41% off
Voltage Sensor Module 25V
Accurately measure DC voltages up to 25V with this compact and reliable voltage sensor module, ideal for Arduino, ESP32, and microcontroller-based monitoring systems. From The Engineer Store, Bengaluru - fast shipping, 7-day warranty on manufacturing defects, and dedicated technical support.
Specifications
| Module Type | DC Voltage Sensor |
| Input Voltage Range | 0-25V DC |
| Output Voltage Range | 0-5V (analog output) |
| Voltage Detection Resolution | 0.00489V (with 10-bit ADC) |
| Voltage Divider Ratio | 5:1 (R1 = 30kOhm, R2 = 7.5kOhm) |
| Interface | 3-Pin Header (VCC, GND, Signal / S) |
| Compatible Platforms | Arduino, ESP32, ESP8266, Raspberry Pi, STM32 |
| Input Connector | Screw Terminal (2-pin) for voltage source |
| Operating Current | < 1mA (negligible load) |
| Dimensions | Approx. 40 x 14 x 12 mm |
| Weight | ~3g |
| Origin | Original / Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- Wide Measurement Range: Reads DC voltages from 0V to 25V with high accuracy using a precision resistor divider network.
- Microcontroller-Safe Output: Scales down input voltage to a 0-5V analog signal, safe for 5V ADC pins on Arduino and similar boards.
- Simple 3-Pin Interface: Connect directly to any analog input - Signal (S), VCC (+), and GND (-) for instant voltage readings.
- Screw Terminal Input: Secure screw terminal block for easy and reliable connection to the voltage source being measured.
- Ultra-Low Power Draw: High-impedance resistor divider draws negligible current, ensuring minimal impact on the circuit under test.
- Compact & Lightweight: Tiny form factor fits easily on breadboards, inside enclosures, or mounted on project PCBs.
- Universal Compatibility: Works seamlessly with Arduino Uno, Mega, Nano, ESP32, ESP8266, STM32, Raspberry Pi (with external ADC), and more.
- No External Components Needed: Ready to use out of the box - simply wire, upload a short sketch, and start measuring.
How It Works
The Voltage Sensor Module 25V uses a simple resistive voltage divider consisting of a 30kOhm and a 7.5kOhm resistor in series. When a DC voltage (up to 25V) is applied across the screw terminal input, the divider scales it down by a factor of 5, producing an output between 0V and 5V. This scaled output is fed to the analog pin of your microcontroller, which reads it via its built-in ADC. By multiplying the ADC reading by the divider ratio in your code, you can accurately reconstruct the original input voltage.
Pin Configuration
| Module Pin | Description | Connect To |
|---|---|---|
| S (Signal) | Analog voltage output (0-5V scaled) | Analog input pin (e.g., A0) |
| + (VCC) | Power supply positive | 5V on microcontroller |
| - (GND) | Ground reference | GND on microcontroller |
| Screw Terminal (+) | Positive of voltage to measure | Positive wire of source |
| Screw Terminal (-) | Negative / Ground of source | Negative wire of source |
Wiring Diagram (Arduino Example)
| Voltage Sensor Pin | Arduino Pin |
|---|---|
| S (Signal) | A0 |
| + (VCC) | 5V |
| - (GND) | GND |
| Screw Terminal | Connect to DC voltage source (0-25V) |
Sample Arduino Code
// Voltage Sensor Module 25V - Arduino Example
// Connect Signal pin to A0 const int sensorPin = A0;float voltageDividerRatio = 5.0; // 25V / 5V = 5:1 ratio
void setup() { Serial.begin(9600);Serial.println("Voltage Sensor Module 25V - Ready
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy Voltage Sensor Module 25V Online in India
Purchase the Voltage Sensor Module 25V online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Voltage Sensor Module 25V with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy Voltage Sensor Module 25V at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.
Voltage Sensor Module 25V
Accurately measure DC voltages up to 25V with this compact and reliable voltage sensor module, ideal for Arduino, ESP32, and microcontroller-based monitoring systems. From The Engineer Store, Bengaluru - fast shipping, 7-day warranty on manufacturing defects, and dedicated technical support.
Specifications
| Module Type | DC Voltage Sensor |
| Input Voltage Range | 0-25V DC |
| Output Voltage Range | 0-5V (analog output) |
| Voltage Detection Resolution | 0.00489V (with 10-bit ADC) |
| Voltage Divider Ratio | 5:1 (R1 = 30kOhm, R2 = 7.5kOhm) |
| Interface | 3-Pin Header (VCC, GND, Signal / S) |
| Compatible Platforms | Arduino, ESP32, ESP8266, Raspberry Pi, STM32 |
| Input Connector | Screw Terminal (2-pin) for voltage source |
| Operating Current | < 1mA (negligible load) |
| Dimensions | Approx. 40 x 14 x 12 mm |
| Weight | ~3g |
| Origin | Original / Authentic |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Key Features
- Wide Measurement Range: Reads DC voltages from 0V to 25V with high accuracy using a precision resistor divider network.
- Microcontroller-Safe Output: Scales down input voltage to a 0-5V analog signal, safe for 5V ADC pins on Arduino and similar boards.
- Simple 3-Pin Interface: Connect directly to any analog input - Signal (S), VCC (+), and GND (-) for instant voltage readings.
- Screw Terminal Input: Secure screw terminal block for easy and reliable connection to the voltage source being measured.
- Ultra-Low Power Draw: High-impedance resistor divider draws negligible current, ensuring minimal impact on the circuit under test.
- Compact & Lightweight: Tiny form factor fits easily on breadboards, inside enclosures, or mounted on project PCBs.
- Universal Compatibility: Works seamlessly with Arduino Uno, Mega, Nano, ESP32, ESP8266, STM32, Raspberry Pi (with external ADC), and more.
- No External Components Needed: Ready to use out of the box - simply wire, upload a short sketch, and start measuring.
How It Works
The Voltage Sensor Module 25V uses a simple resistive voltage divider consisting of a 30kOhm and a 7.5kOhm resistor in series. When a DC voltage (up to 25V) is applied across the screw terminal input, the divider scales it down by a factor of 5, producing an output between 0V and 5V. This scaled output is fed to the analog pin of your microcontroller, which reads it via its built-in ADC. By multiplying the ADC reading by the divider ratio in your code, you can accurately reconstruct the original input voltage.
Pin Configuration
| Module Pin | Description | Connect To |
|---|---|---|
| S (Signal) | Analog voltage output (0-5V scaled) | Analog input pin (e.g., A0) |
| + (VCC) | Power supply positive | 5V on microcontroller |
| - (GND) | Ground reference | GND on microcontroller |
| Screw Terminal (+) | Positive of voltage to measure | Positive wire of source |
| Screw Terminal (-) | Negative / Ground of source | Negative wire of source |
Wiring Diagram (Arduino Example)
| Voltage Sensor Pin | Arduino Pin |
|---|---|
| S (Signal) | A0 |
| + (VCC) | 5V |
| - (GND) | GND |
| Screw Terminal | Connect to DC voltage source (0-25V) |
Sample Arduino Code
// Voltage Sensor Module 25V - Arduino Example
// Connect Signal pin to A0 const int sensorPin = A0;float voltageDividerRatio = 5.0; // 25V / 5V = 5:1 ratio
void setup() { Serial.begin(9600);Serial.println("Voltage Sensor Module 25V - Ready
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy Voltage Sensor Module 25V Online in India
Purchase the Voltage Sensor Module 25V online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Voltage Sensor Module 25V with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy Voltage Sensor Module 25V at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.