e\n\u003cli\u003eNot recommended for use with 48V batteries.\u003c\/li\u003e\n\u003cli\u003eNote: Reverse voltage protection only works up to 40 V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eFeatures forwith soldered stackable headers and terminal blocks:\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eThree motor control channels allow for independent control of up to three bidirectional brushed DC motors per Motoron\u003c\/li\u003e\n\u003cli\u003eMaximum output current per motor: 2.0 A continuous, 6.4 A peak for \u0026lt;1 second\u003c\/li\u003e\n\u003cli\u003eReverse-voltage protection on motor power supply (down to -40 V)\u003c\/li\u003e\n\u003cli\u003eLogic voltage range: 2.8 V to 5.5 V\u003c\/li\u003e\n\u003cli\u003eI2C clock speed: up to 400 kHz\u003c\/li\u003e\n\u003cli\u003eOptional cyclic redundancy checking (CRC)\u003c\/li\u003e\n\u003cli\u003eConfigurable motion parameters:\u003c\/li\u003e\n\u003cli\u003eMax acceleration\/deceleration forward\/reverse\u003c\/li\u003e\n\u003cli\u003eStarting speed forward\/reverse\u003c\/li\u003e\n\u003cli\u003eDirection change delay forward\/reverse\u003c\/li\u003e\n\u003cli\u003ePWM frequency: eight options available from 1 kHz to 80 kHz\u003c\/li\u003e\n\u003cli\u003eCommand timeout feature stops motors if the Raspberry Pi stops communicating\u003c\/li\u003e\n\u003cli\u003eConfigurable automatic error response\u003c\/li\u003e\n\u003cli\u003eMotor power supply (VIN) voltage measurement\u003c\/li\u003e\n\u003cli\u003eOptional pins make it easy to power the Raspberry Pi from reverse-protected motor power through anexternal regulator(not included)\u003c\/li\u003e\n\u003cli\u003eTwo status LEDs\u003c\/li\u003e\n\u003cli\u003eMotor direction indicator LEDs\u003c\/li\u003e\n\u003cli\u003eMotoron Pythonlibrary simplifies getting started using the Motoron with a Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNot including standoffs.\u003c\/li\u003e\n\u003cli\u003eNot recommended for use with 48V batteries.\u003c\/li\u003e\n\u003cli\u003eNote: Reverse voltage protection only works up to 40 V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSpecifications for\u003c\/b\u003e\u003cb\u003ewithout any header pins, terminal blocks, or mounting hardware included:\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 3\u003c\/li\u003e\n\u003cli\u003eModel: Motoron M3H256\u003c\/li\u003e\n\u003cli\u003eControl interface: I2C\u003c\/li\u003e\n\u003cli\u003eMinimum operating voltage: 4.5 V\u003c\/li\u003e\n\u003cli\u003eMaximum operating voltage: 48 V1\u003c\/li\u003e\n\u003cli\u003eContinuous output current per channel: 2 A\u003c\/li\u003e\n\u003cli\u003ePeak output current per channel: 6.4 A\u003c\/li\u003e\n\u003cli\u003eReverse voltage protection?: Y2\u003c\/li\u003e\n\u003cli\u003eConnectors soldered?: N\u003c\/li\u003e\n\u003cli\u003ePCB dev codes: mc3h42a\u003c\/li\u003e\n\u003cli\u003eOther PCB markings: 0J13654\u003c\/li\u003e\n\u003cli\u003eSize: 32.5 mm x 56 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.5 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cb\u003eSpecifications for\u003c\/b\u003e\u003cb\u003ewith a variety of header pin and terminal block options included but not soldered in:\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eChannels:3\u003c\/li\u003e\n\u003cli\u003eModel:Motoron M3H256\u003c\/li\u003e\n\u003cli\u003eControl interface:I2C\u003c\/li\u003e\n\u003cli\u003eMinimum operating voltage:4.5 V\u003c\/li\u003e\n\u003cli\u003eMaximum operating voltage:48 V2\u003c\/li\u003e\n\u003cli\u003eContinuous output current per channel:2 A\u003c\/li\u003e\n\u003cli\u003ePeak output current per channel:6.4 A\u003c\/li\u003e\n\u003cli\u003eReverse voltage protection?:Y3\u003c\/li\u003e\n\u003cli\u003eConnectors soldered?:N\u003c\/li\u003e\n\u003cli\u003ePCB dev codes:mc3h42a\u003c\/li\u003e\n\u003cli\u003eOther PCB markings:0J13654\u003c\/li\u003e\n\u003cli\u003eSize:32.5 mm x 56 mm\u003c\/li\u003e\n\u003cli\u003eWeight:8.5 g1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cb\u003eSpecifications for\u003c\/b\u003e\u003cb\u003ewith soldered stackable headers and terminal blocks:\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 3\u003c\/li\u003e\n\u003cli\u003eModel: Motoron M3H256\u003c\/li\u003e\n\u003cli\u003eControl interface: I2C\u003c\/li\u003e\n\u003cli\u003eMinimum operating voltage: 4.5 V\u003c\/li\u003e\n\u003cli\u003eMaximum operating voltage: 48 V2\u003c\/li\u003e\n\u003cli\u003eContinuous output current per channel: 2 A\u003c\/li\u003e\n\u003cli\u003ePeak output current per channel: 6.4 A\u003c\/li\u003e\n\u003cli\u003eReverse voltage protection?: Y3\u003c\/li\u003e\n\u003cli\u003eConnectors soldered?: Y\u003c\/li\u003e\n\u003cli\u003ePCB dev codes: mc3h42a\u003c\/li\u003e\n\u003cli\u003eOther PCB markings: 0J13654\u003c\/li\u003e\n\u003cli\u003eSize: 32.5 mm x 56 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14.5 g1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDocumentation:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrintable PDF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 xPololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eProducts ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs technical support available?\u003c\/summary\u003e\n\u003cp\u003eYes, 24\/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return policy?\u003c\/summary\u003e\n\u003cp\u003e7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003ch2\u003eBuy Pololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi Online in India\u003c\/h2\u003e\n\u003cp\u003ePurchase the \u003cstrong\u003ePololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi\u003c\/strong\u003e online at \u003ca href=\"https:\/\/theengineerstore.in\"\u003eThe Engineer Store\u003c\/a\u003e - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003ePololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi\u003c\/strong\u003e with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.\u003c\/p\u003e\n\u003cp\u003eLooking to buy \u003cstrong\u003ePololu 5035\/5034\/5033 Motoron M3H256 Triple Motor Controller for Raspberry Pi\u003c\/strong\u003e at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":43856838951075,"sku":"TES-EV00082377","price":3332.43,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/4479\/7091\/products\/0J11671.1200-228x228.jpg?v=1704281535","url":"https:\/\/www.theengineerstore.in\/zh-hant\/products\/pololu-5035-5034-5033-motoron-m3h256-triple-motor-controller-for-raspberry-pi","provider":"The Engineer Store","version":"1.0","type":"link"}