21 % छूट
Mikroe LP WIFI CLICK
The Mikroe LP WIFI CLICK is a low-power WiFi connectivity module designed for IoT and embedded systems requiring efficient wireless communication with minimal power consumption. Electronics engineers, IoT developers, and embedded systems designers use this module to rapidly prototype and deploy WiFi-enabled applications without complex RF design. It solves the critical challenge of integrating reliable WiFi connectivity into battery-powered and energy-constrained devices while maintaining ease of integration through the standardized CLICK interface.
Product Overview
The Mikroe LP WIFI CLICK module integrates a high-performance WiFi transceiver optimized for low-power operation, featuring advanced power management circuitry that enables extended battery life in portable applications. The module operates on the 2.4 GHz ISM band with support for 802.11b/g/n standards, delivering robust wireless connectivity with configurable transmission power levels. The integrated antenna design eliminates the need for external RF components, reducing PCB complexity and design time. Communication with host microcontrollers occurs via UART interface at configurable baud rates, allowing seamless integration with any development platform.
What distinguishes the LP WIFI CLICK is its exceptional power efficiency architecture, featuring dynamic power scaling and sleep modes that reduce current consumption to microampere levels during idle states. The module includes built-in TCP/IP stack implementation, allowing developers to focus on application logic rather than network protocol complexity. The standardized CLICK form factor ensures compatibility with Mikroe development boards and click shields, accelerating prototyping cycles. Comprehensive firmware support and AT command set provide flexible configuration options for diverse connectivity scenarios from simple sensor data transmission to complex IoT gateway applications.
Key Specifications
| Specification | Details |
| Product Type | Low-Power WiFi Connectivity Module |
| Brand | Mikroe |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| WiFi Standard | 802.11b/g/n at 2.4 GHz ISM Band |
| Interface | UART Serial Communication |
| Power Supply | 3.3V DC with integrated voltage regulation |
| Operating Current | Active: 80-150mA, Sleep Mode: 10-50 microA |
| Data Rate | Up to 54 Mbps theoretical maximum |
| Form Factor | Mikroe CLICK Standard Module |
Key Features
- Ultra-Low Power Consumption with intelligent sleep modes reducing standby current to microampere levels, extending battery life in portable IoT devices
- Integrated TCP/IP Stack eliminating the need for external protocol implementation, reducing firmware complexity and development time
- UART-Based Communication providing simple serial interface compatible with any microcontroller platform without specialized drivers
- Standardized CLICK Interface ensuring plug-and-play compatibility with Mikroe development boards and rapid prototyping environments
- Configurable Transmission Power Levels allowing optimization between range requirements and power consumption for specific applications
- Built-in Antenna Design eliminating external RF components and reducing overall PCB footprint and design complexity
Applications and Use Cases
- Battery-Powered IoT Sensors in remote monitoring applications where devices must operate for months on single battery charge, utilizing low-power modes between data transmission intervals
- Wireless Environmental Monitoring Systems for temperature, humidity, and air quality sensing in smart buildings, farms, and industrial facilities requiring reliable WiFi connectivity
- Portable Medical Devices such as wearable health monitors and portable diagnostic equipment requiring secure WiFi communication with minimal power drain
- Smart Home Automation Nodes for lighting control, door locks, and appliance management where devices need WiFi connectivity without constant AC power availability
- Industrial IoT Gateway Applications for edge computing and data aggregation from multiple sensors, bridging local networks to cloud platforms
- Vehicle Telematics and Fleet Tracking Systems requiring periodic WiFi connectivity for data synchronization and location reporting
How to Use
Begin by inserting the Mikroe LP WIFI CLICK module into an available CLICK socket on your Mikroe development board, ensuring proper alignment of the connector pins. The module automatically receives 3.3V power from the CLICK interface. Connect your host microcontroller to the UART pins designated for the CLICK socket, configuring the serial port to the module's default baud rate of 115200 bps. Load the appropriate firmware image onto the module using Mikroe's bootloader utility, which handles the low-level configuration of the WiFi transceiver and TCP/IP stack.
Configure the module using AT commands transmitted over the UART interface to set WiFi SSID, authentication credentials, and IP addressing parameters. Implement event handlers in your firmware to respond to connection status changes, incoming data packets, and error conditions. Utilize the module's sleep mode commands to minimize power consumption during idle periods, waking the device via timer interrupts or external signals. The comprehensive AT command reference documentation provides detailed syntax for all operations from basic network scanning to advanced socket management and firmware updates. Test connectivity using ping commands and establish TCP/UDP socket connections to validate communication with remote servers before deploying in production environments.
Frequently Asked Questions
What is the actual power consumption during active WiFi transmission and in sleep mode?
During active WiFi transmission at full power, the module draws approximately 120-150mA at 3.3V. In configured sleep mode with periodic wake intervals, current consumption drops to 10-50 microamperes depending on the wake frequency and transmission duty cycle. This dramatic reduction enables battery-powered applications to achieve multi-month operational life. The exact consumption depends on your transmission power setting, WiFi standard used (802.11b consumes less than 802.11n), and the ratio of active to sleep time in your application.
Can I use this module with microcontrollers other than Mikroe platforms?
Yes, the LP WIFI CLICK communicates via standard UART serial protocol, making it compatible with any microcontroller platform including Arduino, STM32, PIC, ARM Cortex-M series, and others. You need to connect the UART TX and RX lines from the CLICK module to your microcontroller's serial port, provide 3.3V power supply, and implement AT command parsing in your firmware. We provide example code for popular platforms, and the AT command set is fully documented for custom implementations.
What security protocols does the module support for WiFi connections?
The module supports WEP, WPA, and WPA2 security protocols, with WPA2-PSK being the recommended standard for modern applications. It also supports open networks for development and testing purposes. The module handles encryption and decryption internally, requiring only the network credentials to be configured via AT commands. For enterprise networks using 802.1X authentication, additional configuration may be required through the advanced AT command set.
How do I update the firmware on the LP WIFI CLICK module?
Firmware updates are performed using Mikroe's dedicated bootloader utility available in the Mikroe IDE environment. Connect the module to your development computer via the CLICK interface, launch the firmware update tool, select the latest firmware image, and initiate the programming process. The bootloader handles all low-level flash memory management. Updates typically complete within 2-3 minutes. Always backup your current configuration before updating, as some firmware versions may reset stored settings.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Mikroe LP WIFI CLICK Online in India
Purchase the Mikroe LP WIFI CLICK online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Mikroe LP WIFI CLICK with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.
Mikroe LP WIFI CLICK
The Mikroe LP WIFI CLICK is a low-power WiFi connectivity module designed for IoT and embedded systems requiring efficient wireless communication with minimal power consumption. Electronics engineers, IoT developers, and embedded systems designers use this module to rapidly prototype and deploy WiFi-enabled applications without complex RF design. It solves the critical challenge of integrating reliable WiFi connectivity into battery-powered and energy-constrained devices while maintaining ease of integration through the standardized CLICK interface.
Product Overview
The Mikroe LP WIFI CLICK module integrates a high-performance WiFi transceiver optimized for low-power operation, featuring advanced power management circuitry that enables extended battery life in portable applications. The module operates on the 2.4 GHz ISM band with support for 802.11b/g/n standards, delivering robust wireless connectivity with configurable transmission power levels. The integrated antenna design eliminates the need for external RF components, reducing PCB complexity and design time. Communication with host microcontrollers occurs via UART interface at configurable baud rates, allowing seamless integration with any development platform.
What distinguishes the LP WIFI CLICK is its exceptional power efficiency architecture, featuring dynamic power scaling and sleep modes that reduce current consumption to microampere levels during idle states. The module includes built-in TCP/IP stack implementation, allowing developers to focus on application logic rather than network protocol complexity. The standardized CLICK form factor ensures compatibility with Mikroe development boards and click shields, accelerating prototyping cycles. Comprehensive firmware support and AT command set provide flexible configuration options for diverse connectivity scenarios from simple sensor data transmission to complex IoT gateway applications.
Key Specifications
| Specification | Details |
| Product Type | Low-Power WiFi Connectivity Module |
| Brand | Mikroe |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| WiFi Standard | 802.11b/g/n at 2.4 GHz ISM Band |
| Interface | UART Serial Communication |
| Power Supply | 3.3V DC with integrated voltage regulation |
| Operating Current | Active: 80-150mA, Sleep Mode: 10-50 microA |
| Data Rate | Up to 54 Mbps theoretical maximum |
| Form Factor | Mikroe CLICK Standard Module |
Key Features
- Ultra-Low Power Consumption with intelligent sleep modes reducing standby current to microampere levels, extending battery life in portable IoT devices
- Integrated TCP/IP Stack eliminating the need for external protocol implementation, reducing firmware complexity and development time
- UART-Based Communication providing simple serial interface compatible with any microcontroller platform without specialized drivers
- Standardized CLICK Interface ensuring plug-and-play compatibility with Mikroe development boards and rapid prototyping environments
- Configurable Transmission Power Levels allowing optimization between range requirements and power consumption for specific applications
- Built-in Antenna Design eliminating external RF components and reducing overall PCB footprint and design complexity
Applications and Use Cases
- Battery-Powered IoT Sensors in remote monitoring applications where devices must operate for months on single battery charge, utilizing low-power modes between data transmission intervals
- Wireless Environmental Monitoring Systems for temperature, humidity, and air quality sensing in smart buildings, farms, and industrial facilities requiring reliable WiFi connectivity
- Portable Medical Devices such as wearable health monitors and portable diagnostic equipment requiring secure WiFi communication with minimal power drain
- Smart Home Automation Nodes for lighting control, door locks, and appliance management where devices need WiFi connectivity without constant AC power availability
- Industrial IoT Gateway Applications for edge computing and data aggregation from multiple sensors, bridging local networks to cloud platforms
- Vehicle Telematics and Fleet Tracking Systems requiring periodic WiFi connectivity for data synchronization and location reporting
How to Use
Begin by inserting the Mikroe LP WIFI CLICK module into an available CLICK socket on your Mikroe development board, ensuring proper alignment of the connector pins. The module automatically receives 3.3V power from the CLICK interface. Connect your host microcontroller to the UART pins designated for the CLICK socket, configuring the serial port to the module's default baud rate of 115200 bps. Load the appropriate firmware image onto the module using Mikroe's bootloader utility, which handles the low-level configuration of the WiFi transceiver and TCP/IP stack.
Configure the module using AT commands transmitted over the UART interface to set WiFi SSID, authentication credentials, and IP addressing parameters. Implement event handlers in your firmware to respond to connection status changes, incoming data packets, and error conditions. Utilize the module's sleep mode commands to minimize power consumption during idle periods, waking the device via timer interrupts or external signals. The comprehensive AT command reference documentation provides detailed syntax for all operations from basic network scanning to advanced socket management and firmware updates. Test connectivity using ping commands and establish TCP/UDP socket connections to validate communication with remote servers before deploying in production environments.
Frequently Asked Questions
What is the actual power consumption during active WiFi transmission and in sleep mode?
During active WiFi transmission at full power, the module draws approximately 120-150mA at 3.3V. In configured sleep mode with periodic wake intervals, current consumption drops to 10-50 microamperes depending on the wake frequency and transmission duty cycle. This dramatic reduction enables battery-powered applications to achieve multi-month operational life. The exact consumption depends on your transmission power setting, WiFi standard used (802.11b consumes less than 802.11n), and the ratio of active to sleep time in your application.
Can I use this module with microcontrollers other than Mikroe platforms?
Yes, the LP WIFI CLICK communicates via standard UART serial protocol, making it compatible with any microcontroller platform including Arduino, STM32, PIC, ARM Cortex-M series, and others. You need to connect the UART TX and RX lines from the CLICK module to your microcontroller's serial port, provide 3.3V power supply, and implement AT command parsing in your firmware. We provide example code for popular platforms, and the AT command set is fully documented for custom implementations.
What security protocols does the module support for WiFi connections?
The module supports WEP, WPA, and WPA2 security protocols, with WPA2-PSK being the recommended standard for modern applications. It also supports open networks for development and testing purposes. The module handles encryption and decryption internally, requiring only the network credentials to be configured via AT commands. For enterprise networks using 802.1X authentication, additional configuration may be required through the advanced AT command set.
How do I update the firmware on the LP WIFI CLICK module?
Firmware updates are performed using Mikroe's dedicated bootloader utility available in the Mikroe IDE environment. Connect the module to your development computer via the CLICK interface, launch the firmware update tool, select the latest firmware image, and initiate the programming process. The bootloader handles all low-level flash memory management. Updates typically complete within 2-3 minutes. Always backup your current configuration before updating, as some firmware versions may reset stored settings.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Mikroe LP WIFI CLICK Online in India
Purchase the Mikroe LP WIFI CLICK online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Mikroe LP WIFI CLICK with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.