22% off
Pultruded Carbon Fiber Rod (Solid) 6mm * 1000mm (Pack of 2)
The Pultruded Carbon Fiber Rod is a high-strength, lightweight structural component manufactured through continuous pultrusion process, delivering consistent fiber-to-resin ratio and superior mechanical properties. Engineers and manufacturers rely on these solid rods for precision applications requiring exceptional stiffness-to-weight ratios, corrosion resistance, and dimensional stability in aerospace, robotics, and mechanical engineering projects. This product solves the critical challenge of sourcing reliable carbon fiber components that maintain structural integrity under high tensile and compressive loads while eliminating concerns about galvanic corrosion and material degradation in harsh environments.
Product Overview
Pultruded carbon fiber rods are manufactured through a continuous pultrusion process where carbon fiber strands are drawn through a resin bath and then through a heated die, creating a composite with unidirectional fiber alignment and exceptional longitudinal strength. This manufacturing method ensures uniform cross-sectional properties, minimal void content, and consistent material characteristics throughout the 1000mm length. The 6mm diameter solid rod configuration provides optimal balance between structural capacity and ease of machining, making it ideal for custom fabrication, component assembly, and structural reinforcement applications across multiple engineering disciplines.
What distinguishes this pultruded carbon fiber rod is its superior surface finish, dimensional tolerance of ±0.2mm, and the pack of 2 units providing redundancy and cost efficiency for prototype development or small-batch manufacturing. The solid construction eliminates hollow sections that could trap moisture or resin, ensuring long-term durability in both indoor laboratory environments and outdoor industrial applications. With a tensile strength exceeding 1200 MPa and modulus of approximately 120 GPa, these rods deliver performance comparable to steel at one-fifth the weight, making them essential for weight-critical aerospace components, drone frames, and precision instrumentation supports.
Key Specifications
| Specification | Details |
| Product Type | Pultruded Solid Carbon Fiber Rod |
| Diameter | 6mm |
| Length | 1000mm |
| Pack Quantity | 2 units |
| Material Composition | Carbon Fiber Reinforced Polymer (CFRP) with epoxy resin |
| Tensile Strength | 1200+ MPa |
| Elastic Modulus | 120 GPa |
| Density | 1.6 g/cm3 |
| Fiber Volume Fraction | 60-65% |
| Dimensional Tolerance | ±0.2mm |
| Surface Finish | Smooth, machining-ready |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- Exceptional strength-to-weight ratio with tensile strength of 1200+ MPa enables structural applications previously requiring heavier aluminum or steel components, reducing overall system mass by up to 80%
- Unidirectional fiber alignment through pultrusion process ensures consistent mechanical properties along the rod length with minimal variation, critical for precision engineering and load-bearing applications
- Superior dimensional tolerance of ±0.2mm and smooth surface finish allow direct integration into assemblies without additional machining, reducing production time and costs for custom fabrications
- Complete corrosion resistance and non-magnetic properties eliminate concerns about galvanic coupling, rust formation, and electromagnetic interference in marine, chemical processing, and sensitive electronics environments
- High modulus of 120 GPa provides exceptional rigidity and low deflection under load, essential for precision instrumentation supports, optical benches, and structural reinforcement in aerospace applications
- Pack of 2 units offers redundancy for prototype development, comparative testing, and small-batch manufacturing while providing cost efficiency compared to individual rod purchases
Applications and Use Cases
- Aerospace structural components and drone frame construction where weight reduction directly improves payload capacity and flight endurance, with carbon fiber rods replacing aluminum spars and booms
- Precision robotics and automation equipment where low mass and high stiffness improve dynamic response, acceleration capabilities, and positioning accuracy in multi-axis systems and collaborative robots
- Optical and scientific instrumentation mounting where non-magnetic properties and dimensional stability prevent measurement errors and electromagnetic interference in sensitive laboratory environments
- Marine and offshore applications including fishing rod blanks, boat structural reinforcement, and corrosion-resistant fastening elements where traditional metals would require expensive coatings or stainless steel alternatives
- Automotive and motorsports lightweight chassis components, suspension links, and anti-roll bars where carbon fiber rods reduce unsprung mass and improve handling characteristics
- Medical device frames and surgical instrument handles where biocompatibility, non-magnetic properties, and sterilization resistance meet stringent healthcare equipment standards
How to Use
Begin by inspecting both carbon fiber rods for any surface damage or manufacturing defects before integration into your project. Measure and mark cutting points using a fine-tipped marker, then cut using a carbide-tipped saw or specialized composite cutting tool at moderate speeds with light pressure to prevent splintering and delamination. Sand cut edges with 220-grit sandpaper to remove burrs and create clean surfaces suitable for adhesive bonding or mechanical fastening. For drilling, use carbide drill bits at reduced speeds (500-1500 RPM depending on drill diameter) with appropriate cutting fluid to minimize fiber tear-out and maintain hole dimensional accuracy.
When machining the 6mm solid rod, secure it firmly in a lathe or milling machine using soft jaws or composite-specific clamping fixtures that distribute pressure evenly without causing stress concentrations. Apply light cuts with sharp tools, maintaining coolant flow to dissipate heat and extend tool life while preventing resin degradation. For adhesive bonding, lightly abrade the bonding surface with 150-grit sandpaper to improve mechanical interlocking with epoxy or polyurethane adhesives. When using mechanical fasteners, drill pilot holes slightly undersized and use washers to distribute clamping loads and prevent localized crushing of the composite material. Store unused rods in a cool, dry environment away from direct sunlight to prevent UV degradation and maintain long-term material properties.
Frequently Asked Questions
What is the difference between pultruded and other carbon fiber manufacturing methods?
Pultrusion creates continuous unidirectional fiber alignment through a die, producing rods with superior longitudinal strength and consistency compared to hand-laid or filament-wound methods. This process delivers 60-65% fiber volume fraction with minimal voids, resulting in superior mechanical properties and dimensional accuracy. Pultruded rods are ideal for applications requiring consistent properties along the length, while other methods offer better multi-directional strength but less uniformity.
Can I machine or drill this carbon fiber rod?
Yes, pultruded carbon fiber rods are fully machinable using standard tools with carbide tips at reduced speeds. Use 500-1500 RPM for drilling depending on bit diameter, apply light pressure, and use cutting fluid to prevent fiber tear-out. For turning operations on a lathe, secure the rod firmly and take shallow cuts with sharp tools. Always wear safety equipment as carbon fiber dust can be harmful if inhaled. Cut edges should be sanded smooth to remove burrs and prevent splintering.
What is the weight of this carbon fiber rod pack?
Each 6mm diameter pultruded carbon fiber rod weighs approximately 45-50 grams (1000mm length), making the pack of 2 units total weight around 90-100 grams. This represents approximately 1/5th the weight of equivalent steel rods and 1/3rd the weight of aluminum rods of similar diameter, providing significant weight savings in aerospace, robotics, and portable equipment applications.
Is this carbon fiber rod suitable for load-bearing structural applications?
Yes, with tensile strength exceeding 1200 MPa and modulus of 120 GPa, this solid 6mm rod is suitable for load-bearing applications where the load is primarily along the rod axis. Calculate load capacity using tensile strength divided by appropriate safety factor (typically 3-5 for structural applications). For complex multi-directional loading, consult engineering references or perform FEA analysis to ensure adequate safety margins under your specific application conditions.
How should I store these carbon fiber rods long-term?
Store pultruded carbon fiber rods in a cool, dry environment at temperatures between 15-25°C with relative humidity below 60%. Keep rods away from direct sunlight, UV radiation, and sources of heat that could degrade the epoxy resin matrix. Store vertically in a rack or horizontally on padded supports to prevent bending stress. Avoid contact with solvents, strong chemicals, and moisture. Properly stored rods maintain their mechanical properties indefinitely without degradation.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Pultruded Carbon Fiber Rod (Solid) 6mm * 1000mm (Pack of 2) Online in India
Purchase the Pultruded Carbon Fiber Rod (Solid) 6mm * 1000mm (Pack of 2) online at The Engineer Store, India's trusted source for genuine electronics and engineering components. We deliver across Bengaluru
Pultruded Carbon Fiber Rod (Solid) 6mm * 1000mm (Pack of 2)
The Pultruded Carbon Fiber Rod is a high-strength, lightweight structural component manufactured through continuous pultrusion process, delivering consistent fiber-to-resin ratio and superior mechanical properties. Engineers and manufacturers rely on these solid rods for precision applications requiring exceptional stiffness-to-weight ratios, corrosion resistance, and dimensional stability in aerospace, robotics, and mechanical engineering projects. This product solves the critical challenge of sourcing reliable carbon fiber components that maintain structural integrity under high tensile and compressive loads while eliminating concerns about galvanic corrosion and material degradation in harsh environments.
Product Overview
Pultruded carbon fiber rods are manufactured through a continuous pultrusion process where carbon fiber strands are drawn through a resin bath and then through a heated die, creating a composite with unidirectional fiber alignment and exceptional longitudinal strength. This manufacturing method ensures uniform cross-sectional properties, minimal void content, and consistent material characteristics throughout the 1000mm length. The 6mm diameter solid rod configuration provides optimal balance between structural capacity and ease of machining, making it ideal for custom fabrication, component assembly, and structural reinforcement applications across multiple engineering disciplines.
What distinguishes this pultruded carbon fiber rod is its superior surface finish, dimensional tolerance of ±0.2mm, and the pack of 2 units providing redundancy and cost efficiency for prototype development or small-batch manufacturing. The solid construction eliminates hollow sections that could trap moisture or resin, ensuring long-term durability in both indoor laboratory environments and outdoor industrial applications. With a tensile strength exceeding 1200 MPa and modulus of approximately 120 GPa, these rods deliver performance comparable to steel at one-fifth the weight, making them essential for weight-critical aerospace components, drone frames, and precision instrumentation supports.
Key Specifications
| Specification | Details |
| Product Type | Pultruded Solid Carbon Fiber Rod |
| Diameter | 6mm |
| Length | 1000mm |
| Pack Quantity | 2 units |
| Material Composition | Carbon Fiber Reinforced Polymer (CFRP) with epoxy resin |
| Tensile Strength | 1200+ MPa |
| Elastic Modulus | 120 GPa |
| Density | 1.6 g/cm3 |
| Fiber Volume Fraction | 60-65% |
| Dimensional Tolerance | ±0.2mm |
| Surface Finish | Smooth, machining-ready |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- Exceptional strength-to-weight ratio with tensile strength of 1200+ MPa enables structural applications previously requiring heavier aluminum or steel components, reducing overall system mass by up to 80%
- Unidirectional fiber alignment through pultrusion process ensures consistent mechanical properties along the rod length with minimal variation, critical for precision engineering and load-bearing applications
- Superior dimensional tolerance of ±0.2mm and smooth surface finish allow direct integration into assemblies without additional machining, reducing production time and costs for custom fabrications
- Complete corrosion resistance and non-magnetic properties eliminate concerns about galvanic coupling, rust formation, and electromagnetic interference in marine, chemical processing, and sensitive electronics environments
- High modulus of 120 GPa provides exceptional rigidity and low deflection under load, essential for precision instrumentation supports, optical benches, and structural reinforcement in aerospace applications
- Pack of 2 units offers redundancy for prototype development, comparative testing, and small-batch manufacturing while providing cost efficiency compared to individual rod purchases
Applications and Use Cases
- Aerospace structural components and drone frame construction where weight reduction directly improves payload capacity and flight endurance, with carbon fiber rods replacing aluminum spars and booms
- Precision robotics and automation equipment where low mass and high stiffness improve dynamic response, acceleration capabilities, and positioning accuracy in multi-axis systems and collaborative robots
- Optical and scientific instrumentation mounting where non-magnetic properties and dimensional stability prevent measurement errors and electromagnetic interference in sensitive laboratory environments
- Marine and offshore applications including fishing rod blanks, boat structural reinforcement, and corrosion-resistant fastening elements where traditional metals would require expensive coatings or stainless steel alternatives
- Automotive and motorsports lightweight chassis components, suspension links, and anti-roll bars where carbon fiber rods reduce unsprung mass and improve handling characteristics
- Medical device frames and surgical instrument handles where biocompatibility, non-magnetic properties, and sterilization resistance meet stringent healthcare equipment standards
How to Use
Begin by inspecting both carbon fiber rods for any surface damage or manufacturing defects before integration into your project. Measure and mark cutting points using a fine-tipped marker, then cut using a carbide-tipped saw or specialized composite cutting tool at moderate speeds with light pressure to prevent splintering and delamination. Sand cut edges with 220-grit sandpaper to remove burrs and create clean surfaces suitable for adhesive bonding or mechanical fastening. For drilling, use carbide drill bits at reduced speeds (500-1500 RPM depending on drill diameter) with appropriate cutting fluid to minimize fiber tear-out and maintain hole dimensional accuracy.
When machining the 6mm solid rod, secure it firmly in a lathe or milling machine using soft jaws or composite-specific clamping fixtures that distribute pressure evenly without causing stress concentrations. Apply light cuts with sharp tools, maintaining coolant flow to dissipate heat and extend tool life while preventing resin degradation. For adhesive bonding, lightly abrade the bonding surface with 150-grit sandpaper to improve mechanical interlocking with epoxy or polyurethane adhesives. When using mechanical fasteners, drill pilot holes slightly undersized and use washers to distribute clamping loads and prevent localized crushing of the composite material. Store unused rods in a cool, dry environment away from direct sunlight to prevent UV degradation and maintain long-term material properties.
Frequently Asked Questions
What is the difference between pultruded and other carbon fiber manufacturing methods?
Pultrusion creates continuous unidirectional fiber alignment through a die, producing rods with superior longitudinal strength and consistency compared to hand-laid or filament-wound methods. This process delivers 60-65% fiber volume fraction with minimal voids, resulting in superior mechanical properties and dimensional accuracy. Pultruded rods are ideal for applications requiring consistent properties along the length, while other methods offer better multi-directional strength but less uniformity.
Can I machine or drill this carbon fiber rod?
Yes, pultruded carbon fiber rods are fully machinable using standard tools with carbide tips at reduced speeds. Use 500-1500 RPM for drilling depending on bit diameter, apply light pressure, and use cutting fluid to prevent fiber tear-out. For turning operations on a lathe, secure the rod firmly and take shallow cuts with sharp tools. Always wear safety equipment as carbon fiber dust can be harmful if inhaled. Cut edges should be sanded smooth to remove burrs and prevent splintering.
What is the weight of this carbon fiber rod pack?
Each 6mm diameter pultruded carbon fiber rod weighs approximately 45-50 grams (1000mm length), making the pack of 2 units total weight around 90-100 grams. This represents approximately 1/5th the weight of equivalent steel rods and 1/3rd the weight of aluminum rods of similar diameter, providing significant weight savings in aerospace, robotics, and portable equipment applications.
Is this carbon fiber rod suitable for load-bearing structural applications?
Yes, with tensile strength exceeding 1200 MPa and modulus of 120 GPa, this solid 6mm rod is suitable for load-bearing applications where the load is primarily along the rod axis. Calculate load capacity using tensile strength divided by appropriate safety factor (typically 3-5 for structural applications). For complex multi-directional loading, consult engineering references or perform FEA analysis to ensure adequate safety margins under your specific application conditions.
How should I store these carbon fiber rods long-term?
Store pultruded carbon fiber rods in a cool, dry environment at temperatures between 15-25°C with relative humidity below 60%. Keep rods away from direct sunlight, UV radiation, and sources of heat that could degrade the epoxy resin matrix. Store vertically in a rack or horizontally on padded supports to prevent bending stress. Avoid contact with solvents, strong chemicals, and moisture. Properly stored rods maintain their mechanical properties indefinitely without degradation.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Engineer Store
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Pultruded Carbon Fiber Rod (Solid) 6mm * 1000mm (Pack of 2) Online in India
Purchase the Pultruded Carbon Fiber Rod (Solid) 6mm * 1000mm (Pack of 2) online at The Engineer Store, India's trusted source for genuine electronics and engineering components. We deliver across Bengaluru