आपकी गाड़ी

आपकी गाड़ी खाली है

बिक्री

SmartElex Load Cell Amplifier - HX711

द्वारा The Engineer Store
SKU: R101046
नियमित रूप से मूल्य Rs. 169.60 Rs. 100.74 41 % छूट
यूनिट मूल्य
प्रति
कोई समीक्षा नहीं

SmartElex Load Cell Amplifier - HX711

The SmartElex Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.
This version of the SmartElex Load Cell Amplifier features a few changes that you specifically asked for! We have separated the analog and digital supply, as well as added a 3.3uH inductor and a 0.1uF filter capacitor for digital supply. Need even more? Checkout the SparkFun Qwiic Scale. It has all the features of the HX711 but with additional library support, a true I2C interface, and no soldering required!
The HX711 uses a two-wire interface (Clock and Data) for communication. Any microcontroller's GPIO pins should work, and numerous libraries have been written, making it easy to read data from the HX711.
Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN and YLW. Each color corresponds to the conventional color coding of load cells:

  •  Red (Excitation+ or VCC)
  •  Black (Excitation- or GND)
  •  White (Amplifier-, Signal- or Output-)
  •  Green (A+, S+ or O+)
  •  Yellow (Shield)

The YLW pin acts as an optional input that is not hooked up to the strain gauge but is utilized to ground and shield against outside EMI (electromagnetic interference). Please keep in mind that some load cells might have slight variations in color coding.


Features

  1. Operation Voltage: 2.7V-5V
  2. Operation Current: < 1.5mA
  3. Selectable 10SPS or 80SPS output data rate
  4. Simultaneous 50 and 60Hz supply rejection

Shop online at The Engineer Store - India's trusted electronics components store. Fast delivery across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, and Pune.

Frequently Asked Questions

When will I receive my order?

Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.

Is technical support available?

Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.

What is your return policy?

7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.

Buy SmartElex Load Cell Amplifier - HX711 Online in India

Purchase the SmartElex Load Cell Amplifier - HX711 online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on SmartElex Load Cell Amplifier - HX711 with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.

Looking to buy SmartElex Load Cell Amplifier - HX711 at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.

बिक्री

SmartElex Load Cell Amplifier - HX711

द्वारा The Engineer Store
SKU: R101046
नियमित रूप से मूल्य Rs. 169.60 Rs. 100.74 41 % छूट
यूनिट मूल्य
प्रति
कोई समीक्षा नहीं
भुगतान सुरक्षित
उपलब्धता
 
(कार्ट में 0)
शिपिंग की गणना चेकआउट के समय की जाती है।

आपको यह भी पसंद आ सकता हैं

SmartElex Load Cell Amplifier - HX711

The SmartElex Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.
This version of the SmartElex Load Cell Amplifier features a few changes that you specifically asked for! We have separated the analog and digital supply, as well as added a 3.3uH inductor and a 0.1uF filter capacitor for digital supply. Need even more? Checkout the SparkFun Qwiic Scale. It has all the features of the HX711 but with additional library support, a true I2C interface, and no soldering required!
The HX711 uses a two-wire interface (Clock and Data) for communication. Any microcontroller's GPIO pins should work, and numerous libraries have been written, making it easy to read data from the HX711.
Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN and YLW. Each color corresponds to the conventional color coding of load cells:

  •  Red (Excitation+ or VCC)
  •  Black (Excitation- or GND)
  •  White (Amplifier-, Signal- or Output-)
  •  Green (A+, S+ or O+)
  •  Yellow (Shield)

The YLW pin acts as an optional input that is not hooked up to the strain gauge but is utilized to ground and shield against outside EMI (electromagnetic interference). Please keep in mind that some load cells might have slight variations in color coding.


Features

  1. Operation Voltage: 2.7V-5V
  2. Operation Current: < 1.5mA
  3. Selectable 10SPS or 80SPS output data rate
  4. Simultaneous 50 and 60Hz supply rejection

Shop online at The Engineer Store - India's trusted electronics components store. Fast delivery across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, and Pune.

Frequently Asked Questions

When will I receive my order?

Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.

Is technical support available?

Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.

What is your return policy?

7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.

Are bulk discounts available?

Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.

Buy SmartElex Load Cell Amplifier - HX711 Online in India

Purchase the SmartElex Load Cell Amplifier - HX711 online at The Engineer Store - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on SmartElex Load Cell Amplifier - HX711 with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.

Looking to buy SmartElex Load Cell Amplifier - HX711 at the best price in India? The Engineer Store offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.