Sale
Arducam B0279 IMX477 HQ Camera Board, 12.3MP Camera Board for Nvidia Jetson Nano/Xavier NX, Raspberry Pi Compute Module
by
My Store
SKU: TES-EV00082116
35% off
Arducam B0279 IMX477 HQ Camera Board, 12.3MP Camera Board for Nvidia Jetson Nano/Xavier NX, Raspberry Pi Compute Module
- A Can’t-Miss Update to IMX219 – Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P. NOTE:
- Accelerated by Jetson Hardware ISP Engine – Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
- Only a driver away from Plug-and-Play – The Raspberry Pi HQ camera module requires hardware modification before installing the Jetson driver, which could bring potential damage and void the warranty. Ours don’t.
- 4-Lane Camera for the Future – Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates.
Arducam just released this High Quality camera module for Jetson Nano/Xavier NX, an camera board with 3 hole pitches. You can use this camera module on Jetson Nano/Xavier NX natively with ISP features. No hardware modifications required, just install the driver and you are good to go.
★KERNEL CAMERA DRIVER USED
This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.
★ SUPPORTED PLATFORM DISCLAIMER
This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.
★ADDITIONAL ACCESSORY INSTRUCTIONS
The 22-22pin FFC Cable is included in the package. But please note that: If you are using an AGX Orin, an additional camera adapter (B0473) is also required.
Specifications
Camera
| Still Resolution | 12.3 Megapixels |
| Video Modes | NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: L4t 32.x: 4032x3040@30fps, 3840x2160@30fps, 1920x1080@60fps L4t 35.x: 4032x3040@20fps, 3840x2160@30fps, 1920x1080@60fps |
| Sensor Resolution | 4056 x 3040 pixels |
| Sensor image area | 6.287mm x 4.712 mm (7.9mm diagonal) |
| Pixel Size | 1.55 µm x 1.55 µm |
| Optical Size | 1/2.3" |
| IR Sensitivity | Integral IR-cut Filter, visible light only |
Electrical & Mechanical
| Camera Board Size | 38 × 38mm |
Arducam B0279 IMX477 HQ Camera Board, 12.3MP Camera Board for Nvidia Jetson Nano/Xavier NX, Raspberry Pi Compute Module
- A Can’t-Miss Update to IMX219 – Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P. NOTE:
- Accelerated by Jetson Hardware ISP Engine – Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
- Only a driver away from Plug-and-Play – The Raspberry Pi HQ camera module requires hardware modification before installing the Jetson driver, which could bring potential damage and void the warranty. Ours don’t.
- 4-Lane Camera for the Future – Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates.
Arducam just released this High Quality camera module for Jetson Nano/Xavier NX, an camera board with 3 hole pitches. You can use this camera module on Jetson Nano/Xavier NX natively with ISP features. No hardware modifications required, just install the driver and you are good to go.
★KERNEL CAMERA DRIVER USED
This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.
★ SUPPORTED PLATFORM DISCLAIMER
This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.
★ADDITIONAL ACCESSORY INSTRUCTIONS
The 22-22pin FFC Cable is included in the package. But please note that: If you are using an AGX Orin, an additional camera adapter (B0473) is also required.
Specifications
Camera
| Still Resolution | 12.3 Megapixels |
| Video Modes | NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: L4t 32.x: 4032x3040@30fps, 3840x2160@30fps, 1920x1080@60fps L4t 35.x: 4032x3040@20fps, 3840x2160@30fps, 1920x1080@60fps |
| Sensor Resolution | 4056 x 3040 pixels |
| Sensor image area | 6.287mm x 4.712 mm (7.9mm diagonal) |
| Pixel Size | 1.55 µm x 1.55 µm |
| Optical Size | 1/2.3" |
| IR Sensitivity | Integral IR-cut Filter, visible light only |
Electrical & Mechanical
| Camera Board Size | 38 × 38mm |