Radiolink AT10 2.4GHz 12CH RC Drone Remote with PRM-01 Transmitter and R12DS Receiver

The Radiolink AT10 is a professional-grade 2.4GHz 12-channel RC transmitter system designed for advanced drone control, featuring the PRM-01 transmitter module and R12DS receiver for reliable long-range communication. This system is widely used by professional drone operators, aerial photographers, and industrial UAV technicians who require precise multi-channel control with minimal latency and maximum range. The AT10 solves the critical challenge of maintaining stable, interference-free communication with complex multi-rotor aircraft and fixed-wing drones in demanding operational environments.

Product Overview

The Radiolink AT10 operates on the 2.4GHz frequency band using FHSS (Frequency Hopping Spread Spectrum) technology, which provides automatic frequency selection across 50 channels to avoid interference from Wi-Fi, Bluetooth, and other wireless devices. The system delivers 12 independent control channels through the PRM-01 transmitter module, allowing simultaneous control of main rotor, tail rotor, throttle, pitch, roll, yaw, and up to 6 additional auxiliary functions such as camera gimbal, payload release, or flight mode switching. The R12DS receiver integrates a 6-axis gyroscope and accelerometer, enabling intelligent stabilization assistance and fail-safe protocols that automatically return the aircraft to home position or execute safe landing sequences if signal loss occurs.

The AT10 system features a maximum transmission range of 2.4 kilometers in open terrain with line-of-sight, supported by dual antenna diversity reception on the receiver module for optimal signal strength. The transmitter utilizes a rechargeable lithium polymer battery with approximately 10-12 hours of flight time per charge, while the receiver operates on standard servo power rails (4.8V to 6V). The system supports both PPM (Pulse Position Modulation) and PWM (Pulse Width Modulation) output formats, making it compatible with a wide range of flight controllers including Pixhawk, APM, and various third-party autopilot systems used in professional surveying, mapping, and inspection applications.

Key Specifications

Specification	Details
Product Type	2.4GHz 12-Channel RC Transmitter System
Brand	Radiolink
Origin	Original/Authentic
Warranty	7 days on manufacturing defects
Shipping	1-5 days from Bengaluru
Delivery	7-8 days across India
Support	24/7 via Email and WhatsApp
Frequency Band	2.4GHz FHSS with 50-channel auto-hopping
Control Channels	12 independent channels
Maximum Range	2.4 kilometers line-of-sight
Receiver Type	R12DS with 6-axis gyro and accelerometer
Output Formats	PPM and PWM compatible
Transmitter Battery	Rechargeable lithium polymer, 10-12 hour flight time

Key Features

• 12-Channel Independent Control: Simultaneous operation of main rotor, tail rotor, throttle, pitch, roll, yaw, and 6 auxiliary functions for gimbal, payload, and flight mode management
• 2.4GHz FHSS Technology: Automatic frequency hopping across 50 channels eliminates interference from Wi-Fi, Bluetooth, and cellular networks in urban and industrial environments
• Dual Antenna Diversity Reception: R12DS receiver features dual antennas with intelligent signal selection for maximum range and reliability in challenging RF environments
• Integrated Stabilization Assistance: 6-axis gyroscope and accelerometer on receiver enables real-time attitude correction and fail-safe automatic landing protocols
• Extended Range Operation: 2.4-kilometer maximum transmission range supports professional surveying, mapping, and inspection missions over large areas
• Multi-Protocol Compatibility: PPM and PWM output formats work seamlessly with Pixhawk, APM, ArduCopter, and third-party flight controllers
• Rechargeable Transmitter Battery: Integrated lithium polymer battery provides 10-12 hours of continuous operation per charge cycle
• Compact Ergonomic Design: Lightweight transmitter with intuitive stick layout and programmable trim controls for comfortable extended operation

Applications and Use Cases

• Aerial Photography and Videography: 12-channel control enables simultaneous drone flight and 3-axis gimbal stabilization for professional cinematography with smooth camera movements and precise framing
• Agricultural Drone Operations: Multi-channel payload control supports precision spraying, seeding, and crop monitoring with independent throttle management and pesticide dispersal systems on large-scale farms
• Industrial Inspection and Surveying: Extended 2.4km range enables inspection of power lines, cell towers, bridges, and infrastructure without line-of-sight limitations, with failsafe protocols ensuring safe recovery
• Search and Rescue Operations: Reliable 12-channel control and fail-safe landing protocols make the AT10 ideal for emergency response teams deploying thermal imaging and communication relay systems
• Mapping and Photogrammetry: PPM output compatibility with autonomous flight controllers enables pre-programmed survey missions with precise waypoint navigation and automated image capture
• Racing and FPV Applications: Low-latency 12-channel response supports competitive drone racing with real-time control adjustments and auxiliary channel management for video transmission systems

How to Use

Begin setup by binding the R12DS receiver to the PRM-01 transmitter module through the dedicated bind button on both units, typically requiring 3-5 seconds of held contact to establish secure pairing. Once bound, connect the R12DS receiver to your flight controller via PPM or PWM output connectors, ensuring proper voltage supply between 4.8V and 6V from your aircraft battery or dedicated receiver power module. Calibrate the transmitter stick ranges and trim settings using your flight controller's configuration software, testing each of the 12 channels individually to verify full range of motion from minimum to maximum values without dead zones or signal loss.

Before flight operations, perform a comprehensive range check in an open area by walking 50 meters away while monitoring signal strength indicators on your transmitter display, confirming stable control input response at extended distances. Program fail-safe actions such as throttle cut or return-to-home through your flight controller settings, ensuring the system automatically executes safe landing protocols if signal loss exceeds 1-2 seconds. Charge the transmitter battery fully before each flight session using the provided USB charging cable, and always verify receiver antenna orientation is perpendicular to the fuselage for optimal signal reception during flight operations.

Frequently Asked Questions

What is the difference between PPM and PWM output modes on the R12DS receiver?

PPM (Pulse Position Modulation) encodes all 12 channels into a single serial signal on one wire, reducing wiring complexity and ideal for flight controllers with limited input pins like Pixhawk autopilots. PWM (Pulse Width Modulation) outputs each channel on separate wires, providing redundancy and compatibility with traditional servo controllers, though requiring more connection points. The R12DS receiver supports both formats simultaneously, allowing you to choose based on your specific flight controller requirements.

How do I extend the transmission range beyond 2.4 kilometers?

The 2.4-kilometer range specification is the maximum achievable under ideal conditions with clear line-of-sight and minimal RF interference. To optimize range in real-world conditions, ensure receiver antennas are oriented perpendicular to each other and away from the aircraft frame, use high-gain directional antennas if available, and avoid flying near high-power RF sources like radar or cellular towers. Range degradation occurs in urban environments due to multipath interference from buildings, so maintain visual line-of-sight for safety regardless of theoretical maximum range.

Can I use the AT10 system with multiple aircraft or switch between different drones?

Yes, the AT10 transmitter can bind with multiple R12DS receivers through the binding procedure, allowing you to switch between different aircraft by re-binding to the desired receiver. However, only one receiver can be active at a time per transmitter. For professional operations managing multiple aircraft, you would need separate AT10 transmitter systems to avoid frequency conflicts and ensure reliable independent control of each drone.

What failsafe options are available if signal loss occurs during flight?

The R12DS receiver supports multiple failsafe protocols configurable through your flight controller: throttle cut (immediate motor shutdown), return-to-home (autonomous navigation to launch point), or hold last command (maintains previous control inputs). Signal loss detection typically triggers after 1-2 seconds of no received data, providing a safety margin for temporary signal interruptions while preventing uncontrolled flight in case of permanent signal loss. Always test failsafe behavior in controlled conditions before operational flights.

Is the AT10 system compatible with my specific flight controller?

The R12DS receiver outputs both PPM and PWM formats, making it compatible with virtually all modern flight controllers including Pixhawk, APM, Betaflight, Cleanflight, and ArduCopter platforms. Verify your flight controller has available PPM or PWM input pins, and consult your controller's documentation for proper connection procedures. Contact our technical support team with your specific flight controller model for detailed integration guidance.

When will I receive my order?

Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.

What is your return and warranty policy?

We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.

Why Buy from The Engineer Store

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy Radiolink AT10 2.4GHz 12CH RC Drone Remote with PRM-01 Transmitter and R12DS Receiver Online in India

Purchase the Radiolink AT10 2.4GHz 12CH RC Drone Remote with PRM-01 Transmitter and R12DS Receiver online at The Engineer Store, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.