M5Stack C3 Mate with Pin Headers

The M5Stack C3 Mate with Pin Headers is a compact ESP32-C3 based microcontroller development board featuring pre-soldered pin headers for immediate breadboard integration and rapid prototyping. IoT developers, embedded systems engineers, and electronics hobbyists use this board to build WiFi and Bluetooth-enabled applications with minimal setup time. This product solves the challenge of quick hardware integration by eliminating the need for header soldering while maintaining the full computational power of the ESP32-C3 processor.

Product Overview

The M5Stack C3 Mate combines the powerful ESP32-C3 single-core processor with integrated WiFi 6 and Bluetooth 5.0 connectivity in a breadboard-friendly form factor. The board operates at 160MHz with 400KB of SRAM and 384KB of ROM, providing sufficient resources for complex IoT applications, sensor data acquisition, and wireless communication protocols. The pre-soldered male pin headers on both sides enable direct integration with standard breadboards and jumper wires, eliminating the soldering step that typically delays prototyping cycles. This design approach maintains full compatibility with the M5Stack ecosystem while reducing hardware preparation time from hours to minutes.

The C3 Mate features dual USB Type-C connectors for programming and power delivery, supporting both UART and DFU programming modes for maximum flexibility. The board includes an onboard reset button, boot mode selector, and power management circuitry that accepts 5V USB input or external 3.3V supply. The GPIO pins are arranged in a standard 0.1-inch pitch pattern, making it compatible with standard prototyping breadboards and allowing seamless integration with analog sensors, digital modules, and communication peripherals. The compact 25mm x 48mm footprint makes it ideal for space-constrained IoT applications while maintaining accessibility to all 22 GPIO pins.

Key Specifications

Specification	Details
Product Type	ESP32-C3 Microcontroller Development Board with Pin Headers
Brand	M5Stack
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp
Processor	ESP32-C3 Single-Core 160MHz RISC-V
Memory	400KB SRAM, 384KB ROM, 4MB Flash Storage
Wireless Connectivity	WiFi 6 (802.11b/g/n/ax) and Bluetooth 5.0 LE
GPIO Pins	22 GPIO pins with analog and digital capabilities
Power Supply	5V USB Type-C or 3.3V external input
Operating Voltage	3.3V logic level
Dimensions	25mm x 48mm (breadboard compatible)
Pin Headers	Pre-soldered male headers on both sides

Key Features

• Pre-soldered Male Pin Headers: Ready-to-use breadboard integration without soldering, enabling immediate prototyping and reducing hardware preparation time by 90 percent
• Dual USB Type-C Connectors: Support both UART programming and DFU bootloader modes with simultaneous power delivery and data communication capabilities
• WiFi 6 and Bluetooth 5.0 LE: Dual wireless protocols enable IoT connectivity, mesh networking, and low-energy peripheral communication for battery-powered applications
• 22 Accessible GPIO Pins: Full pin header exposure with analog input, PWM output, SPI, I2C, and UART interfaces for comprehensive sensor and peripheral integration
• Compact Breadboard Form Factor: 25mm x 48mm dimensions fit standard prototyping breadboards while maintaining accessibility to all pins and connectors
• Boot Mode Selector: Physical button for easy switching between normal operation and DFU programming mode without requiring software tools

Applications and Use Cases

• IoT Sensor Networks: Deploy WiFi-connected temperature, humidity, and air quality sensors across buildings with real-time data transmission to cloud platforms using MQTT or HTTP protocols
• Home Automation Control Nodes: Build wireless smart home devices for lighting control, appliance management, and environmental monitoring with Bluetooth and WiFi connectivity for mobile app integration
• Wearable Device Development: Create Bluetooth LE wearables including fitness trackers, health monitoring devices, and smartwatch prototypes with low power consumption suitable for battery operation
• Industrial Equipment Monitoring: Implement predictive maintenance systems with vibration sensors, temperature monitoring, and wireless data logging for machinery diagnostics and remote supervision
• Educational Embedded Systems Projects: Teach IoT fundamentals, wireless communication protocols, and embedded Linux concepts with a platform that requires minimal hardware setup and supports multiple programming environments
• Rapid Prototyping and MVPs: Accelerate time-to-market for IoT product concepts by eliminating soldering requirements and providing immediate breadboard integration for functional prototypes

How to Use

Begin by connecting the M5Stack C3 Mate to your development computer via the USB Type-C connector. The board will automatically enumerate as a serial device. Install the ESP-IDF development framework or use the Arduino IDE with ESP32 board support package. Select the correct board type (ESP32-C3) and COM port in your IDE settings. If the board does not appear in DFU mode, press and hold the boot button while pressing the reset button to enter bootloader mode. Upload your firmware using either UART or DFU programming mode depending on your IDE configuration.

For breadboard integration, insert the pre-soldered male headers into your prototyping breadboard, ensuring proper alignment with the power rails. Connect your sensors and peripherals using jumper wires to the appropriate GPIO pins according to your application schematic. Configure GPIO pin modes in your firmware using digitalWrite, digitalRead, analogRead, or PWM functions depending on your sensor interface requirements. Utilize the WiFi and Bluetooth libraries available in the Arduino framework or ESP-IDF to establish wireless connectivity. Monitor serial output at 115200 baud rate using a terminal emulator to debug your application and verify sensor data transmission.

Frequently Asked Questions

What is the difference between M5Stack C3 Mate and other ESP32-C3 boards?

The M5Stack C3 Mate specifically features pre-soldered male pin headers on both sides, making it immediately breadboard-compatible without soldering. Most other ESP32-C3 boards either require header soldering or use different pin arrangements. The C3 Mate also includes dual USB Type-C connectors and is optimized for the M5Stack ecosystem, providing access to extensive libraries and community support specifically designed for this form factor.

Can I power the board from an external 3.3V supply instead of USB?

Yes, the M5Stack C3 Mate accepts 3.3V external power input through dedicated pins. This is useful for battery-powered applications or when integrating with existing power distribution systems. However, ensure your external power supply can provide at least 500mA during WiFi transmission peaks. The onboard voltage regulator is optimized for 5V USB input, so external 3.3V supplies should be well-regulated to prevent brownout conditions during high-current wireless operations.

What programming languages and frameworks are supported?

The M5Stack C3 Mate supports multiple programming environments including Arduino IDE with ESP32 board support, ESP-IDF (Espressif IoT Development Framework), MicroPython, and CircuitPython. The Arduino IDE provides the fastest learning curve for beginners, while ESP-IDF offers maximum control and optimization for production applications. M5Stack also provides proprietary UIFlow visual programming platform for graphical application development without coding.

How many analog inputs does the board have?

The ESP32-C3 processor includes 6 ADC channels with 12-bit resolution (0-4095 values). These analog inputs support voltage ranges from 0V to 3.3V, making them suitable for analog sensors like potentiometers, temperature sensors, and light sensors. The ADC supports sampling rates up to 200kHz, enabling real-time sensor data acquisition for control applications and data logging systems.

Is the board suitable for battery-powered applications?

Yes, the ESP32-C3 is specifically designed for low-power IoT applications. In deep sleep mode, the board consumes less than 50 microamps, making it suitable for battery-powered devices with months of operation on standard AA batteries. Bluetooth LE connectivity further reduces power consumption compared to WiFi-only alternatives. Implement sleep modes strategically in your firmware to maximize battery life while maintaining responsiveness to sensor events or wireless commands.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy M5Stack C3 Mate with Pin Headers Online in India

Purchase the M5Stack C3 Mate with Pin Headers online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on M5Stack C3 Mate with Pin Headers with fast shipping and expert support.

Our team in